Jump to content

DynDOLOD 3.00 Alpha 182


sheson

Recommended Posts

9 hours ago, Kansas72 said:

This is the dyndolod debug txt... 

https://ufile.io/faqd986y

This is the texgen debug txt...

https://ufile.io/3btqw74d

This is the dyndolod log txt...

https://ufile.io/bpxrshq0

Thanks. Please upload ..\skse\plugins\DynDOLOD_Data\DynDOLOD_Tamriel_Objects.txt from the DynDOLOD output.

Enable papyrus logging. coc Riverwood from the main menu and wait for DynDOLOD to initialize.
Make a screenshot of the DynDOLOD SkyUI MCM - Information page. Place the mouse pointer over Grid: 20480 so additional information is shown at the bottom.
Upload that papyrus log.

Link to comment
Share on other sites

4 hours ago, anassaa said:

Hello I am very new to modding so I would like some help if possible. I own Skyrim AE GOG version and when I try to run TexGen and dyndolod, they both try to find the .inis in Skyrim Special Edition instead of Skyrim Special Edition GOG. Is there anything I can do about this? Like direct them to the right folder? Or could I rename the foldier and remove "GOG"? Would it mess things up? Thanks in advance.

εικόνα_2023-01-30_052759959.png

Read the first post which log and debug log to upload when making posts.
As explained on the first, use the "Copy message to clipboard" and post the text instead of making screenshots.
Use the "Click on this link for additional explanations and help for this message" on the message to open https://dyndolod.info/Messages/INI-Files .

See https://dyndolod.info#Skyrim-Special-Edition-GOG-Skyrim-Anniversary-Edition-GOG or https://dyndolod.info/Mods/Skyrim-Special-Edition-GOG-Skyrim-Anniversary-Edition-GOG#Installation how to use command line arguments to set alternative paths for the INIs.

3 hours ago, anassaa said:

I want to add to that that I did try using the command lines on MM2 and it results to this. Sorry for my obliviousness and technological illiteracy if I am missing something obvious. 

εικόνα_2023-01-30_064146168.png

Copy and paste text instead of posting screenshots of text.

The command line argument is missing the double quotes around the path as shown at https://dyndolod.info/Mods/Skyrim-Special-Edition-GOG-Skyrim-Anniversary-Edition-GOG#Installation

Link to comment
Share on other sites

2 hours ago, Kansas72 said:

When I point mouse cursor over each one, they all say same thing as 20480.

20230130080640_1.jpg

20230130080716_1.jpg

PapyrusUtilDev.log 102.76 kB · 0 downloads Papyrus.0.log 609.84 kB · 0 downloads

The papyrus log seems to show that an existing game is being loaded.
As explained, start the game and use coc Riverwood from the main menu to simulate a test with a new game.

If it works then, make sure to follow https://dyndolod.info/Help/Clean-Save for the existing save.

If the problem also happens with a "new" game with coc Riverwood the from main menu, upload new papyrus log and also DynDOLOD_Worlds.txt and DynDOLOD_Tamriel.txt from the ..skse\plugins\DynDOLOD_Data\ DynDOLOD output. Also upload c:\Users\rlamb\Documents\My Games\Skyrim Special Edition\SKSE\DynDOLOD.log

Link to comment
Share on other sites

Okay.  I start a new game each time with alternate start.  I never start this process from a save.  But I will follow those instructions and resend those logs.  Maybe that's why it's not working.  I'm hoping anyways.  Thank you

Edited by Kansas72
Link to comment
Share on other sites

I deactivated dyndolod and large reference fix..  I went back in Inn and it said dyndolod was activated, not large reference fix.  Unchecked again and followed the steps.  When I did go outside, the water wheel was there.  So it's a clean save.  2 logs below because I wanted to see if the water wheel was there from the same save when I had dyndolod enabled.  Papyrus 1 is the first "clean" save.  The papyrus 0 is when I went outside to see if water wheel was there.

Papyrus.1.log Papyrus.0.log

Edited by Kansas72
Link to comment
Share on other sites

20 minutes ago, Kansas72 said:

I deactivated dyndolod and large reference fix..  I went back in Inn and it said dyndolod was activated, not large reference fix.  Unchecked again and followed the steps.  When I did go outside, the water wheel was there.  So it's a clean save.  2 logs below because I wanted to see if the water wheel was there from the same save when I had dyndolod enabled.  Papyrus 1 is the first "clean" save.  The papyrus 0 is when I went outside to see if water wheel was there.

Papyrus.1.log 3.73 MB · 0 downloads Papyrus.0.log 125 kB · 0 downloads

Do what I actually asked you to do.

Link to comment
Share on other sites

I re-enabled dyndolod output.  Ran game.  I included 2 pics of what happened.  I got dyndolod to reload/enable when I went to Fort Dawnguard.  But the pics are when I went to White Run.  Latest papyrus log.  https://ufile.io/7id4xwfa

The dyndolod worlds and tamriel have yesterdays date on them.  Tamriel  https://ufile.io/zsvz6sf1  Dyddolod log  https://ufile.io/obwtsbjh

Maybe the settings and/or asus 6800 gpu just cant handle a mod order this large with high settings.  It's just weird it's the only thing I've seen not show up.  Waterfalls and streams are perfect.  I have a couple windmill mods and they also work.  Also using skyrim re-engaged enb highest settings.  Everything looks amazing, just the water wheels are missing.  The splashes are even there.

20230130102701_1.jpg

20230130102710_1.jpg

DynDOLOD_Worlds.txt

Link to comment
Share on other sites

52 minutes ago, Kansas72 said:

I re-enabled dyndolod output.  Ran game.  I included 2 pics of what happened.  I got dyndolod to reload/enable when I went to Fort Dawnguard.  But the pics are when I went to White Run.  Latest papyrus log.  https://ufile.io/7id4xwfa

The dyndolod worlds and tamriel have yesterdays date on them.  Tamriel  https://ufile.io/zsvz6sf1  Dyddolod log  https://ufile.io/obwtsbjh

Maybe the settings and/or asus 6800 gpu just cant handle a mod order this large with high settings.  It's just weird it's the only thing I've seen not show up.  Waterfalls and streams are perfect.  I have a couple windmill mods and they also work.  Also using skyrim re-engaged enb highest settings.  Everything looks amazing, just the water wheels are missing.  The splashes are even there.

20230130102701_1.jpg

20230130102710_1.jpg

DynDOLOD_Worlds.txt 1.38 kB · 0 downloads

What is preventing you from starting the game, coc riverwood from main menu, wait for DynDOLOD to initialize and in case the waterwheel did not show to upload that papayrus log and SKSE/DynDOLOD.log?

Link to comment
Share on other sites

Added last 2 papyrus.  Papyrus 0 is the latest one.  That's when I went outside in riverwood from previous save.  Clicked on both boxes and waited for dyndolod enabled popup.  Then coc riverwood.  Still no water wheel.  It's like the one time where you had me send the pics of dyndolod menu and cursor.  Said the same thing.  It has to be a mod inferring with it.  I have automated static fix which makes the water wheel turn correctly I guess.  I forget the reasoning for it at this time.  But I had it uninstalled one time and water wheel still wasn't there.  Although I didn't do clean save either.  Just redid texgen and dyndolod and then started up new game.  In perfect world, I would disable a bunch, rerun tex and dyn and see if its there. Then keep enabling more until I find culprit.

Papyrus.0.log Papyrus.1.log DynDOLOD.log

Edited by Kansas72
Link to comment
Share on other sites

41 minutes ago, Kansas72 said:

Added last 2 papyrus.  Papyrus 0 is the latest one.  That's when I went outside in riverwood from previous save.  Clicked on both boxes and waited for dyndolod enabled popup.  Then coc riverwood.  Still no water wheel.  It's like the one time where you had me send the pics of dyndolod menu and cursor.  Said the same thing.  It has to be a mod inferring with it.  I have automated static fix which makes the water wheel turn correctly I guess.  I forget the reasoning for it at this time.  But I had it uninstalled one time and water wheel still wasn't there.  Although I didn't do clean save either.  Just redid texgen and dyndolod and then started up new game.  In perfect world, I would disable a bunch, rerun tex and dyn and see if its there. Then keep enabling more until I find culprit.

Papyrus.0.log 475 kB · 0 downloads Papyrus.1.log 201.32 kB · 0 downloads DynDOLOD.log

Start the game. Do not load any save game. From the main menu, open console with ~, type coc riverwood. Wait for DynDOLOD to initialize. Quit. Upload that Papyrus.log and DynDOLOD.log

Link to comment
Share on other sites

LODGenx64Win.exe failed to generate object LOD for all worldspaces, including Tamriel. The outputs says "LodGenx64Win.exe retrieved E0434352" which this explains as "Install/Update/Repair .Net Framework 4.8 or newer. Install/Update/Repair .NET Runtime 6 or newer." But the installer say that both are up-to-date and can't find anything to repair. Checking the command prompt window and logs doesn't show any error messages, they all look like this: 

Spoiler

============================================================
Skyrim/Fallout Object/Terrain LOD Generator 3.0.10.0
Created by Ehamloptiran and Zilav
Updated by Sheson

Log started at 20:39:49
.NET Version: 6.0.4
Game Mode: SSE
Worldspace: Tamriel 
Fix Tangents: False, False, False, False
Generate Tangents: True, True, True, True
Generate Vertex Colors: True, True, True, True
Merge Vertex Colors: True, True, True, True
Merge Meshes: True
Grouping: False
Remove Faces under Terrain: True
Remove Faces under Water: True
Remove Faces Z-Shift: 10
Use HD Flag: True
Ignore Materials: False
Alpha DoubleSided: False
Default Alpha Threshold: 128
Use Source Alpha Threshold: False
Use Backlight Power: False
Use Decal Flag: False
Specific level: No
Specific quad: No
Max Level: 32
Output: C:\Users\FiercePC\AppData\Local\ModOrganizer\SkyrimSE\DynDOLOD\DynDOLOD_Output\Meshes\Terrain\Tamriel\Objects\
Using UV Atlas: C:\Users\FiercePC\AppData\Local\ModOrganizer\SkyrimSE\DynDOLOD\Edit Scripts\Export\LODGen_SSE_ObjectAtlasMap_Tamriel.txt
Using Flat Textures: C:\Users\FiercePC\AppData\Local\ModOrganizer\SkyrimSE\DynDOLOD\Edit Scripts\Export\LODGen_SSE_FlatTextures.txt
Using Alt Textures: C:\Users\FiercePC\AppData\Local\ModOrganizer\SkyrimSE\DynDOLOD\Edit Scripts\Export\LODGen_SSE_AltTextures_Tamriel.txt
Generating object LOD meshes for worldspace Tamriel
Reading C:\Users\FiercePC\AppData\Local\ModOrganizer\SkyrimSE\DynDOLOD\Edit Scripts\Export\LODGen_SSE_Terrain_Tamriel.bin
Threads: 1
Concs: 2
 

 

LODGen_SSE_JaphetsFollyWorld_log.txt LODGen_SSE_MarkarthWorld_log.txt LODGen_SSE_PalePass_log.txt LODGen_SSE_SkuldafnWorld_log.txt LODGen_SSE_Sovngarde_log.txt LODGen_SSE_Tamriel_log.txt TexGen_SSE_log.txt LODGen_SSE_0WHMiniBearQuestWorld_log.txt LODGen_SSE_Blackreach_log.txt LODGen_SSE_ccBGSSSE067DeadlandsWorld_log.txt LODGen_SSE_ccKRTSSE001QNWorld_log.txt LODGen_SSE_DeepwoodRedoubtWorld_log.txt LODGen_SSE_DLC01FalmerValley_log.txt LODGen_SSE_DLC01SoulCairn_log.txt LODGen_SSE_DLC1HunterHQWorld_log.txt LODGen_SSE_DLC2ApocryphaWorld_log.txt LODGen_SSE_DLC2SolstheimWorld_log.txt

Link to comment
Share on other sites

11 hours ago, British_Werewolf said:

LODGenx64Win.exe failed to generate object LOD for all worldspaces, including Tamriel. The outputs says "LodGenx64Win.exe retrieved E0434352" which this explains as "Install/Update/Repair .Net Framework 4.8 or newer. Install/Update/Repair .NET Runtime 6 or newer." But the installer say that both are up-to-date and can't find anything to repair. Checking the command prompt window and logs doesn't show any error messages, they all look like this: 

  Reveal hidden contents

 

Moved to the DynDOLOD 3 Alpha thread. Read the first post which DynDOLOD log and debug log to also upload when making posts.

https://www.microsoft.com/en-us/download/details.aspx?id=30135
https://dyndolod.info/Help/LODGen. There are two more suggestions for E0434352. Check/post the Windows event log entries.

https://dyndolod.info/Installation-Instructions
Use 7-Zip to unpack the DynDOLOD Standalone archive into a new and empty 'DynDOLOD' directory that is outside of special OS folders like 'Programs Files' or 'Program Files (x86)', User, Documents, Desktop, Download and also not in SteamApps, game, Data or any mod manager folders. For example C:\Modding\DynDOLOD\.

https://dyndolod.info/Generation-Instructions
Select a dedicated output path. The dedicated output path should be outside of special OS folders like 'Programs Files' or 'Program Files (x86)', User, Documents, Desktop, Download and also not in SteamApps, game or any mod manager folders.

Link to comment
Share on other sites

I disabled majority of mods and loaded mainly Jk's mods with patches.  Bug fixes and utilities like that.  Main mods like interesting, cutting room floor.  Also Enhanced Solitude and Capital Windhelm and White Run, Solitude docks updated.  ENB as well.  Same issue.  New game, new dyndolod and texgen.  I loaded up vanilla game first before adding any mods and water wheel was there.  Add mods and it wasn't.  I was hoping a mod was causing issue, but not sure which of the 223 it is.   Uploaded papyrus log and dyndolod log.  https://ufile.io/tlm89uv5 

I do appreciate your help, but if we can't find fix, I will just go back to using those 2 dll files instead of NG (with large reference fix).  I will keep updating resources and dyndolod program updated as long as it works, but not NG.

Papyrus.0.log

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.