Jump to content
  • 0
Sign in to follow this  
RandolphCarter

Two Separate Questions

Question

Hi everyone,

I'd first like to start off by saying that, along with Fear and Loathing in New Vegas, I'm generally new to modding (a polite way of saying I've little idea of what I'm doing) but for the former I managed to scrape by from following the guide basically to the T. I'll put out on the table that I'm currently running Windows 10 Home 1703. I've been having a little more difficulty with Clear and Present Danger. I figure that by constantly checking with the game every time 2-3 mods are installed I can troubleshoot problems better. Currently I'm facing two errors and I'm not entirely sure what I'm doing wrong.

 

1) Dynamic Crosshairs. Despite following the STEP Guide's instructions to get the version that has Darn UI compatibility whenever I try to sort with LOOT I get an error stating that it is not compatible with DarNifiedUIF3.esp. I've done nothing other than install it through MO so I'm not sure what could be causing this problem.

 

2) Fallout 3: Wanderer's Edition v. 6.03 (via the hotfix). Despite installing FOSE to the Fallout 3 GOTY Steam directory if I try to launch the game through the 4GB-patched Fallout 3 through MO it gives me an error stating that FOSE was not detected; it does not do the same when I try it through the FOSE Launcher. It certainly can't be outdated either as I have version 1.3 b2.

Any kind of help would be appreciated, thanks.

Edited by RandolphCarter

Share this post


Link to post
Share on other sites

5 answers to this question

Recommended Posts

  • 0

Okay, the error message is not an error in this case. LOOT provides that message to alert the user about an incompatibility with the original plugin but since we are using the hotfix, and it can't tell the difference due to the same name, you need only ignore it.

Share this post


Link to post
Share on other sites
  • 0

1) LOOT is giving the error? What exactly is it saying? Dynamic Crosshair should come after DarNUI.

 

2) You need to call the game via the FOSE loader in MO's executables list. Calling the game any other way will not load FOSE and therefore you will see those errors.

Share this post


Link to post
Share on other sites
  • 0

1) LOOT is giving the error? What exactly is it saying? Dynamic Crosshair should come after DarNUI.

 

2) You need to call the game via the FOSE loader in MO's executables list. Calling the game any other way will not load FOSE and therefore you will see those errors.

That would explain things as far as FOSE is concerned. I had a suspicion that that was the case, but I figured I would ask regardless.

 

As for one...

 

"This plugin is incompatible with "DarNifiedUIF3.esp", but both are present."

 

For the record it (Dynamic Crosshair, at spot 1F?) is loaded after Darn UI (at spot #10)

Edited by RandolphCarter

Share this post


Link to post
Share on other sites
  • 0

You did install (left pane of MO) DarNified UI (needed so the FWE FOMOD works correctly) before FWE,  and then installed DarnUI Support for FWE later in the installation as per the guide, right? The version of DarNifiedUIF3.esp from DarnUI Support for FWE will be the one that is used in the game (it will be in the right pane of MO).

Share this post


Link to post
Share on other sites
  • 0

You did install (left pane of MO) DarNified UI (needed so the FWE FOMOD works correctly) before FWE,  and then installed DarnUI Support for FWE later in the installation as per the guide, right? The version of DarNifiedUIF3.esp from DarnUI Support for FWE will be the one that is used in the game (it will be in the right pane of MO).

Yes, as you can see here I even have Darn UI Support for FWE as a separate mod as per the instructions.

 

MO_F3.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By sheson
      This is a beta of [FNV|FO3|FO4|FO4VR|TES5|SSE|TES5VR|ENDERAL|ENDERALSE]LODGen/Edit with terrain LOD meshes and textures generation.
      This is for experienced mod authors and users that know how to use xEdit, xLODGen or DynDOLOD already.
      Installation and Setup
      Download
      xLODGen beta 85 - based on 4.1.4
      Unzip into a dedicated folder outside of any game and Steam folders or special Windows folders like Program Files.
      (Pro users can merge with existing xEdit installation. Make sure to overwrite older LODGen.exe/LODGenx64.exe TexConv.exe/TexConvx64.exe in Edit Scripts. All other files with the same filenames are the same as the latest version of xEdit.)
      Rename xLODGen.exe to [game mode]LODGen.exe (TES5LODGen.exe for example) or start with command line parameter -fnv, -fo3, -fo4, -fo4vr, -tes5, tes5vr, -sse, -enderal, -enderalse
      Use -o:"c:\OutputPath\" command line parameter to change where files are generated to, default is the game folder.
      Do not generate into any game or any mod manager folders.
      Requirements
      Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019 - Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which xLODGen.exe (x86) or xLODGenx64.exe (x64) is used.
      RTFM and Share Results
      See the included Skyrim-Occlusion-Readme.txt for a brief explanation of the Skyrim TVDT Occlusion data generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions or give feedback in the dedicated Skyrim TVDT - Occlusion Data thread.
      See the included Terrain-LOD-Readme.txt for a brief explanation of the settings for terrain LOD generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions about terrain LOD in this thread for a more in-depth explanation if required and share feedback (with screenshots) about results or problems.
      These tools generate LOD meshes and textures "exactly" like CK, but not like the meshes and textures which are shipping with the games (they are often manually edited).
      However, these tools provide more options and higher resolutions (use the x64 version if there are memory errors because you believe you require 4k or higher) and can be updated to add more useful features and options.
      I did some testing in the different games, but finding the best combinations of options and settings requires lots of testing and are a matter of personal opinion and which game is used, the load order, mods, even different worldspaces probably.
      That means, I am only able to give generic guidelines and hints to send you off to find and test for yourself and share your results. My main interested is that generations works correctly and without problems for now.
      Check out the thread xLODGen Terrain Settings Compare. Also refer to any modding guide which has a list of relevant mods close to your load order.
      The object and tree LOD generation is the same as the current versions of xEdit / xLODGen. Refer to their respective descriptions and explanations.
      Obviously, users of Skryim/Enderal/Skyrim SE/Skyrim VR/EnderalSE continue to use the easier and more comprehensive DynDOLOD for drastically improved object and tree LOD generation and only use xLODGen for terrain LOD (and maybe Occlusion) generation.
      First Time
      Here are suggestion to start without going crazy and that should be quick enough to generate:
      Set quality of meshes for LOD4 to 5 and then +5 for each next level. Or just set levels 8/16/32 to 10.
      Check protect cell borders (yes it fixes the ugly terrain drops at outer cell borders that still exist in Fallout 4).
      Use the max vertices setting only if you want to hard limit max file size.
      In Skyrim Special Edition or Skyrim VR, if you notice terrain briefly flickering when new areas are loading in, set [Display] bEnableLandFade=0 in Skyrim.INI
      Set Optimize Unseen to off for LOD4 for first generation. Start experimenting with a value of 550 with a quality setting of 10 or lower for LOD32 (used for map) and compare coastlines and file size to other settings.
      To quickly generate terrain LOD meshes just for the map, check only terrain LOD Meshes, check the Specific Chunk checkbox and set drop down to 32. Leave SW fields empty for complete map or set SW cell coordinates to same values as a *.btr filename to test a specific area with lots of water, river etc.
      Set texture sizes to 512 for a start. Larger sizes and large world spaces will take a considerable time (like 15 to 30 minutes or more easily). Each higher resolution means quadruple the work.
      Use DXT1 for diffuse and 565 (DXT1 if on Windows 7) for normal maps. If generating for Skyrim Special Edition use BC7. Uncheck mipmaps, raise steepness and Bake normal maps.
      For now, leave the Brightness, Contrast and Gamma at 0 and 1.0 respectively. It seems that only Skyrim CK and Skyrim SE CK are manipulating the intensity of the textures to adjust for the noise.dds and the god awful "improved" snow shader of Skyrim SE (just turn that thing off, really). If textures seem too dark in the game, brighten the noise.dds instead or vice versa. That way you can get perfectly matching LOD textures that look just like the textures in the loaded cells. For Skyrim a good average color of the noise texture seems to be around #C0. See below for a couple noise texture downloads.
      If you want to test larger texture sizes, use the chunk option to limit the number of textures that need to be generated. For example, check [x] Specific chunk, leave the drop down empty and set WS to the lower left cell coordinate of an 32x32 area, like 0, 0. It will then generate all textures up to 31,31. Not all worldspaces have their origin at 0,0 so you will have to check already generated meshes/texture filenames for their lower left coordinates.
      Questions and Feedback
      Obliviously anything related to terrain LOD should be posted in this thread.
      Posts related to Occlusion should be made here.
      Recommended Optionals
      TES5-Terrain-Tamriel.esm (Mega), SSE-Terrain-Tamriel.esm (Mega)
      TES5-Terrain-Tamriel-Extend.esm (Mega), SSE-Terrain-Tamriel-Extend.esm (Mega) - These extend the sea of ghost further to the north (see screenshots)
      SSE-Terrain-Tamriel-Full-Extend.esm (Mega) - Entire map from -96,-96 to 95,96 with northern ocean extension. Useful for mod authors.
      Put in game data folder obviously. Adds back terrain for Skyrim (Tamriel worldspace) at the outer edges so there is no missing terrain meshes/textures when generating terrain LOD for Skyrim.
      Load as early with lowest priority as possible, so that any other plugins overwriting or adding land records or cells with the same coordinates take precedence.
      Only required to be loaded when generating terrain LOD. No harm done when loaded in-game but typically the player can not get close to these areas. There are no effects outside the far away added cells.
      Noise
      Single color flat noise, Adjusted vanilla noise, HD Terrain Noise Texture SE
      Examples for Skyrim. Install to game folder like any other texture mod. The noise texture is applied in-game on top of terrain LOD textures, so no effect for LOD generation.
      Only the red channel is used in case the textures is not a grey channel format. MipMaps are ignored. The textures is tiled 3x3 per LOD quad, e.g. for LOD level 4, the noise texture is repeated 3 times to cover 4 cells, for LOD level 8, the noise texture is repeated 3 times to cover 8 cells and so on.
      Test-Terrain-Tamriel.7z
      For testing terrain LOD distances. Plain color terrain LOD textures for Tamriel with coordinates for every LOD quad. Green for LOD 4, yellow for LOD8, blue for LOD 16 and red for LOD 32.
    • By se7enex
      Lucas Simms himself is missing his arms. I can see his gloves but his actual arms are invisible. I can't even begin to imagine what the fluff could be causing that. I did have issues with .32 and Mausers having big red exclamation marks but that's because it REQUIRES (listed in mod guide as optional) the individual weapon remakes. 

      Springvale Sewers, a AWOP location crashes consistently when I try to enter it. 

       
    • By Dennai
      Is there a way to make GaryBash work with MO in Fallout 3? I tried to use it as executable, but MO wouldn't recognized the Wrye launcher as such. It surprised me, because MO had no problem recognizing the Wrye Bash launcher for Oblivion, but I don't have the same luck with Wrye Flash. When I browse the Moppy folder to try to find the Binary, Wrye Bash Debug is the only application the MO can see.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.