SRLE: Legacy of The Dragonborn Reqtified

[Nozzer66]

BTW, any plans of updating the guide to replace WATER?

[paul666root]

No. Posted a link to the one we had

[dunc001]

Yeah ok I've had that set to 128 since I installed crash fixes. the memory blocks are at around 80% full when out in the wilds. I'll try increasing it to 256.

 

Also I checked all my drivers are up to date. My memory is also running in dual channels.

 

Don't do that!  256 is way too high for the Crash Fixes custom memory block size.  If console is showing blocks at 80% you'd actually get away with lowering this value.  Adjust it in 5's until you see the highest block sitting at around 85-90%, otherwise you're wasting memory allocation that could be being used for something else.  It doesn't have to be 64/128/256/512 btw, this value can be set to any value it needs to be.  Mine is currently at 136.

 

Your available texture memory will only display in the ENB startup info in the top left if you have AutoDetectVideoMemorySizeMB set to true in enblocal - try that and see if it helps.

Edited November 30, 2016 by dunc001

[Nozzer66]

No. Posted a link to the one we had

Did you? Can't find that post...

[paul666root]

Did you? Can't find that post...

on the wiki ?

[thenewkid]

on the wiki ?

that's only on the YASH guide, the Requiem guide still links to the Nexus

[paul666root]

that's only on the YASH guide, the Requiem guide still links to the Nexus

well i didnt update the requiem guide for some time. Only YASh guide has up to date mods. I'll post the link there too

Edited November 30, 2016 by paul666root

[Nozzer66]

Cheers!

[zerohaste]

For the DDSOpt Processing Required parts (Falskaar, Helgen Reborn, and Immersive Weapons) what constraints settings do we use? I'm assuming the main guide for the settings is what you expect us to follow, but there are three constraints settings in it.

[paul666root]

For the DDSOpt Processing Required parts (Falskaar, Helgen Reborn, and Immersive Weapons) what constraints settings do we use? I'm assuming the main guide for the settings is what you expect us to follow, but there are three constraints settings in it.

you use this https://wiki.step-project.com/User:Neovalen/Skyrim_Revisited_-_Legendary_Edition/DDSOpt_Processing

and set only resolution to constraints... the one asked in guide.

[zerohaste]

I guess my next question is how do I reset the settings in DDSOpt to default? I've deleted it completely from my computer and emptied my recycle bin but it's still using the same settings I had changed before. I don't know of any other place it puts config files other than where it's extracted to.

[jdsmith2816]

I guess my next question is how do I reset the settings in DDSOpt to default? I've deleted it completely from my computer and emptied my recycle bin but it's still using the same settings I had changed before. I don't know of any other place it puts config files other than where it's extracted to.

Why would you do this...?  Just change the settings..

[zerohaste]

Because I don't remember what the default settings were. I went through the guide I linked a couple posts up changing everything in all the drop down menus including all the constraints it said to change, but that was the wrong thing to do apparently.

[jdsmith2816]

Because I don't remember what the default settings were. I went through the guide I linked a couple posts up changing everything in all the drop down menus including all the constraints it said to change, but that was the wrong thing to do apparently.

The ddsopt guide has a screenshot of every menu item set to the appropriate settings... Just set them to those settings?

[16MnCr5]

Hello,

I think I am having a problem relaret with dyndolod.

Near winhelm there is a statue of talos on a rock high above,whenever i go near to that area i get a crash fix warning. I checked the forms with tes5edit and the involved esp/esm seem to be skyrim.esm and the nsutr merged esp.

It concerns the statue of talos. Mesh problem?

Any ideas?

Thanks