Jump to content
Besidilo

Expanded Towns and Cities

Recommended Posts

Buggy? Neither ETaC nor ELFX is buggy in any way...

 

ETaC might have a negative effect on a heavily modded game if you don't have 150 - 300mb free VRAM room in your current setup. That is how much ETaC generally requires.

 

This has been tested over and over again. ETaC by itself is not the cause of any crashes, freezes or ILS at all.

Share this post


Link to post
Share on other sites

I just meant it seems to have a few more bugs that the author needs to fix. Also, I don't want to use mods that aren't compatible with ELFX/ELE. It ruins it for me. And I uninstalled ETaC from my save game. Everything seems fine and safe.

Share this post


Link to post
Share on other sites

ETaC's bugs were hammered out ages ago.

And there's already a patch for ELFX, albeit not official, that can be downloaded here : https://www.nexusmods.com/skyrim/mods/51137/

The comments section of ETaC was full of people complaining about how the ELFX Patch didn't work or something, idk. I must have read it wrong or maybe the people on the nexus just have no idea what they're talking about. Do you use the ETaC textures or vanilla?

Share this post


Link to post
Share on other sites

I use the vanilla textures in the installer, if that's your question. Because I prefer using my own textures :)

 

The issues people were having were due to the fact that they used the ELFX Exteriors, when the patch for that was released only recently (It's still on the same link)

Share this post


Link to post
Share on other sites

I use the vanilla textures in the installer, if that's your question. Because I prefer using my own textures :)

 

The issues people were having were due to the fact that they used the ELFX Exteriors, when the patch for that was released only recently (It's still on the same link)

It gets really hard to figure out what in the world people are talking about on the Nexus. 

Share this post


Link to post
Share on other sites
Reading posts like these' date=' I am extremely happy I decided not to use ENB and saved me time and nerves :P[/quote']

Errr, you do know that all ENBs are compatible with all mods, right? Unless you meant ELFX. D:

Share this post


Link to post
Share on other sites

The unofficial ELFX patch says "It prevents major conflicts and crashes that may be encountered using these two mods together. It does NOT balance lighting issues that may result from getting rid of the conflicts.".

 

Does that mean that it doesn't actually apply any of the ELFX changes to the ETaC Interiors? It just prevents CTDs

Share this post


Link to post
Share on other sites

The more I play with this mod the more I love it.

In case you ever noticed the locked abandoned mine in Riverwood, it's an alcoholic's (and hermit-enchanter's) haven.

Posted Image

Share this post


Link to post
Share on other sites

Is that ELFX patch needed with REGS? With all the patches and compatibility issues that come with ELFX - exteriors I might just trade it for LoS <.>

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Omniguous
      the arguments '-iknowwhatimdoing' and '-allowmasterfilesedit' should NOT be entrenched into the STEP guide.
      for starters: nothing you do with xEdit actually requires the latter one.
      and the first is NOT meant 'simply for disabling a single pop-up': it does much more and the user is /meant/ to -ahem- KNOW WHAT IT IS and WHAT THEY DO. hence, the name.
      This applies to SSE, as well.
      thanks.
    • By sheson
      This is a beta of [FNV|FO3|FO4|FO4VR|TES5|SSE|TES5VR|ENDERAL|ENDERALSE]LODGen/Edit with terrain LOD meshes and textures generation.
      This is for experienced mod authors and users that know how to use xEdit, xLODGen or DynDOLOD already.
      Installation and Setup
      Download
      xLODGen beta 80 - based on 4.1.3g
      Unzip into a dedicated folder outside of any game and Steam folders or special Windows folders like Program Files.
      (Pro users can merge with existing xEdit installation. Make sure to overwrite older LODGen.exe/LODGenx64.exe TexConv.exe/TexConvx64.exe in Edit Scripts. All other files with the same filenames are the same as the latest version of xEdit.)
      Rename xLODGen.exe to [game mode]LODGen.exe (TES5LODGen.exe for example) or start with command line parameter -fnv, -fo3, -fo4, -fo4vr, -tes5, tes5vr, -sse, -enderal, -enderalse
      Use -o:"c:\OutputPath\" command line parameter to change where files are generated to, default is the game folder. Use this if a mod manager with a virtual file system (like MO) is used.
      Do not generate into any game or any mod manager folders that are part (direct or indirect) of the virtual file system.
      Requirements
      Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019 - Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which xLODGen.exe (x86) or xLODGenx64.exe (x64) is used.
      RTFM and Share Results
      See the included Skyrim-Occlusion-Readme.txt for a brief explanation of the Skyrim TVDT Occlusion data generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions or give feedback in the dedicated Skyrim TVDT - Occlusion Data thread.
      See the included Terrain-LOD-Readme.txt for a brief explanation of the settings for terrain LOD generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions about terrain LOD in this thread for a more in-depth explanation if required and share feedback (with screenshots) about results or problems.
      These tools generate LOD meshes and textures "exactly" like CK, but not like the meshes and textures which are shipping with the games (they are often manually edited).
      However, these tools provide more options and higher resolutions (use the x64 version if there are memory errors because you believe you require 4k or higher) and can be updated to add more useful features and options.
      I did some testing in the different games, but finding the best combinations of options and settings requires lots of testing and are a matter of personal opinion and which game is used, the load order, mods, even different worldspaces probably.
      That means, I am only able to give generic guidelines and hints to send you off to find and test for yourself and share your results. My main interested is that generations works correctly and without problems for now.
      Check out the thread xLODGen Terrain Settings Compare. Also refer to any modding guide which has a list of relevant mods close to your load order.
      The object and tree LOD generation is the same as the current versions of xEdit / xLODGen. Refer to their respective descriptions and explanations.
      Obviously, users of Skryim/Enderal/Skyrim SE/Skyrim VR/EnderalSE continue to use the easier and more comprehensive DynDOLOD for drastically improved object and tree LOD generation and only use xLODGen for terrain LOD (and maybe Occlusion) generation.
      First Time
      Here are suggestion to start without going crazy and that should be quick enough to generate:
      Set quality of meshes for LOD4 to 5 and then +5 for each next level. Or just set levels 8/16/32 to 10.
      Check protect cell borders (yes it fixes the ugly terrain drops at outer cell borders that still exist in Fallout 4).
      Use the max vertices setting only if you want to hard limit max file size.
      In Skyrim Special Edition or Skyrim VR, if you notice terrain briefly flickering when new areas are loading in, set [Display] bEnableLandFade=0 in Skyrim.INI
      Set Optimize Unseen to off for LOD4 for first generation. Start experimenting with a value of 550 with a quality setting of 10 or lower for LOD32 (used for map) and compare coastlines and file size to other settings.
      To quickly generate terrain LOD meshes just for the map, check only terrain LOD Meshes, check the Specific Chunk checkbox and set drop down to 32. Leave SW fields empty for complete map or set SW cell coordinates to same values as a *.btr filename to test a specific area with lots of water, river etc.
      Set texture sizes to 512 for a start. Larger sizes and large world spaces will take a considerable time (like 15 to 30 minutes or more easily). Each higher resolution means quadruple the work.
      Use DXT1 for diffuse and 565 (DXT5 if on Windows 7) for normal maps. If generating for Skyrim Special Edition use BC7. Uncheck mipmaps, raise steepness and Bake normal maps.
      For now, leave the Brightness, Contrast and Gamma at 0 and 1.0 respectively. It seems that only Skyrim CK and Skyrim SE CK are manipulating the intensity of the textures to adjust for the noise.dds and the god awful "improved" snow shader of Skyrim SE (just turn that thing off, really). If textures seem too dark in the game, brighten the noise.dds instead or vice versa. That way you can get perfectly matching LOD textures that look just like the textures in the loaded cells. For Skyrim a good average color of the noise texture seems to be around #C0. See below for a couple noise texture downloads.
      If you want to test larger texture sizes, use the chunk option to limit the number of textures that need to be generated. For example, check [x] Specific chunk, leave the drop down empty and set WS to the lower left cell coordinate of an 32x32 area, like 0, 0. It will then generate all textures up to 31,31. Not all worldspaces have their origin at 0,0 so you will have to check already generated meshes/texture filenames for their lower left coordinates.
      Questions and Feedback
      Obliviously anything related to terrain LOD should be posted in this thread.
      Posts related to Occlusion should be made here.
      Recommended Optionals
      TES5-Terrain-Tamriel.esm, SSE-Terrain-Tamriel.esm
      TES5-Terrain-Tamriel-Extend.esm, SSE-Terrain-Tamriel-Extend.esm - These extend the sea of ghost further to the north (see screenshots)
      SSE-Terrain-Tamriel-Full-Extend.esm - Entire map from -96,-96 to 95,96 with northern ocean extension. Useful for mod authors.
      Put in game data folder obviously. Adds back terrain for Skyrim (Tamriel worldspace) at the outer edges so there is no missing terrain meshes/textures when generating terrain LOD for Skyrim.
      Load as early with lowest priority as possible, so that any other plugins overwriting or adding land records or cells with the same coordinates take precedence.
      Only required to be loaded when generating terrain LOD. No harm done when loaded in-game but typically the player can not get close to these areas. There are no effects outside the far away added cells.
      Noise
      Single color flat noise, Adjusted vanilla noise, HD Terrain Noise Texture SE
      Examples for Skyrim. Install to game folder like any other texture mod. The noise texture is applied in-game on top of terrain LOD textures, so no effect for LOD generation.
      Only the red channel is used in case the textures is not a grey channel format. MipMaps are ignored. The textures is tiled 3x3 per LOD quad, e.g. for LOD level 4, the noise texture is repeated 3 times to cover 4 cells, for LOD level 8, the noise texture is repeated 3 times to cover 8 cells and so on.
      Test-Terrain-Tamriel.7z
      For testing terrain LOD distances. Plain color terrain LOD textures for Tamriel with coordinates for every LOD quad. Green for LOD 4, yellow for LOD8, blue for LOD 16 and red for LOD 32.
    • By z929669
      Discussion topic:
      Embers XD by mindflux
      Wiki Link
      Install Lite version with the Lite beta update file. I also used the "High Quality" option for Embers XD rather than "Optimized"
      Use EmbersHD.esp plugin from main file (chose for compatibility in chaning from Enbers HD ... not sure if prudent) Set Embers XD.esp plugin from Lite beta update file as optional plugin in MO (It looks like Embers XD.esp (v2.2.3) = EmbersHD.esp (v2.2.1)) Install all add-ons (need screens for magic effect) Do not install any patches Place after Embers HD in load order (disable Embers HD and Inferno to match the Embers XD screens) NOTE: Embers XD is ENB compatible but performs nicely without ENB.
      Campfires: Inferno + Embers HD (Step) > Embers XD (orange/red flames)

       
      Sconces: Inferno + Embers HD (Step) > Embers XD (orange/red flames)

       
      Torches: Ultimate HD Torch (Step) > Inferno + Embers HD > Embers XD (orange/red flames)

      NOTE: Torch flames for Ultimate HD Torch and Inferno + Embers HD lick very fast. Embers XD flames lick more slowly and behave more realistically.
       
      Forge: Inferno + Embers HD (Step) > Embers XD (orange/red flames)

      NOTE: FPS gain with Embers XD ... need someone to confirm.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.