Jump to content

DynDOLOD 3.00 Alpha 182


sheson

Recommended Posts

Running Dyndolod (v3.00 Alpha 95) I get this seam along the top line of the trees. 

I can not figure out the cause of this or how to make it go away, or find anyone else with the same issue.

20220620195110_1.thumb.jpg.6ac1c58abffb3d3a5e0889470e732f02.jpg

It's a little hard to see in the picture because it's only a few pixels thick. Look at the very distant trees around the crosshair. It's more noticeable in game and it flickers as you move. It's as though someone put a straight, horizontal line right at the top of the trees. Or the very top of the invisible 'square' around LODs, like there's an outline. 

The problem seems to be with the lods for trees pine tree 01, pine tree light snow 01. It also affects very distant LODs. Once you get close enough (but where the trees are still LODs) the problem goes away.

Edited by eternalraven
forgot detail about specific model of trees affected
Link to comment
Share on other sites

Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time.  I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. 

The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. 

But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South).  When I disable the Dyndolod plugins, though, I can look at those gates without issue. 

I'm pulling my hair out on this.  My main question is should I concentrate on Dyndolod or are there other issues you think I should check first.

Thanks for your anticipated help.

Link to comment
Share on other sites

1 hour ago, eternalraven said:

Running Dyndolod (v3.00 Alpha 95) I get this seam along the top line of the trees. 

I can not figure out the cause of this or how to make it go away, or find anyone else with the same issue.

20220620195110_1.thumb.jpg.6ac1c58abffb3d3a5e0889470e732f02.jpg

It's a little hard to see in the picture because it's only a few pixels thick. Look at the very distant trees around the crosshair. It's more noticeable in game and it flickers as you move. It's as though someone put a straight, horizontal line right at the top of the trees. Or the very top of the invisible 'square' around LODs, like there's an outline. 

The problem seems to be with the lods for trees pine tree 01, pine tree light snow 01. It also affects very distant LODs. Once you get close enough (but where the trees are still LODs) the problem goes away.

What mod are you using for trees specifically ... what file and version? I had to maximize the image to see what you mean. It's a small horizontal line just above billboard trees.

What is your tree mesh rule?

Try TFC in the console to get closer to the billboard. Please provide the tree name of the affected billboards (e.g., treepineforestsnowl01.nif)

It looks like you could possibly resolve to some extent with an adjustment to TreeMSAlphaThreshold in TexGen_SSE.ini ... maybe 144 or something like that.

I doubt this is a DynDOLOD issue. It's probably the texture UV being off or having some noise where it's not wanted.

Link to comment
Share on other sites

44 minutes ago, Dez756 said:

Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time.  I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. 

The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. 

But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South).  When I disable the Dyndolod plugins, though, I can look at those gates without issue. 

I'm pulling my hair out on this.  My main question is should I concentrate on Dyndolod or are there other issues you think I should check first.

Thanks for your anticipated help.

See forum posting rules in the parent forum and the OP. Log files needed for DynDOLOD. Those will possibly provide useful related xEdit errors.

Link to comment
Share on other sites

Are you using Cutting Room Floor? Both Jk's Skyrim and CRF add the north gate as usable. Dyndolod could be creating files for both gates. I use the patch from JK's Skyrim page. If you are not using it try it out. Others have reported issues with the riften gates with both mods installed such as overlapping. 

Link to comment
Share on other sites

12 hours ago, DarthVitrial said:

Maybe 10% of the time or so?

It is not always the same plugin and record, right?

7 hours ago, BrotherShamus said:

Works perfectly.  Thanks!

Thanks for letting us know. Enjoy.

Link to comment
Share on other sites

7 hours ago, Dez756 said:

Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time.  I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. 

The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. 

But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South).  When I disable the Dyndolod plugins, though, I can look at those gates without issue. 

I'm pulling my hair out on this.  My main question is should I concentrate on Dyndolod or are there other issues you think I should check first.

Thanks for your anticipated help.

I moved the post to the DynDOLOD 3 Alpha thread.
Read the first post which log and debug log to upload when making posts. Pay attention to the log messages and the summary that might open at the end. https://dyndolod.info/Help/Summary-Of-Messages

See the answers for "ILS or CTD" at https://dyndolod.info/FAQ, then read the ..\DynDOLOD\docs\DynDOLOD-README.txt as suggested by one of the answers.

Upload crash log from .NET Script Framework or Crash Logger if you are using game runtime 1.6.x

Link to comment
Share on other sites

8 hours ago, eternalraven said:

Running Dyndolod (v3.00 Alpha 95) I get this seam along the top line of the trees. 

I can not figure out the cause of this or how to make it go away, or find anyone else with the same issue.

The problem seems to be with the lods for trees pine tree 01, pine tree light snow 01. It also affects very distant LODs. Once you get close enough (but where the trees are still LODs) the problem goes away.It's a little hard to see in the picture because it's only a few pixels thick. Look at the very distant trees around the crosshair. It's more noticeable in game and it flickers as you move. It's as though someone put a straight, horizontal line right at the top of the trees. Or the very top of the invisible 'square' around LODs, like there's an outline. 

I moved the post to the DynDOLOD 3 Alpha thread.

Read the first post which log and debug log to upload (both for TexGen and DynDOLOD in this case)

If making screenshots, use tfc to enable the free camera mode to get closer to LOD or if that makes the problem go away, try to use a small fov to "zoom" into the problem.

Double check that no third party billboards are installed. Use TexGen to generate all required and desired billboards. https://dyndolod.info/Help/Tree-Grass-LOD-Billboards#3rd-Party-LOD-Billboards

If you are certain this happens with a billboard generated by TexGen, zip and upload all the billboard files (dds and txt) that Texgen generated.

Link to comment
Share on other sites

Got this error in DYNDOLOD

Error: Item not found while processing ccbgssse020-graycowl.esl ccBGSSSE020FakeDeedActivator "Dresser" [ACTI:FE00B81D]

Pastebin for bugreport.txt - https://pastebin.com/07SnNmCp

Pastebin for \DynDOLOD\Logs\DYNDOLOD_SSE_log.txt - https://pastebin.com/nwvKTGsu

Pastebin for final lines of \DynDOLOD\Logs\DynDOLOD_SSE_Debug_log.txt - https://pastebin.com/TEbfUN29

(zipped Debug_log.txt as an attachment)

[EDIT FOR DETAILS: The placed object/activator in question is changed to "Set Enable State to Opposite of Parent" by DBM_CC_GrayCowlReturnsPatchMGTGCoNPatch.esp which makes the CC gray cowl play well with Manny GT's Gray Cowl and LotD.]

DynDOLOD_SSE_Debug_log.zip

Edited by tarduhaikuadamantivy
Link to comment
Share on other sites

1 hour ago, tarduhaikuadamantivy said:

Ran DYNDOLOD again after posting this to see if I could reproduce the error, but it's working just fine now, so ... no idea what happened there.

Moved the posts to the DynDOLOD 3 Alpha thread.

Can you doublecheck the bugreport.txt is the content of the entire file? It seems a bit short.

If you could also zip and upload the debug log to a file service of the 2nd successful generation, that would help me looking further into what went wrong in the program the first time.

Link to comment
Share on other sites

3 hours ago, sheson said:

I moved the post to the DynDOLOD 3 Alpha thread.
Read the first post which log and debug log to upload when making posts. Pay attention to the log messages and the summary that might open at the end. https://dyndolod.info/Help/Summary-Of-Messages

See the answers for "ILS or CTD" at https://dyndolod.info/FAQ, then read the ..\DynDOLOD\docs\DynDOLOD-README.txt as suggested by one of the answers.

Upload crash log from .NET Script Framework or Crash Logger if you are using game runtime 1.6.x

Thanks!  I'll check these out and get back with the appropriate logs if I can't figure it out.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.