DynDOLOD 3.00 Alpha 198

[jiggajigga82]

21 minutes ago, sheson said:

https://dyndolod.info/Installation-Instructions
Use 7-Zip to unpack the DynDOLOD Standalone archive into a new and empty 'DynDOLOD' directory ...

Do not unpack into folder already still containing older versions.

There seems to be a worldspace with weird wordspace bounds https://dyndolod.info/Messages/Worldspace-Bounds.
Unfortunately the log does not hint which one. You might spot it if you check the worldspace records in xEdit. Next version will try to print which worldspace has the issue.
The error does not affect the TexGen output anymore, so you can use it.

What happens when you run DynDOLOD? There should be a similar error?

Thank you for the quick response! I just deleted the previous installation and did a fresh extract.

I'll take a look in xEdit.

I don't get much TexGen output, or do you mean I should use what's there to test DynDOLOD?

 

Edited November 11, 2022 by jiggajigga82

[sheson]

12 minutes ago, jiggajigga82 said:

Thank you for the quick response! I just deleted the previous installation and did a fresh extract.

I'll take a look in xEdit.

I don't get much TexGen output, or do you mean I should use what's there to test DynDOLOD?

Yes, it is possible that DynDOLOD has a more information when it encounters the same problem.

[jiggajigga82]

21 minutes ago, sheson said:

Yes, it is possible that DynDOLOD has a more information when it encounters the same problem.

Same error in DynDOLOD

Bug Report: https://ufile.io/rav3jxk1

Log: https://ufile.io/lrtk0i5h

Debug Log: https://ufile.io/zyp77kti

The last worldspace referenced in the log is the new mod that expands Saints and Seducers.

For reference: https://www.nexusmods.com/skyrimspecialedition/mods/72772/

Update: I removed the aforementioned mod and TexGen doesn't error out right away. Still running...

Edited November 11, 2022 by jiggajigga82

[sheson]

18 minutes ago, jiggajigga82 said:

Same error in DynDOLOD

Bug Report: https://ufile.io/rav3jxk1

Log: https://ufile.io/lrtk0i5h

Debug Log: https://ufile.io/zyp77kti

The last worldspace referenced in the log is the new mod that expands Saints and Seducers.

For reference: https://www.nexusmods.com/skyrimspecialedition/mods/72772/

Update: I removed the aforementioned mod and TexGen doesn't error out right away. Still running...

Run this test version of TexGen https://mega.nz/file/xEJBTarA#zQPw9J9g4VZqnRlnTevplIrnaHyaZqtsvL3rdIBsnbk

It should mention the worldspace the error happens in. Then check the Object Bounds of all plugins modifying that worldpace.

[jiggajigga82]

24 minutes ago, sheson said:

Run this test version of TexGen https://mega.nz/file/xEJBTarA#zQPw9J9g4VZqnRlnTevplIrnaHyaZqtsvL3rdIBsnbk

It should mention the worldspace the error happens in. Then check the Object Bounds of all plugins modifying that worldpace.

 

I attached screenshots of the xEdit record headers of the respective records that modify the worldspace.

Bug report: https://ufile.io/uura8iyl

TexGen log: https://ufile.io/ys466lak

Debug log: https://ufile.io/ebzbax9x

[Window Title]
TexGen

[Main Instruction]
Error: Range check error while processing worldspace bounds Skyrim Extended Cut - Saints and Seducers.esp ECSSzDummyMarkerWorld [WRLD:1655C4B3]

[Content]

Click on this link for additional explanations and help for this message

[Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

[sheson]

17 minutes ago, jiggajigga82 said:

 

I attached screenshots of the xEdit record headers of the respective records that modify the worldspace.

Bug report: https://ufile.io/uura8iyl

TexGen log: https://ufile.io/ys466lak

Debug log: https://ufile.io/ebzbax9x

[Window Title]
TexGen

[Main Instruction]
Error: Range check error while processing worldspace bounds Skyrim Extended Cut - Saints and Seducers.esp ECSSzDummyMarkerWorld [WRLD:1655C4B3]

[Content]

Click on this link for additional explanations and help for this message

[Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

For time being, set the bounds to valid numbers like 0.

[jiggajigga82]

5 minutes ago, sheson said:

For time being, set the bounds to valid numbers like 0.

NAM0 and NAM9, correct?

[sheson]

1 minute ago, jiggajigga82 said:

NAM0 and NAM9, correct?

Yes, replace both the "default" and "min"

[jiggajigga82]

4 minutes ago, sheson said:

Yes, replace both the "default" and "min"

Great! Thank you for walking me through it. Should I report this to the authors or will you get in touch with them?

[sheson]

5 minutes ago, jiggajigga82 said:

Great! Thank you for walking me through it. Should I report this to the authors or will you get in touch with them?

The worldspace has no temporary cells, so that is probably why the bounds are undefined. Not sure if this is a CK bug or just a wild edit or something undefined and if/what the consequences are. Next version will just continue.

[jiggajigga82]

44 minutes ago, sheson said:

The worldspace has no temporary cells, so that is probably why the bounds are undefined. Not sure if this is a CK bug or just a wild edit or something undefined and if/what the consequences are. Next version will just continue.

Gotcha. Thanks, again!

[Lageron]

Hello to all friendly and helpful fellows of the site!

Recently i've had an issue with "Range Check Error" popping up when i try to use TexGen (64)...

It specifically happens when the program starts trying to convert trees, and at first i thought it was an issue with Seasons of Skyrim + Happy Little Trees (Yes i used the patch) that made it occur, so- I switched over to The Wildlands of Skyrim without any seasons and retried.

Same issue.

Weird thing is this worked just yesterday, i've changed tree mods, verified game files yet nothing works T-T 

Any help would be appreciated!

 

Files not found Textures.txt

[xcal68]

You recently install Skyrim Extended Cut - Saints and Seducers?  It happens to me, too, but only with that mod enabled.  I tested with only that mod enabled, too.

Edit - Addressed here: 

 

Edited November 12, 2022 by xcal68

[BISOM]

9 hours ago, sheson said:

Why do you keep posting screenshots of TexGen that shows the prompt? It seems to be working.

When the DynDOLOD messages window shows like this, it does not react to mouse or keyboard? Can you move the scroll bar down? Is there any CPU usage in the task manager?

After starting DynDOLOD, either the wizard or advanced options window shows. When you click cancel, there will be a prompt to asking to exit, check log or restart. Does that work?

See what happens if you do not select to generate Occlusion.

1) When the DynDOLOD messages window shows like this, it does not react to mouse or keyboard? Can you move the scroll bar down? Is there any CPU usage in the task manager?

I can scroll and move every windows, even write on it. Task manager looks like this. there's no prmpt.

2) After starting DynDOLOD, either the wizard or advanced options window shows. When you click cancel, there will be a prompt to asking to exit, check log or restart. Does that work?

It runs normaly, promt show up ask me to exit, check log or restart. 

 

 

3)See what happens if you do not select to generate Occlusion

after unchecked occlusion, running time faster, but still no prompt.

Edited November 12, 2022 by BISOM

[sheson]

5 hours ago, Lageron said:

Hello to all friendly and helpful fellows of the site!

Recently i've had an issue with "Range Check Error" popping up when i try to use TexGen (64)...

It specifically happens when the program starts trying to convert trees, and at first i thought it was an issue with Seasons of Skyrim + Happy Little Trees (Yes i used the patch) that made it occur, so- I switched over to The Wildlands of Skyrim without any seasons and retried.

Same issue.

Weird thing is this worked just yesterday, i've changed tree mods, verified game files yet nothing works T-T 

Any help would be appreciated!

Moved to the DynDOLOD 3 Alpha thread.

As explained on the first post use search to find similar questions and answers.

See https://stepmodifications.org/forum/topic/17510-dyndolod-300-alpha-105/?do=findComment&comment=265437 and set the object bounds to 0 as explained in the replies.