DynDOLOD 3.00 Alpha 182

[megablackk1d]

All these years I have been avoiding dyndolod because it looked way to hard to install, but I finally decide to try it. No matter what I do the process hangs and gets stuck close to 3 minutes in. This is the most frustrating mod I have ever had to deal with. Here is the log:

 

[vektor9999]

2 hours ago, sheson said:

The dynamic LOD already addresses LOD not unloading after fast travel, so the LOD not unloading bug fix is not needed anyways.

Make sure to check the INIs that are actually used in the game, in the MO2 profile folder, use MO2 menu Tools / Tool Plugins / INI Editor.
Also check SkyrimCustom.INI and every INI found in data folder with the game plugins.

If the INIs are not default, make a backup and test with default INIs.

OK i'm back again,

I double checked map settings in skyrim.ini and also in the custom.ini and the values are correct, so i don't use uLockedObjectMapLOD=32.

I deleted all logs before regen.

I regened lod with ultra, dynamic lod and seasons checked

I only generated lods for tamriel without grass cache so it was faster

DynDOLOD_SSE_log ==>  https://paste.ee/p/8iKr4

DynDOLOD_SSE_Debug_log (more than 300MB so i uploaded the file on my private cdn, fast download no worry) ==> https://nolvus-storage.b-cdn.net/DynDOLOD_SSE_Debug_log.txt

Compressed file here if you have issue ==> https://nolvus-storage.b-cdn.net/DynDOLOD_SSE_Debug_log.7z

 

Thanks a lot for your help

Edited August 4, 2023 by vektor9999

[sheson]

1 hour ago, vektor9999 said:

OK i'm back again,

I double checked map settings in skyrim.ini and also in the custom.ini and the values are correct, so i don't use uLockedObjectMapLOD=32.

I deleted all logs before regen.

I regened lod with ultra, dynamic lod and seasons checked

I only generated lods for tamriel without grass cache so it was faster

DynDOLOD_SSE_log ==>  https://paste.ee/p/8iKr4

DynDOLOD_SSE_Debug_log (more than 300MB so i uploaded the file on my private cdn, fast download no worry) ==> https://nolvus-storage.b-cdn.net/DynDOLOD_SSE_Debug_log.txt

Compressed file here if you have issue ==> https://nolvus-storage.b-cdn.net/DynDOLOD_SSE_Debug_log.7z

 

Thanks a lot for your help

Stuck object LOD is typically an engine issue.

Test with default INIs.

Test with older versions of Seasons of Skyirm, like 1.7.5.2 all the way back to 1.7.2 to see if there is a difference.

[z929669]

4 hours ago, megablackk1d said:

All these years I have been avoiding dyndolod because it looked way to hard to install, but I finally decide to try it. No matter what I do the process hangs and gets stuck close to 3 minutes in. This is the most frustrating mod I have ever had to deal with. Here is the log:

 

Please do not post your logs as text

Also, please do not double post identical topics.

I'm not sure why you are posting this in this particular forum, when the DynDOLOD application and Nexus mod pages all point clearly to the official support forum elswhere on this site. If you had read the basic info provided to everyone that obtains the application, you likely wouldn't have an issue or would have enough information to properly request support for your issue.

Moved to the DynDOLOD support forums for further input/investigation.

[vektor9999]

2 hours ago, sheson said:

Stuck object LOD is typically an engine issue.

Test with default INIs.

Test with older versions of Seasons of Skyirm, like 1.7.5.2 all the way back to 1.7.2 to see if there is a difference.

Reverted back to 1.7.5.2 and worked like a charm, as always you are the GOAT

Thanks a lot

[sheson]

6 hours ago, megablackk1d said:

All these years I have been avoiding dyndolod because it looked way to hard to install, but I finally decide to try it. No matter what I do the process hangs and gets stuck close to 3 minutes in. This is the most frustrating mod I have ever had to deal with. Here is the log:

Moved to the DynDOLOD 3 Alpha thread. See the first post which log and debug log to upload when making posts. https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs

I will list the things that worked for people in the past. Try one at time until it hopefully works:

Make sure UAC and antivirus are not interfering. Add exceptions for all executables, also for in ..\Edit Scripts\Texconvx64.exe for example.

Update the graphics driver to the latest version. Install the driver only without the crapware or terminate the crapware before using the tools.

Check the task manager for stuck Texconvx64.exe that TexGen might be waiting for. If you terminate all Texconvx64.exe TexGen should have a related error message and stop.

Add LockTexconv=1 under [TexGen] in ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.INI to see if that changes anything.

If not, test if adding RenderSingle=1 under [TexGen] in ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.INI lets it run through.

If not, test if adding RenderTexturesSingleThread=1 under [TexGen] in ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.IN changes anything.

If not, test if instructing Texconv to not use the GPU by adding TexconvAdapterIndex=-1 under [TexGen] in ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.IN changes anything.

If it still gets stuck, upload both the log and the debug log.

[AenSeidhe]

i cant see the new DynDOLOD DLL SE file you uploaded on nexus

[HeikimaO]

Hi, I recently updated to the newest version, and ran into a message I have never run into before 

[Window Title]
TexGen

[Main Instruction]
Access violation at address 000000000040EE50 in module 'TexGenx64.exe'.

[Content]
Read of address FFFFFFFFFFFFFFFF.

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

Any help you can provide would be much appreciated thank you

[MisterMorden]

Wow, so many changes!  Thank you very much for your tireless work on improving this invaluable, irreplaceable immersion increasing tool for us, Mighty Sheson!!!

[sheson]

28 minutes ago, AenSeidhe said:

i cant see the new DynDOLOD DLL SE file you uploaded on nexus

As usual, all the DynDOLOD DLL NG and Scripts Alpha archives for the experimental large references bugs workarounds are hidden on Nexus on purpose.

https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds

[sheson]

14 minutes ago, HeikimaO said:

Hi, I recently updated to the newest version, and ran into a message I have never run into before 

[Window Title]
TexGen

[Main Instruction]
Access violation at address 000000000040EE50 in module 'TexGenx64.exe'.

[Content]
Read of address FFFFFFFFFFFFFFFF.

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

Any help you can provide would be much appreciated thank you

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs, which log, debug log and bugreport.txt to upload.

[RuinedRun]

Downloaded newest version of Dynodolod 3 Alpha, Dynodolod Resources SE 3. Using DLL for 1.6.640. Got error that made TexGen exit mid-generation.

Already made Terrain with xLODGen using "xLODGen Resource - SSE Terrain Tamriel".

Bugreport.txt and logs in Google Drive folder: https://drive.google.com/drive/folders/1OwNEL4pnksRKMJaAZHrXJDDrWISn0xNU

[HiroMiro]

After updating Dyndolod 3 Alpha to the latest version, for some reason glowing windows no longer appear. I've used Dyndolod for years and have always loaded the medium settings and ticked the windows checkbox. Nothing in my load order has changed except updating Dyndolod. Is there a known issue or will I have to go use my backed up files to restore my previous Dyndolod output since you're not allowed to run older versions of Dyndolod (which I find a bit unfriendly)?

[AenSeidhe]

21 minutes ago, sheson said:

As usual, all the DynDOLOD DLL NG and Scripts Alpha archives for the experimental large references bugs workarounds are hidden on Nexus on purpose.

https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds

without DynDOLOD DLL NG and Scripts 3.00 [version Alpha-7] can i use DynDOLOD Alpha-129?

[sheson]

13 minutes ago, HiroMiro said:

After updating Dyndolod 3 Alpha to the latest version, for some reason glowing windows no longer appear. I've used Dyndolod for years and have always loaded the medium settings and ticked the windows checkbox. Nothing in my load order has changed except updating Dyndolod. Is there a known issue or will I have to go use my backed up files to restore my previous Dyndolod output since you're not allowed to run older versions of Dyndolod (which I find a bit unfriendly)?

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log and debug log to upload when making posts.

From the first post:
This is an ALPHA version to test things and iron out bugs. Certain things may be incomplete, not work as expected or change considerably between versions. 

If you do not want to participate in the alpha test, use DynDOLOD 2.98