DynDOLOD 3.00 Alpha 180

[MajorStarewell]

10 hours ago, sheson said:

What is a hard silent CTD?
Does it show the options window? The log looks like what happens when none of the 3 main options are checked and start is clicked.
Make sure there are no files from older DynDOLOD Standalone installations being used.

Test what happens if the tool is started directly from Windows Explorer.

Do not install the game into special Windows folder like Program Files x86 to avoid issue with UAC, antivir etc.

Sorry, meant for there to be a slash between hard and silent, it just means there's no error message when it crashes. I just updated to 113 (the file uploaded to nexus says alpha 133 I assume this is a typo) and I was still getting the same crash when launching from command line using -sse, but launching straight from file explorer works fine, no crashes.

[sheson]

1 hour ago, MajorStarewell said:

Sorry, meant for there to be a slash between hard and silent, it just means there's no error message when it crashes. I just updated to 113 (the file uploaded to nexus says alpha 133 I assume this is a typo) and I was still getting the same crash when launching from command line using -sse, but launching straight from file explorer works fine, no crashes.

How is it crashing? Do you mean it simply does nothing after clicking the start button and goes straight to prompting the Exit message?

Upload the log and debug of new the version, both sets, starting with MO2 and starting directly. If there happens to be a bugreport.txt, upload that, too.

[sheson]

2 hours ago, Gamma_Metroid said:

Hi Sheson,

I am getting some black textures on my atlas with the new version.

Logs and screenshot: https://ufile.io/f/jc9j3

Affected textures include:

• textures\morrowind\architecture\vivec\exteriors\env2d_chim_vivecwallplaster.dds

• textures\morrowind\architecture\vivec\exteriors\env2d_chim_vivecmarble.dds

If there are any more files that would be helpful please let me know.

Upload one or more of the affected full source textures (.dds and _n.dds).
Upload DynDOLOD_WrldMorrowind00.dds and DynDOLOD_WrldMorrowind01.dds (and their _n.dds)
Upload C:\DynDOLOD\Edit Scripts\Export\LODGen_SSE_ObjectAtlasMap_WrldMorrowind.txt

[Admiral30]

I have a problem with DynDOLOD refusing to start.

I'm using up to date DynDOLOD with DynDOLOD Resources enabled (both during generation and for gameplay), DynDOLOD DLL Scripts 2.82.4 and DynDOLOD DLL 2.45 for Skyrim SE 1.5.97.

I've did the same thing that I always do and it always works. Run texgen, throw output into MO2, enable it, run dyndolod, throw output into MO2, enable it, order plugins, and done, it works. But not this time. LOD is screwed up and DynDOLOD toggle is greyed out in MCM. Unfortunately I have no clue what it can be.

[sheson]

10 minutes ago, Admiral30 said:

I have a problem with DynDOLOD refusing to start.

I'm using up to date DynDOLOD with DynDOLOD Resources enabled (both during generation and for gameplay), DynDOLOD DLL Scripts 2.82.4 and DynDOLOD DLL 2.45 for Skyrim SE 1.5.97.

I've did the same thing that I always do and it always works. Run texgen, throw output into MO2, enable it, run dyndolod, throw output into MO2, enable it, order plugins, and done, it works. But not this time. LOD is screwed up and DynDOLOD toggle is greyed out in MCM. Unfortunately I have no clue what it can be.

Read the first post which log and debug log to upload when making posts.

Pay attention to error messages in the game. Check/post screenshot of the DynDOLOD SkyUI MCM Information page.

[Gamma_Metroid]

39 minutes ago, sheson said:

Upload one or more of the affected full source textures (.dds and _n.dds).
Upload DynDOLOD_WrldMorrowind00.dds and DynDOLOD_WrldMorrowind01.dds (and their _n.dds)
Upload C:\DynDOLOD\Edit Scripts\Export\LODGen_SSE_ObjectAtlasMap_WrldMorrowind.txt

https://ufile.io/f/11w1y

[Admiral30]

9 minutes ago, sheson said:

Read the first post which log and debug log to upload when making posts.

Pay attention to error messages in the game. Check/post screenshot of the DynDOLOD SkyUI MCM Information page.

Oh dear, of course I didn't look at the first page. Here are the logs and some screenshots:
https://ufile.io/f/gp6k5

[sheson]

56 minutes ago, Gamma_Metroid said:

https://ufile.io/f/11w1y

Thanks. Unfortunately I am not able to reproduce this yet. Is this a repeatable issue? Does it also happen when clicking "Rebuild Atlas" in expert mode? https://dyndolod.info/Help/Expert-Mode

[sheson]

43 minutes ago, Admiral30 said:

Oh dear, of course I didn't look at the first page. Here are the logs and some screenshots:
https://ufile.io/f/gp6k5

Thanks, that helps.

Fixed in Alpha 114. Generate again from scratch.

[Admiral30]

4 minutes ago, sheson said:

Thanks, that helps.

Fixed in Alpha 114. Generate again from scratch.

Even occlusion? That thing takes ages, I can do it, but I would want to avoid it.

[sheson]

5 minutes ago, Admiral30 said:

Even occlusion? That thing takes ages, I can do it, but I would want to avoid it.

No need to generate Occlusion.esp again if the load order didn't change.

[Gamma_Metroid]

15 minutes ago, sheson said:

Thanks. Unfortunately I am not able to reproduce this yet. Is this a repeatable issue? Does it also happen when click "Rebuild Atlas" in expert mode? https://dyndolod.info/Help/Expert-Mode

The black textures are gone after using the "Rebuild Atlas" function. I didn't try regenerating after the initial problem so maybe it was a one-off glitch. I will let you know if it happens again.

[LoooneyTunes]

Hey Sheson,

I encountered an error while generating the tamriel atlas in Dyndolod.

Here are my logs and bug report please let me know if I missed anything.

https://ufile.io/u7k82woz

Best,

LoooneyTunes

[sheson]

1 hour ago, LoooneyTunes said:

Hey Sheson,

I encountered an error while generating the tamriel atlas in Dyndolod.

Here are my logs and bug report please let me know if I missed anything.

https://ufile.io/u7k82woz

Best,

LoooneyTunes

Is this error repeatable?

[CBSkyrimModding]

Hi, I'm almost finished working through the STEP Guide and am at the point where it's time to use TexGen. When running the program, I'm consistently hitting Texconv error 800705AA, but the help link (https://dyndolod.info/Help/Texconv) doesn't include that particular error. Not sure how to solve the problem, so I'm hoping you guys can help. Much thanks in advance. I've included a text file with the error message, but I'll also paste it below:

[Window Title]
TexGen

[Main Instruction]
Texconv error 800705AA.

[Content]
textures\architecture\whiterun\WRTreeFloweringBranch01_n.dds

"G:\Modding\Tools\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -aw 256 -f R8G8B8A8_UNORM -o "C:\Users\Dunamis1\AppData\Local\Temp\TexGen_SSE" "C:\Users\Dunamis1\AppData\Local\Temp\TexGen_SSE\AB5D18A56F804270A2EC4302E9F1C48D.dds"

Click on this link for additional explanations and help for this message

[Exit TexGen]

TexGenError800705AA.txt