DynDOLOD 3.00 Alpha 182

[dregoc]

1 hour ago, sheson said:

I moved your post to the the DynDOLOD 3 Alpha thread.

If you look at a few of the posts above, then you will see that Alpha-70 should fix that problem.

In case it doesn't, upload the log and debug log as explained in the first post.

Yep, that fixed it, thanks a lot.

[DarkladyLexy]

It been nearly 2 hours and DynDOLOD hasn't even finished I know DynDOLOD takes awhile but it usually done in about 45 mins for me not 2 hours.

[adancau]

Having an issue with TexGen that's just started now with Alpha 70 (Alpha 69 and lower all work well):

[Main Instruction]
Texconv error 80070002.

[Content]
"C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_295_2.txt"

It's always happening on a different billboard though, but always very late in the process. This is another example, on a successive run.

[Content]
"C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_300_1.txt"

Log excerpt (as I said, it's always a different .nif):

[01:43]     Creating billboard D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\skyrim.esm\treeaspen06_0007614a with Meshes\landscape\trees\treeaspen06.nif Skyrim.esm TreeAspen06 [TREE:0007614A]
[01:44]  FAILED (80070002: The system cannot find the file specified.)
[01:44] Error: Texconv error 80070002 "C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_300_1.txt"

I have tried disabling Windows Defender, adding more rules, but nothing fixes it. Reverting to an older version of DynDOLOD, as I mentioned above, works without fail (tried 69, 68 and 66).

[sheson]

1 hour ago, PRieST said:

'Memory comsumption' was normal as with every other alpha version before (between 7 to 8 GB). Maybe I did messed up with just copying the new files.

I'll check the ini setting you mentioned if my second run also doesn't finish correctly. I never changed this value, was using the default setting all the time.

 

51 minutes ago, DarkladyLexy said:

It been nearly 2 hours and DynDOLOD hasn't even finished I know DynDOLOD takes awhile but it usually done in about 45 mins for me not 2 hours.

Yes, I think something "broke" Occlusion generation reading object LOD meshes so it takes forever. Will be fixed in Alpha-71 ASAP.

[DarkladyLexy]

9 minutes ago, sheson said:

 

Yes, I think something "broke" Occlusion generation reading object LOD meshes so it takes forever. Will be fixed in Alpha-72 ASAP.

I have a log it that will help?

[sheson]

21 minutes ago, adancau said:

Having an issue with TexGen that's just started now with Alpha 70 (Alpha 69 and lower all work well):

[Main Instruction]
Texconv error 80070002.

[Content]
"C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_295_2.txt"

It's always happening on a different billboard though, but always very late in the process. This is another example, on a successive run.

[Content]
"C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_300_1.txt"

Log excerpt (as I said, it's always a different .nif):

[01:43]     Creating billboard D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\skyrim.esm\treeaspen06_0007614a with Meshes\landscape\trees\treeaspen06.nif Skyrim.esm TreeAspen06 [TREE:0007614A]
[01:44]  FAILED (80070002: The system cannot find the file specified.)
[01:44] Error: Texconv error 80070002 "C:\Users\XXXXX\AppData\Local\ModOrganizer\Skyrim SE\tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -aw 256 -m 1 -f BC7_UNORM -bc q -o "D:\Mod Repository\Skyrim SE & VR\texgen_output\textures\terrain\lodgen\cathedral landscapes.esp" -flist "C:\Users\XXXXX\AppData\Local\Temp\TexGen_SSE\Texconv_300_1.txt"

I have tried disabling Windows Defender, adding more rules, but nothing fixes it. Reverting to an older version of DynDOLOD, as I mentioned above, works without fail (tried 69, 68 and 66).

There is really nothing a program (in this case both TexConv can do about the OS or antivir  denying write access. I mean if a program could circumvent it it would be malicious.

Texconv.exe didn't change since December. The way TexGen uses to build convert textures did not change since Alpha-66.

If the same setup and paths work with Alpha-66 to Alpha-69 I can not really suggest anything else but to hope the next version has different byte code again so it won't trigger anything.

12 minutes ago, DarkladyLexy said:

I have a log it that will help?

No need. Thanks.

[adancau]

14 minutes ago, sheson said:

If the same setup and paths work with Alpha-66 to Alpha-69 I can not really suggest anything else but to hope the next version has different byte code again so it won't trigger anything.

Will post an update re: behavior on the next Alpha. Thanks.

Edited February 13, 2022 by adancau

[sheson]

1 hour ago, PRieST said:

'Memory comsumption' was normal as with every other alpha version before (between 7 to 8 GB). Maybe I did messed up with just copying the new files.

I'll check the ini setting you mentioned if my second run also doesn't finish correctly. I never changed this value, was using the default setting all the time.

 

55 minutes ago, DarkladyLexy said:

It been nearly 2 hours and DynDOLOD hasn't even finished I know DynDOLOD takes awhile but it usually done in about 45 mins for me not 2 hours.

Fixed in Alpha-71

[PRieST]

59 minutes ago, sheson said:

Fixed in Alpha-71

Thank you, just started a new generation cycle.

Edit: Everything is working now.

Edited February 13, 2022 by PRieST

[adancau]

Tried TexGen again with Alpha 71. The only difference is that it now fails much faster than before (within the first 30s). Same error, different billboard each time.

EDIT: Replaced TexGenx64.exe from A71 with the one from A69, and the issue goes away.

Edited February 13, 2022 by adancau

[sheson]

2 hours ago, adancau said:

Tried TexGen again with Alpha 71. The only difference is that it now fails much faster than before (within the first 30s). Same error, different billboard each time.

EDIT: Replaced TexGenx64.exe from A71 with the one from A69, and the issue goes away.

Out of curiosity try this:

Check what happens if you unpack DynDOLOD into C:\DynDOLOD\ and start it from there.

Generate to the default output folder inside the c:\DynDOLOD\ folder

Start TexGen with -T:"C:\DynDOLOD\temp\" command line argument to set a custom temp path.

[MrTanku]

9 hours ago, sheson said:

Do you have any 3rd party crapware from AMD running that install with the driver installation?

See if anything behaves differently with newer Alpha versions.

TexGen_SSE_realtime_log.txtsame behavior, worst case scenario I'd do a clean install....which I would rather not do atm.

[TheAlphaWolf449]

3 hours ago, adancau said:

Tried TexGen again with Alpha 71. The only difference is that it now fails much faster than before (within the first 30s). Same error, different billboard each time.

EDIT: Replaced TexGenx64.exe from A71 with the one from A69, and the issue goes away.

Is there somewhere I can obtain the archived versions. Tex Gen has been giving me the same headache. TexGen crashes after roughly 30 secondes with a different billboard each time. I've also verified that the billboards are installed, and they are. I was not having this issue on Alpha 69. However, I no longer have the download for Alpha 69.

[sheson]

28 minutes ago, TheAlphaWolf449 said:

Is there somewhere I can obtain the archived versions. Tex Gen has been giving me the same headache. TexGen crashes after roughly 30 secondes with a different billboard each time. I've also verified that the billboards are installed, and they are. I was not having this issue on Alpha 69. However, I no longer have the download for Alpha 69.

Upload the log, debug log and bugreport as explained on the first post.

[sheson]

1 hour ago, MrTanku said:

TexGen_SSE_realtime_log.txtsame behavior, worst case scenario I'd do a clean install....which I would rather not do atm.

If you mean the game or the OS, don't do that. The game install should have no direct affect on this (though it is possible that different input or the different output files size, content or whatever could have an affect)

You could try running in Windows safe mode, see if that makes a difference.

Check if there is anything different with this test version
If not, edit ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.INI and add RenderThreads=1 right under [TexGen] at the top to test if that makes a difference.
If not, set OldMethod=1 in the INI to see if that makes a difference.