sheson Posted June 24, 2022 Author Posted June 24, 2022 1 hour ago, ThatWentWell said: ran into an error during DynDOLOD 3.0 LOD generation: Any idea where I could've gone wrong? Log posted below... LODGen_SSE_Tamriel_log.txt 10.6 kB · 0 downloads Read the first post which DynDOLOD log and debug log to upload. Check the Windows Event log.
StarofSweden Posted June 25, 2022 Posted June 25, 2022 Hey, I was just wondering if I could some help turning someone elses mod (.esp+bsa) into a working LOD for use in DynDOLOD, for personal use. I've tried a couple of stuff and looked around quite a bit, could'nt find a guide specificaly for this problem. Basically I want to turn the Snow Elf Tower by buresjakub2003 on Nexus to an LOD so you can see the amazing tower from a far! So if someone where send me a link to a guide or knows the information by heart please do tell! You can find the mod here: https://www.nexusmods.com/skyrimspecialedition/mods/47633?tab=description To clearify, this mod contains an .ESP and two .BSA which i want to turn into LODs, now as for as I know DynDOLOD does not make these into LODs automaticaly so thats why I need sum help with this. Also note that this is quite a large structure outside of the bounderies (I believe) of the regular Tamriel border but it is still in the worldspace of Tamriel. Thanks for any help!
sheson Posted June 25, 2022 Author Posted June 25, 2022 52 minutes ago, StarofSweden said: Hey, I was just wondering if I could some help turning someone elses mod (.esp+bsa) into a working LOD for use in DynDOLOD, for personal use. I've tried a couple of stuff and looked around quite a bit, could'nt find a guide specificaly for this problem. Basically I want to turn the Snow Elf Tower by buresjakub2003 on Nexus to an LOD so you can see the amazing tower from a far! So if someone where send me a link to a guide or knows the information by heart please do tell! You can find the mod here: https://www.nexusmods.com/skyrimspecialedition/mods/47633?tab=description To clearify, this mod contains an .ESP and two .BSA which i want to turn into LODs, now as for as I know DynDOLOD does not make these into LODs automaticaly so thats why I need sum help with this. Also note that this is quite a large structure outside of the bounderies (I believe) of the regular Tamriel border but it is still in the worldspace of Tamriel. Thanks for any help! Obviously it would be best to create dedicated LOD models. Otherwise use mesh mask rules to use the full model for LOD. Read these: https://dyndolod.info/DynDOLOD-Reference#5-Scan-worldspace https://dyndolod.info/Help/Mesh-Mask-Reference-Rules https://dyndolod.info/Mod-Authors Ask specific questions if further help is required.
CinnabonGhoul Posted June 25, 2022 Posted June 25, 2022 Been getting this in texgen and I don't know how to fix it: Error: File not found textures\dlc02\architecture\edgetrim\WoodEdgeTrim01_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\dlc02\architecture\edgetrim\WoodEdgeTrim01_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow.nif Dragonborn.esm DLC2TreePineShortHeavySnow [STAT:0403383D] Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow.nif Dragonborn.esm DLC2TreePineShortHeavySnow [STAT:0403383D] Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow01.nif Dragonborn.esm DLC2TreePineShortHeavySnow01 [STAT:0403383C] Error: File not found textures\landscape\trees\vurt_oldgreybark.dds. Error: File not found textures\yamadori\TundraDriftWoodBark01_N.dds. Used by Meshes\yamadori\gkbreachclifftree04.nif Markarth Side - Resort City.esp 00_TreeReachCliffTree04 [TREE:FE0E280C]
sheson Posted June 25, 2022 Author Posted June 25, 2022 42 minutes ago, CinnabonGhoul said: Been getting this in texgen and I don't know how to fix it: Error: File not found textures\dlc02\architecture\edgetrim\WoodEdgeTrim01_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\dlc02\architecture\edgetrim\WoodEdgeTrim01_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by dyndolod\render\billboards\dyndolod\lod\trees\treepineforestbroken06_09e933e6_trunk.nif Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow.nif Dragonborn.esm DLC2TreePineShortHeavySnow [STAT:0403383D] Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow.nif Dragonborn.esm DLC2TreePineShortHeavySnow [STAT:0403383D] Error: File not found textures\landscape\trees\TreePineForestBarkCompSnow_p.dds. Used by Meshes\dlc02\landscape\trees\dlc2treepineshortheavysnow01.nif Dragonborn.esm DLC2TreePineShortHeavySnow01 [STAT:0403383C] Error: File not found textures\landscape\trees\vurt_oldgreybark.dds. Error: File not found textures\yamadori\TundraDriftWoodBark01_N.dds. Used by Meshes\yamadori\gkbreachclifftree04.nif Markarth Side - Resort City.esp 00_TreeReachCliffTree04 [TREE:FE0E280C] Read the first post which entire log and debug log to upload when making posts. https://dyndolod.info/Messages/File-Not-Found-Textures File not found errors can be fixed by installing the missing files. Look up the NIF in MO2 right window data tab to know which mod has problems or was not installed correctly (or is missing requirements) or just refer directly to the plugin name.
StarofSweden Posted June 25, 2022 Posted June 25, 2022 3 hours ago, sheson said: Obviously it would be best to create dedicated LOD models. Otherwise use mesh mask rules to use the full model for LOD. Read these: https://dyndolod.info/DynDOLOD-Reference#5-Scan-worldspace https://dyndolod.info/Help/Mesh-Mask-Reference-Rules https://dyndolod.info/Mod-Authors Ask specific questions if further help is required. So, I could not find any specific way to convert the NIFS to specific lods, maybe Im just stupid but for Mesh Rules, would I need to get a mesh rule for each and every nif? Or would a rule like "Meshes/xxx/" where the rule applies to everyting in that folder?
CinnabonGhoul Posted June 25, 2022 Posted June 25, 2022 3 hours ago, sheson said: Read the first post which entire log and debug log to upload when making posts. https://dyndolod.info/Messages/File-Not-Found-Textures File not found errors can be fixed by installing the missing files. Look up the NIF in MO2 right window data tab to know which mod has problems or was not installed correctly (or is missing requirements) or just refer directly to the plugin name. So I've found the mod that is giving me the first message but what do I do now that I know what it is? It's the noble skyrim 2k mod. Do I need to reinstall the mod? Is it a load order thing?
DarthVitrial Posted June 26, 2022 Posted June 26, 2022 On 6/23/2022 at 2:11 AM, sheson said: I didn't try to reproduce yet but see what happens with this test version https://mega.nz/file/1Ap1xSIJ#0rH-NiyQAD5QdWvDlgPb6l3I8cldU9vF4NK5mH5AL0o Hard to tell for sure, but it seems to work.
z929669 Posted June 26, 2022 Posted June 26, 2022 5 hours ago, CinnabonGhoul said: So I've found the mod that is giving me the first message but what do I do now that I know what it is? It's the noble skyrim 2k mod. Do I need to reinstall the mod? Is it a load order thing? You need to RTFM or follow a guide to explain the key points of the manual. See our SSE guide linked int the top nav. It goes into how to generate LOD and set up the required software. Posting here is for those testing the DynDOLOD 3 alpha or for those using it that have some idea of how it all works.
z929669 Posted June 26, 2022 Posted June 26, 2022 I'm immediately getting this event just after hitting 'OK' when running Alpha 95. It's processing as notmal otherwise. This is 100% reproducible. I will post logs once complete; Spoiler Log Name: Application Source: .NET Runtime Date: 6/26/2022 12:04:18 AM Event ID: 1023 Task Category: None Level: Error Keywords: Classic User: N/A Computer: DHVP Description: Description: A .NET application failed. Application: LODGenx64Win.exe Path: C:\Modding\Tools\DynDOLOD\Edit Scripts\LODGenx64Win.exe Message: Failure processing application bundle. Bundle header version compatibility check failed. A fatal error occured while processing application bundle Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name=".NET Runtime" /> <EventID Qualifiers="0">1023</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2022-06-26T05:04:18.6701517Z" /> <EventRecordID>141136</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>DHVP</Computer> <Security /> </System> <EventData> <Data>Description: A .NET application failed. Application: LODGenx64Win.exe Path: C:\Modding\Tools\DynDOLOD\Edit Scripts\LODGenx64Win.exe Message: Failure processing application bundle. Bundle header version compatibility check failed. A fatal error occured while processing application bundle </Data> </EventData> </Event> Got this bugreport shortly after posting. Strangely, DynDOLOD is still processing: bugreport.txt I'm shutting it down and attempting to repeat. Updating to the latest .NET 6.06 desktop runtime seems to have resolved the event posted previously .NET update resolved all of my issues. Finished processing as normal. So after seeing "Additional Requirements" in your doc, I see now that LODGenx64Win requiires .NET 6.0 (which I had, BTW but not updated to 6.0.6). Now what I want to know is how/why is DynDOLOD using this version instead of LODGenx64 on my box. I'm on Win 10.
sheson Posted June 26, 2022 Author Posted June 26, 2022 8 hours ago, StarofSweden said: So, I could not find any specific way to convert the NIFS to specific lods, maybe Im just stupid but for Mesh Rules, would I need to get a mesh rule for each and every nif? Or would a rule like "Meshes/xxx/" where the rule applies to everyting in that folder? LOD models are NIF. A typical way to create LOD models is to use Blender or 3DSMax (maybe with additional 3rd party plugins) to create LOD models. Read the links I provided. In particular https://dyndolod.info/Help/Mesh-Mask-Reference-Rules#Mesh-Mask The mesh mask is any part of the path/to/model.nif of a full model defined on a base record. It does not use wildcards and simply matches any part of the entire path. Entering the term tree into the field means this rule will match any filename that has the term tree in it but also any other NIF that might be in a folder that has the term tree in it as well, regardless of the filename. Note that Meshes is not part of the path/to/model.nif defined on the base record.
sheson Posted June 26, 2022 Author Posted June 26, 2022 7 hours ago, CinnabonGhoul said: So I've found the mod that is giving me the first message but what do I do now that I know what it is? It's the noble skyrim 2k mod. Do I need to reinstall the mod? Is it a load order thing? Read the description, documentation, install instructions, requirements of mod and use their comments, forum etc. for help with them. 4 hours ago, DarthVitrial said: Hard to tell for sure, but it seems to work. That is promising. Thanks for letting us know.
tarduhaikuadamantivy Posted June 26, 2022 Posted June 26, 2022 Back again with another error in generation (this time with notifications turned on so that I see when someone replies), happened after it loads base record swaps: [01:47] Loaded 286 base record swaps [01:49] Created a summary of log messages C:\ModTools\DynDOLOD\Summary\DynDOLOD_Index.html. Access violation at address 0000000000E95065 in module 'DynDOLODx64.exe'. Read of address 0000000000000000 Error: Access violation at address 0000000000E95065 in module 'DynDOLODx64.exe'. Read of address 0000000000000000. Has happened a few times in a row, even after a fresh restart of my system. Pastebin for bugreport.txt (I included the logs of the 3 times that it threw the error) https://pastebin.com/4zUFym6c Pastebin for SSE_log.txt https://pastebin.com/HQzxk0T5 SSE_Debug_log.txt uploaded as a .zip since it's too big for pastebin. DynDOLOD_SSE_Debug_log.zip
sheson Posted June 26, 2022 Author Posted June 26, 2022 3 hours ago, tarduhaikuadamantivy said: Back again with another error in generation (this time with notifications turned on so that I see when someone replies), happened after it loads base record swaps: [01:47] Loaded 286 base record swaps [01:49] Created a summary of log messages C:\ModTools\DynDOLOD\Summary\DynDOLOD_Index.html. Access violation at address 0000000000E95065 in module 'DynDOLODx64.exe'. Read of address 0000000000000000 Error: Access violation at address 0000000000E95065 in module 'DynDOLODx64.exe'. Read of address 0000000000000000. Has happened a few times in a row, even after a fresh restart of my system. Pastebin for bugreport.txt (I included the logs of the 3 times that it threw the error) https://pastebin.com/4zUFym6c Pastebin for SSE_log.txt https://pastebin.com/HQzxk0T5 SSE_Debug_log.txt uploaded as a .zip since it's too big for pastebin. DynDOLOD_SSE_Debug_log.zip 2.75 MB · 0 downloads Load the load order in xEdit and check it for errors. Fix the unresolved form ID errors and the records being overriden. It is most likely caused by a wrong version of RealisticWaterTwo - Open Cities.esp or wrong version of its master plugins. See if it runs through then.
ThatWentWell Posted June 26, 2022 Posted June 26, 2022 getting c000005 error at the end of DynDOLOD LOD generation for Tamriel, Windows event log points me to: Quote Faulting application name: LODGenx64.exe, version: 3.0.9.0, time stamp: 0xccdd0dff Faulting module name: clr.dll, version: 4.8.4515.0, time stamp: 0x624ce98e Exception code: 0xc0000005 Fault offset: 0x000000000002f9b7 Faulting process id: 0x35e0 Faulting application start time: 0x01d8897141e90e11 Faulting application path: D:\DynDOLOD\Edit Scripts\LODGenx64.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: fe284b5a-1e52-4c50-b9a7-8e83878b9ff4 Faulting package full name: Faulting package-relative application ID: Any idea how to approach this? It's been bugging me for days now
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now