Jump to content

DynDOLOD 3.00 Alpha 182


sheson

Recommended Posts

24 minutes ago, sheson said:

Read the first post which log and debug logs to upload when making posts.

If you have the "same issue" then the solutions/troubleshooting steps are the same, too.

If you really generated terrain LOD meshes with xLODGen, then make sure they have been generated for all worldspaces and are not being overwritten by anything.

Indeed, they are generated for all worldspaces and are loading after all conflicts (just Beyond Reach and Wyrmstooth, presumeably pre-generated terrain textures. I do not have a bugreport.txt. Here are the other logs.

DynDOLOD_SSE_log.txt DynDOLOD_SSE_Debug_log.txt

Link to comment
Share on other sites

7 minutes ago, stein03 said:

Indeed, they are generated for all worldspaces and are loading after all conflicts (just Beyond Reach and Wyrmstooth, presumeably pre-generated terrain textures. I do not have a bugreport.txt. Here are the other logs.

DynDOLOD_SSE_log.txt 411.75 kB · 0 downloads DynDOLOD_SSE_Debug_log.txt 528.99 kB · 0 downloads

The message "Broken Tamriel terrain LOD meshes detected" really means that Oscape terrain LOD meshes are detected as winning overwrites in the loader (typically from Terrain LOD Redone). That really means that not all of these broken terrain LOD meshes are being overwritten by terrain LOD meshes generated by xLODGen.

The solution is to really do what the message explains to do: Permanently remove the broken terrain LOD meshes or use xLODGen to generate terrain LOD meshes to overwrite the broken terrain LOD meshes.

Link to comment
Share on other sites

8 minutes ago, sheson said:

The message "Broken Tamriel terrain LOD meshes detected" really means that Oscape terrain LOD meshes are detected as winning overwrites in the loader (typically from Terrain LOD Redone). That really means that not all of these broken terrain LOD meshes are being overwritten by terrain LOD meshes generated by xLODGen.

The solution is to really do what the message explains to do: Permanently remove the broken terrain LOD meshes or use xLODGen to generate terrain LOD meshes to overwrite the broken terrain LOD meshes.

Yes, I believe you 100%, but that doesn't help troubleshoot. At least not for me. By the way, I am greatly appreciative of your work on this tool and tireless support of the community.

Link to comment
Share on other sites

6 minutes ago, stein03 said:

Yes, I believe you 100%, but that doesn't help troubleshoot. At least not for me. By the way, I am greatly appreciative of your work on this tool and tireless support of the community.

Your suggestion on Terrain LOD Redone worked. I disabled it, and DynDOLOD launched. Oddly, I have had it in my LO for at least a year and still generated LOD several times without conflict. For some reason, the Alpha 111 didnn't like it, or more likely, I managed to change my LO without understanding how. I certainly did not change any priority rules involving it. Thank you again for your help.

Link to comment
Share on other sites

4 minutes ago, stein03 said:

Yes, I believe you 100%, but that doesn't help troubleshoot. At least not for me. By the way, I am greatly appreciative of your work on this tool and tireless support of the community.

"generated for all worldspaces without errors"  the usual troubleshooting step would be to check the xLODGen log for errors, especially from the terrain LOD meshes generation.

"typically from Terrain LOD Redone" the usual troubleshooting step would be to make sure the xLODGen output in the mod manager needs to overwrite all files from Terrain LOD Redone. Another troubleshooting step would be to remove Terrain LOD Redone from the load order.

Link to comment
Share on other sites

20 hours ago, sheson said:

Read the first post which log and debug log to upload when making posts.

https://dyndolod.info/FAQ "Long running time or output several GB in file size"
Crapware installed with graphics drivers is known to prolong running times. Install only the drivers and not any of the bloatware.

I have successfully used an AMD 7900XT to generate DynDOLOD in just 27 minutes for an 830 mod load order. 

The problem was with Alpha 111, as I have successfully used 2.98 to complete this process. 

This narrows it down to the ongoing OpenGL issues with the latest AMD Adrenalin drivers, the ones that are ONLY for the 7000 series, and their OpenGL compatibility with your software. 

The only other potential issue was trying to use Folkvangr, Origins of the Forest, and Cathedral 3D pine grass, which all have Root Blocks of NiNode by default. I know there is a process to bypass this and convert them to BSFadeNode, but pre-caching your grass doesn't allow it to be loaded by the game engine anyway, preventing any CTD's that this website says they may have in this format. 

Wish I had a log for you, but my suggestion is to look into OpenGL on AMD drivers 22.2.1, 22.2.2, and 23.1.1. (The 7000 series-specific drivers). Thanks so much! 

Link to comment
Share on other sites

1 hour ago, PhxFuryKnight said:

I have successfully used an AMD 7900XT to generate DynDOLOD in just 27 minutes for an 830 mod load order. 

The problem was with Alpha 111, as I have successfully used 2.98 to complete this process. 

This narrows it down to the ongoing OpenGL issues with the latest AMD Adrenalin drivers, the ones that are ONLY for the 7000 series, and their OpenGL compatibility with your software. 

The only other potential issue was trying to use Folkvangr, Origins of the Forest, and Cathedral 3D pine grass, which all have Root Blocks of NiNode by default. I know there is a process to bypass this and convert them to BSFadeNode, but pre-caching your grass doesn't allow it to be loaded by the game engine anyway, preventing any CTD's that this website says they may have in this format. 

Wish I had a log for you, but my suggestion is to look into OpenGL on AMD drivers 22.2.1, 22.2.2, and 23.1.1. (The 7000 series-specific drivers). Thanks so much! 

This is why it's important to share your logs as described in the OP.

I use AMD as well 5700XT, and had the same issues with 107 or thereabouts. 111 fixed it for me.

Link to comment
Share on other sites

3 hours ago, PhxFuryKnight said:

I have successfully used an AMD 7900XT to generate DynDOLOD in just 27 minutes for an 830 mod load order. 

The problem was with Alpha 111, as I have successfully used 2.98 to complete this process. 

This narrows it down to the ongoing OpenGL issues with the latest AMD Adrenalin drivers, the ones that are ONLY for the 7000 series, and their OpenGL compatibility with your software. 

The only other potential issue was trying to use Folkvangr, Origins of the Forest, and Cathedral 3D pine grass, which all have Root Blocks of NiNode by default. I know there is a process to bypass this and convert them to BSFadeNode, but pre-caching your grass doesn't allow it to be loaded by the game engine anyway, preventing any CTD's that this website says they may have in this format. 

Wish I had a log for you, but my suggestion is to look into OpenGL on AMD drivers 22.2.1, 22.2.2, and 23.1.1. (The 7000 series-specific drivers). Thanks so much! 

Read the first post which log and debug log to upload when making posts.

If there are no errors there is nothing to look at. If the process takes an exceptionally long time (seems slow) a known cause is the crapware installed with the AMD driver.

Link to comment
Share on other sites

I'm having an issue with Dyndolod not generating any LODs at all... it looks quite sad and frightening.  Usually the zip file generated is over 10GB and takes around 70 minutes (v110), last two attempts (v111) have been just over 5GB and taken around 45 minutes to generate.  Here are the files...

https://ufile.io/4lbj7umx

https://ufile.io/5zm1s2zo

Edited by BrotherShamus
Link to comment
Share on other sites

19 minutes ago, BrotherShamus said:

I'm having an issue with Dyndolod not generating any LODs at all... it looks quite sad and frightening.  Usually the zip file generated is over 10GB and takes around 70 minutes (v110), last two attempts (v111) have been just over 5GB and taken around 45 minutes to generate.  Here are the files...

https://ufile.io/4lbj7umx

https://ufile.io/5zm1s2zo

Read the first post which debug log to upload when making posts.

Why do you believe 5GB of LOD files being generated in 45 minutes means there is an "issue with DynDOLOD not generating any LOD at all"?

The log says:
[44:53] DynDOLOD plugins generated successfully
[44:53] Occlusion.esp completed successfully
[44:53] LODGenx64Win.exe generated object LOD for Blackreach successfully
[44:53] LODGenx64Win.exe generated object LOD for JaphetsFollyWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC01FalmerValley successfully
[44:53] LODGenx64Win.exe generated object LOD for WarlordWorldSkyrimHiddenEstate successfully
[44:53] LODGenx64Win.exe generated object LOD for BlastedLands successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC1HunterHQWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DeepwoodRedoubtWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for Sovngarde successfully
[44:53] LODGenx64Win.exe generated object LOD for SkuldafnWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC2ApocryphaWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC01SoulCairn successfully
[44:53] LODGenx64Win.exe generated object LOD for MarkarthWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC2SolstheimWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for Tamriel successfully
...
[45:29] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\DynDOLOD.esm
[45:30] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\DynDOLOD.esp
[45:40] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\Occlusion.esp

DynDOLOD obviously generated tree, object, dynamic and occlusion according to the chosen settings just fine.

In any case I suggest to pay attention to the messages in the summary.

Link to comment
Share on other sites

1 hour ago, sheson said:

Read the first post which debug log to upload when making posts.

Why do you believe 5GB of LOD files being generated in 45 minutes means there is an "issue with DynDOLOD not generating any LOD at all"?

The log says:
[44:53] DynDOLOD plugins generated successfully
[44:53] Occlusion.esp completed successfully
[44:53] LODGenx64Win.exe generated object LOD for Blackreach successfully
[44:53] LODGenx64Win.exe generated object LOD for JaphetsFollyWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC01FalmerValley successfully
[44:53] LODGenx64Win.exe generated object LOD for WarlordWorldSkyrimHiddenEstate successfully
[44:53] LODGenx64Win.exe generated object LOD for BlastedLands successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC1HunterHQWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DeepwoodRedoubtWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for Sovngarde successfully
[44:53] LODGenx64Win.exe generated object LOD for SkuldafnWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC2ApocryphaWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC01SoulCairn successfully
[44:53] LODGenx64Win.exe generated object LOD for MarkarthWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for DLC2SolstheimWorld successfully
[44:53] LODGenx64Win.exe generated object LOD for Tamriel successfully
...
[45:29] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\DynDOLOD.esm
[45:30] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\DynDOLOD.esp
[45:40] Saving G:\DynDOLOD folder\DynDOLOD\DynDOLOD_Output\Occlusion.esp

DynDOLOD obviously generated tree, object, dynamic and occlusion according to the chosen settings just fine.

In any case I suggest to pay attention to the messages in the summary.

 

In game, there are no LODs... no trees or anything else beyond the loaded cell (except some floating windows).  I read through the logs... my problem is that I don't understand them so I just went through the steps I could follow (cleaning all masters and mods as suggested by loot).  Re-installed Dyndolod and tried to re-generate but same result.  I don't think it's an issue with Dyndolod or this forum would be filled with messages.  I'm clearly making an error somewhere but I don't know where.  I missed uploading the debug file... here it is.

 

https://ufile.io/u1540d75

Link to comment
Share on other sites

20 minutes ago, BrotherShamus said:

In game, there are no LODs... no trees or anything else beyond the loaded cell (except some floating windows).  I read through the logs... my problem is that I don't understand them so I just went through the steps I could follow (cleaning all masters and mods as suggested by loot).  Re-installed Dyndolod and tried to re-generate but same result.  I don't think it's an issue with Dyndolod or this forum would be filled with messages.  I'm clearly making an error somewhere but I don't know where.  I missed uploading the debug file... here it is.

 

https://ufile.io/u1540d75

Provide a screenshot https://dyndolod.info/Official-DynDOLOD-Support-Forum

Doublecheck LOD distances are not zero or very low values in the DynDOLOD MCM settings page https://dyndolod.info/Help/Mod-Configuration-Menu#Settings

SeasonsOfSkyrim https://www.nexusmods.com/skyrimspecialedition/mods/62861 is not installed, correct?

Explanations for log messages can be found at https://dyndolod.info/Messages and also the summary pages https://dyndolod.info/Help/Summary-Of-Messages
If required ask about a specific/particular message in case the explanations are not sufficient or further help is required.

Link to comment
Share on other sites

1 hour ago, sheson said:

Provide a screenshot https://dyndolod.info/Official-DynDOLOD-Support-Forum

Doublecheck LOD distances are not zero or very low values in the DynDOLOD MCM settings page https://dyndolod.info/Help/Mod-Configuration-Menu#Settings

SeasonsOfSkyrim https://www.nexusmods.com/skyrimspecialedition/mods/62861 is not installed, correct?

Explanations for log messages can be found at https://dyndolod.info/Messages and also the summary pages https://dyndolod.info/Help/Summary-Of-Messages
If required ask about a specific/particular message in case the explanations are not sufficient or further help is required.

I'll have another look at the 'messages' and 'summary of messages' pages... I wasn't able to find anything helpful in them first time though (I try to be thorough as I can before posting here).  Here are some screen shots... hopefully they provide some insight... 

edit: forgot to mention... I don't use Seasons of Skyrim.

ScreenShot5.png

ScreenShot6.png

Sorry for the multiple posts...

ScreenShot8.png

Edited by BrotherShamus
Link to comment
Share on other sites

2 hours ago, BrotherShamus said:

I'll have another look at the 'messages' and 'summary of messages' pages... I wasn't able to find anything helpful in them first time though (I try to be thorough as I can before posting here).  Here are some screen shots... hopefully they provide some insight... 

edit: forgot to mention... I don't use Seasons of Skyrim.

ScreenShot5.png

ScreenShot6.png

Sorry for the multiple posts...

ScreenShot8.png

Increase the short fTreeLoadDistance in the DynDOLOD SkyUI MCM Settings page so tree LOD shows further. Increase the fBlock* object LOD distances so that the object LOD levels show further.

Alternatively use the games launcher or BethINI to increase these settings.

Link to comment
Share on other sites

2 hours ago, BrotherShamus said:

I'll have another look at the 'messages' and 'summary of messages' pages... I wasn't able to find anything helpful in them first time though (I try to be thorough as I can before posting here).  Here are some screen shots... hopefully they provide some insight... 

edit: forgot to mention... I don't use Seasons of Skyrim.

ScreenShot5.png

ScreenShot6.png

Sorry for the multiple posts...

ScreenShot8.png

Those [TerrainManager] distance settings look spot on, and fTreeLoadDistance is irrelevant if you are using 'Ultra' option in DynDOLOD. We set our to zero actually.

Check that you have DynDOLOD Output all installed as a mod and that the meshes/textures folders have all the data and the mod is enabled and near the top of your priority in the MO left pane.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.