tamrieltwo Posted October 22, 2023 Share Posted October 22, 2023 I'm getting an issue: DynDOLOD is choosing the wrong passthru_lod file. It's choosing pinus04_599919f0passthru_lod_80pct.nif (an old file in the same folder that I renamed) instead of pinus04_599919f0passthru_lod.nif. Why's this? This is my 3D LODs folder: pinus04 in Tree Report: Quote TreePineForest04 "pinus 04" [TREE:0004FBB0] Meshes\landscape\trees\nature_of_the_wild_lands\pinus\pinus04.nif [CRC32:599919F0] using textures\true forest\pinus\new\atlas_pine.dds, textures\true forest\pinus\new\atlas_pine_n.dds, textures\true forest\pinus\new\atlas_pine_sk.dds, textures\true forest\pinus\new\cap.dds, textures\true forest\pinus\new\cap_n.dds, textures\true forest\pinus\new\trunk_3.dds, textures\true forest\pinus\new\trunk_3_n.dds, textures\true forest\pinus\new\bark_4.dds, textures\true forest\pinus\new\bark_4_n.dds New tree, Billboard found, 3D LOD model found Billboard_0: textures\terrain\lodgen\skyrim.esm\pinus04_0004fbb0.dds, textures\default_n.dds Billboard_1: textures\terrain\lodgen\skyrim.esm\pinus04_0004fbb0_1.dds, textures\terrain\lodgen\skyrim.esm\pinus04_0004fbb0_1_n.dds Billboard_2: textures\terrain\lodgen\skyrim.esm\pinus04_0004fbb0_2.dds, textures\terrain\lodgen\skyrim.esm\pinus04_0004fbb0_2_n.dds Level0: meshes\dyndolod\lod\trees\pinus04_599919f0passthru_lod_80pct.nif [CRC32:9B3E1EF8] using textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1_n.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2_n.dds, textures\true forest\pinus\new\atlas_pine.dds, textures\true forest\pinus\new\atlas_pine_n.dds, textures\true forest\pinus\new\atlas_pine_sk.dds Level1: meshes\dyndolod\lod\trees\pinus04_599919f0passthru_lod_80pct.nif [CRC32:9B3E1EF8] using textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1_n.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2_n.dds, textures\true forest\pinus\new\atlas_pine.dds, textures\true forest\pinus\new\atlas_pine_n.dds, textures\true forest\pinus\new\atlas_pine_sk.dds Level2: meshes\dyndolod\lod\trees\pinus04_599919f0passthru_lod_80pct.nif [CRC32:9B3E1EF8] using textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_1_n.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2.dds, textures\dyndolod\lod\trees\nature of the wild lands 2.0 - deleted 3d lods\pinus04_599919f0_trunk_2_n.dds, textures\true forest\pinus\new\atlas_pine.dds, textures\true forest\pinus\new\atlas_pine_n.dds, textures\true forest\pinus\new\atlas_pine_sk.dds Dynamic: Meshes\landscape\trees\nature_of_the_wild_lands\pinus\pinus04.nif [CRC32:599919F0] using textures\true forest\pinus\new\atlas_pine.dds, textures\true forest\pinus\new\atlas_pine_n.dds, textures\true forest\pinus\new\atlas_pine_sk.dds, textures\true forest\pinus\new\cap.dds, textures\true forest\pinus\new\cap_n.dds, textures\true forest\pinus\new\trunk_3.dds, textures\true forest\pinus\new\trunk_3_n.dds, textures\true forest\pinus\new\bark_4.dds, textures\true forest\pinus\new\bark_4_n.dds Mask: tree File: C:\Games\Modding\DynDOLOD 3\Edit Scripts\DynDOLOD\Rules\DynDOLOD_SSE_Medium.ini LOD4: Level0 LOD8: Billboard1 using internal LOD16: Billboard1 using internal Full logs: https://file.io/fS0zu3pc2CvD pinus04_599919f0passthru_lod.nif: pinus04_599919f0passthru_lod.nif pinus04_599919f0passthru_lod_80pct.nif: pinus04_599919f0passthru_lod_80pct.nif Link to comment Share on other sites More sharing options...
sheson Posted October 22, 2023 Author Share Posted October 22, 2023 2 hours ago, tamrieltwo said: I'm getting an issue: DynDOLOD is choosing the wrong passthru_lod file. It's choosing pinus04_599919f0passthru_lod_80pct.nif (an old file in the same folder that I renamed) instead of pinus04_599919f0passthru_lod.nif. Why's this? This is my 3D LODs folder: pinus04 in Tree Report: Full logs: https://file.io/fS0zu3pc2CvD pinus04_599919f0passthru_lod.nif: pinus04_599919f0passthru_lod.nif pinus04_599919f0passthru_lod_80pct.nif: pinus04_599919f0passthru_lod_80pct.nif This is because filenames with numbers that it tries to apply to lod levels take priority. If you want to ensure that a nif in the data\meshes folder is not used use MO2 hide feature. Link to comment Share on other sites More sharing options...
Foris Posted October 22, 2023 Share Posted October 22, 2023 Hi. I need some help. In the past I was using DynDOLOD-Standalone.3.00-Alpha-58, it was working well, not a problem to be found when playing. But I added a mod that requires rerunning dyndolod so I tried but I got the error "version expired". After installing a new version I got error that there was a problem with Update.esm and USSEP... (Skyrim VR + USSEP 4.1.2a) I don't want to deal with this as I don't care if there is a problem as I never got CTD when I played last time (over 40h playtime). So the question is simple, how to disable "version expired" check in older versions? It was working fine enough for me and I don't see a reason to deal with the new version. Link to comment Share on other sites More sharing options...
Mousetick Posted October 22, 2023 Share Posted October 22, 2023 Hi sheson, It seems you may have missed a problem report I posted a couple days ago. Could you take a look at it please when you get a chance? Thanks in advance for your attention. Link to comment Share on other sites More sharing options...
sheson Posted October 22, 2023 Author Share Posted October 22, 2023 11 hours ago, Foris said: Hi. I need some help. In the past I was using DynDOLOD-Standalone.3.00-Alpha-58, it was working well, not a problem to be found when playing. But I added a mod that requires rerunning dyndolod so I tried but I got the error "version expired". After installing a new version I got error that there was a problem with Update.esm and USSEP... (Skyrim VR + USSEP 4.1.2a) I don't want to deal with this as I don't care if there is a problem as I never got CTD when I played last time (over 40h playtime). So the question is simple, how to disable "version expired" check in older versions? It was working fine enough for me and I don't see a reason to deal with the new version. https://dyndolod.info/FAQ#Older-versions https://dyndolod.info/Mods/Skyrim-VR Link to comment Share on other sites More sharing options...
sheson Posted October 22, 2023 Author Share Posted October 22, 2023 1 hour ago, Mousetick said: Hi sheson, It seems you may have missed a problem report I posted a couple days ago. Could you take a look at it please when you get a chance? Thanks in advance for your attention. Remind me again by end of the week if still nessesssry. Link to comment Share on other sites More sharing options...
Foris Posted October 22, 2023 Share Posted October 22, 2023 I understand your point, but this is my point. I'm a working adult with limited free time. I have a working mod list (nearly 400 mods) and I found will and a few hours of free time to play today. I haven't played Skyrim for over half a year and want to spend relaxing time but I can't because of course something broke. And because I deleted the output just before I started creating a new one, I cannot even come back to the working version. Well, today is too late to play anyway, tomorrow I have work so most likely come back to Skyrim after another few months... Or never :/ Link to comment Share on other sites More sharing options...
sheson Posted October 22, 2023 Author Share Posted October 22, 2023 33 minutes ago, Foris said: I understand your point, but this is my point. I'm a working adult with limited free time. I have a working mod list (nearly 400 mods) and I found will and a few hours of free time to play today. I haven't played Skyrim for over half a year and want to spend relaxing time but I can't because of course something broke. And because I deleted the output just before I started creating a new one, I cannot even come back to the working version. Well, today is too late to play anyway, tomorrow I have work so most likely come back to Skyrim after another few months... Or never :/ Your broken load order problems and inability to play has nothing to do with DynDOLOD. Link to comment Share on other sites More sharing options...
Foris Posted October 22, 2023 Share Posted October 22, 2023 Well, if one version is working and the other is not, then if you limit access to an older version for no reason then it is a problem with Dyndolod. Maybe is better that now it recognizes errors that earlier were not spotted but so what if it were my problem if it will cause problems for me alone? In the end, I'm not here to convince you, I want only to rant a little. EOT, have a nice day. Link to comment Share on other sites More sharing options...
sheson Posted October 23, 2023 Author Share Posted October 23, 2023 9 hours ago, Foris said: Well, if one version is working and the other is not, then if you limit access to an older version for no reason then it is a problem with Dyndolod. Maybe is better that now it recognizes errors that earlier were not spotted but so what if it were my problem if it will cause problems for me alone? In the end, I'm not here to convince you, I want only to rant a little. EOT, have a nice day. No, the problems are the broken load order and that the requirements to use DynDOLOD are not met. If you want to "play" with the broken load order, do not use DynDOLOD. Link to comment Share on other sites More sharing options...
OriginalNuttah Posted October 24, 2023 Share Posted October 24, 2023 (edited) Also experiencing Open GL error after updating Nvidia drivers to latest version. Worked no problem before. Tried clean install of DynDOLOD still same issue, used render setting as suggested but took over 2 and half hours to complete. Edit: Downgraded driver to 537.58 worked perfectly Edited October 24, 2023 by OriginalNuttah Link to comment Share on other sites More sharing options...
sheson Posted October 25, 2023 Author Share Posted October 25, 2023 On 10/24/2023 at 9:48 AM, OriginalNuttah said: Also experiencing Open GL error after updating Nvidia drivers to latest version. Worked no problem before. Tried clean install of DynDOLOD still same issue, used render setting as suggested but took over 2 and half hours to complete. Edit: Downgraded driver to 537.58 worked perfectly Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log and debug log to upload when making posts. Edit TexGen_SSE.INI in notepad and add GLDebug=1 so the debug log contains more useful information when the OpenGL error occurs. Link to comment Share on other sites More sharing options...
SkyKatarsis Posted October 26, 2023 Share Posted October 26, 2023 I need help. https://drive.google.com/file/d/1wYzWy6qKKXfIvT0bBACXtVFMpy4b0o45/view?usp=sharing My logs. Previously, I could make lods, but now I can’t, the computer worked for 1.5 days, it’s unbearable, I still couldn’t generate a lod. Thank you very much in advance. I can't figure out what makes it work for so long without producing any results. Before this, I suffered for 2 days, I just froze for 12 hours after an hour of work and did not produce anything else. Link to comment Share on other sites More sharing options...
sheson Posted October 26, 2023 Author Share Posted October 26, 2023 1 hour ago, SkyKatarsis said: I need help. https://drive.google.com/file/d/1wYzWy6qKKXfIvT0bBACXtVFMpy4b0o45/view?usp=sharing My logs. Previously, I could make lods, but now I can’t, the computer worked for 1.5 days, it’s unbearable, I still couldn’t generate a lod. Thank you very much in advance. I can't figure out what makes it work for so long without producing any results. Before this, I suffered for 2 days, I just froze for 12 hours after an hour of work and did not produce anything else. Terminate or do not install the crapware from AMD as explained at https://dyndolod.info/FAQ#Long-running-time-or-output-several-GB-in-file-size Crapware installed with graphics drivers is known to prolong running times. Do a clean install of the latest recommended or official driver only. Do not install crapware shipping with the drivers or terminate it before running the tools. Consider to install .NET Runtime 7 as explained at https://dyndolod.info/Downloads#Additional-Requirements Link to comment Share on other sites More sharing options...
dionysist Posted October 26, 2023 Share Posted October 26, 2023 In the LODGen export files, is the GrassDensity value like iMinGrassSize where higher is less dense? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now