phazer11

Added the enblocal stuff to a spoiler. Man I wish it were easier for new users to add spoilers. It's [spoiler] Text Here [/spoiler]by the way.

Just wanted to say I was doing a few speed runs yesterday (God Mode with speedmult 500 or speedmult 1000) with my SR:LE + REGs combo and am either CTD'ing or freezing in the area south of Kynesgrove (the steam pits with all the giants and Saber Cats). I'm using LOOT for my load order so maybe I don't have a rule or so I need. I've checked my patches a few times but don't see any glaring issues. To be triple sure I looked at the REGS, SR:LE, SR:LE + REGS and SR:LE + REGS + ENB guides to see if someone thought of something I didn't. I'd tell you if it were a VRAM overload if I could but I can't tell since I have to log out to unfreeze it so Skyrim Performance Monitor tell me anything. I'm using 1k textures in exteriors and when I don't get freezes I'm getting 57-60 FPS outdoors with eNB enabled, SPM says it's usually at 2.8GB VRAM out of 3GB but idk how trust worthy it is since as far as I can tell it won't give me a straight answer about how much RAM it's using even with "Combine TESV and ENBHost system RAM" on in SPM. Ideas?

Check you enblocal.ini (which you should have if you followed the guide for ENBoost) and make sure that the frame rate limiter is not turned on.

Yeah to be honest I didn't know about the one year warranty on PNY (haven't bought one in ages). EVGA 760 4GB all the way then unless you can get a EVGA 770 4GB for about the same price as the PNY one. Onboard audio especially on the ROG series such as the VI Hero is pretty good. The only reason I'd see getting a sound card is for voice recording (and even then it's a maybe since I haven't tried recording audio on it) as for otherwise (when I'm not messing with the onboard) I use my graphics cards HDMI port as my audio and since it supports bitstreaming it's perfect for my surround sound (what my PC is hooked up to).

Just wanted to say I was doing a few speed runs today (God Mode with speedmult 500 or speedmult 1000) with my SR:LE + REGs combo and am either CTD'ing or freezing in the area south of Kynesgrove (the steam pits with all the giants and Saber Cats). I'm using LOOT for my load order so maybe I don't have a rule or so I need. Checked my patches a few times but don't see anything glaring. I've checked. REGS, SR:LE, SR:LE + REGS and SR:LE + REGS + ENB guides to see if someone thought of something I didn't but no ideas. I'd tell you if it were a VRAM overload if In could but I can't tell since I have to log out to unfreeze it so Skyrim Performance Monitor tell me anything.

I can imagine a headache coming from adding in SkyTEST it's already not completely stable without them (from my speed runs).

Actually tech if you look on the PC part picker the 4GB PNY GTX 770 is only $60 more than the GTX 760 4GB. I prefer EVGA to PNY but whichever PNY is mostly reference with no special coolers or anything if I remember correctly.

Try asking over here, and welcome to the forums. https://forum.step-project.com/topic/2967-requiem-with-srle/

I get LARGE FPS drops with JK's Whiterun and I've thouroughly eliminated all other culprits. I'm using SRLE (ish) + REGS with 1k exterior textures (similar to Nearox's SRLE + REGS for medium systems guide I guess I didn't actually follow it but it's close only noticed it after I had installed already). On the steps to Dragonsreach (next to the brazier on the landing overlooking Gildergreen) I go from 60 FPS (my FPS could actually be higher but I wouldn't see it do to VSync) to between 26 and 30 FPS . One of the other intensive areas is right around Warmaidens where it dips to ~42 FPS. Another is the tree added right out side of the Temple of Kynareth and the Grey-Mane's house. For the record. I get an almost constant 60 FPS outdoors with ENB on my system specs are in my signature. This is after the issues with FPS I was having the past few days, turns out my graphics card wasn't getting enough juice. I'll probably send it in for an RMA if it needs any more adjustments but I can at least say it's not the card anymore.

Well. Best Buy price matches (Newegg, Amazon and a few other places if you call them for online orders or tell them as you're checking out in the store) and most of their stores have some of the components. I'd go with something like this. https://pcpartpicker.com/user/phazer11/saved/xdstt6 I've put the best prices in right now (more or less depending on how close the prices for Amazon, Newegg, Best Buy were). You should be able to have them price match it. The only part Best Buy doesn't have is the motherboard. They do have some EVGA motherboards but I'd have to research them some to see if they are the good EVGA models.

You're using the SKSE .ini, and other ini edits, as well as having completed the Conflict Resolution portion of Neo's guide?

Well first off. You can't run Skyrim Performance Monitor through Mod Organizer. You have to run Mod Organizer through Skyrim Performance Monitor by point Skyrim Performance Monitor to your Mod Organizer executable under setup (the file paths tab) you'll need to point both the "Skyrim Main Program File Path:" and "Skyrim Launcher File Path:" to your ModOrganizer.exe I'll add this to the wiki. I'd also set the flag for detailed instructions available but... I don't have permissions to do so. As for the start up issue... weird. Try telling Steam to verify the files.

I edited it. Hope it's more clear now.

Aren't bashed tags seen by other tools other than WB (i.e. BOSS, LOOT)? I was under the impression that the tags were added to the plugin's metadata. So for now, I would imagine adding the tags via WB so Mator Smash could do it's work would do for now. Of course ideally once the tool gets to that point it would be nice to eliminate the need for WB all together. Unless the script in it's current state can't process the tags at present of course. Also, yes I'm excited as well.

Looks interesting. I could see the Empire investing in better roads. The Romans did it as well.

You could maybe include a link to the post you're talking about irish there are over 100 pages there.

Maybe 5 FPS dip? Still not 100% sure as I'm having some issues elsewhere. There were a few places I dropped to 15 but that was before I copied TechAngel's .ini files. One of them was going up the steps to Dragonsreach. One was on the steps looking into the courtyard (the intensive spot) and the other... I can't remember but I think it was by Breezehome. Of course, it could have to do with this I'm not sure what texture it is though.

I'll have to look at the mod you mentioned Nearox. But, first I have to figure out why I'm CTDing as the start menu loads as this load order worked earlier today and everything loads fine in TES5Edit so it's not missing any masters and I rebuilt the bashed patch, DSR and FNIS.

Anyone know of any mods that edit the vanilla homes like Breezhome that have ELFX compatibility and don't conflict with any of the Whiterun overhauls? Tall order I know.

Have you tried double clicking the mod and installing it? MO downloads pane shows the file name not the mod name (by default). I think all you have to do to fix it is click the wrench icon in MO (the settings icon) and go to General -> User Interface and click the check box next to Download Meta Information.

*play At any rate I'll have to look at it further since I'm getting 20FPS outdoors for some reason. It was closer to 50FPS (with ENB and Tech's .ini's) before which is reasonable as I'm on a system with a GTX 780 Classified 3GB and a 4770k playing at 1080P

I think I fixed it (maybe I'll have to lay with it some more) by reinstalling using the external FOMOD installer. It looks better here at least.

Nope.

I think it's set to default. Here's the latest set of screenshots with that new prepass file. https://s451.photobucket.com/user/animer/library/Vividian%20Blur%20PT2

Yeah it's there. I'll delete the one in there and plop the one you just sent over on in.