Jump to content

DynDOLOD 3.00 Alpha 182


sheson

Recommended Posts

So, after running xLODGen and TexGen, DynDOLOD is getting stuck between different world spaces. In the console window, it only gets to LOD Level 4 before closing itself. Then, in the main DynDOLOD window, it eventually stops with the timer running. I know saying, "It's frozen, HALP" isn't very specific, but what are some areas that I can look at to try and solve this problem?

DynDOLOD waits for all LODGen processes to finish. If there are any problems, post the logs as explained on the first post. 

Link to comment
Share on other sites

I was wondering if you could help me understand how to use this setting in DynDOLOD_SSE.ini.  Couldn't find anything in the manual, and the comments are not entirely clear:

; set to a value > 0 and <= number of CPU cores
; lower values = more main threads = more memory usage - not nessarily faster/slower
; higher values = less main threads = less memory usage - not nessarily slower/faster
LODGenThreadSplit=4

I would expect a setting that, say, limits the maximum number of simultaneous threads to a given number.  That idea aligns well with the comment on the first line, but seems to be contradicted by the following comments.  How does this number actually relate to the number of threads?  And does it have anything to do with the subprocesses that are spawned in CMD windows?  Or am I misunderstanding that?  I have played around a bit with this number and not really noticed any effect.  (But to be clear, I have loads of RAM and would like DynDOLOD to do as much in parallel as possible.)

Link to comment
Share on other sites

I was wondering if you could help me understand how to use this setting in DynDOLOD_SSE.ini.  Couldn't find anything in the manual, and the comments are not entirely clear:

 

I would expect a setting that, say, limits the maximum number of simultaneous threads to a given number.  That idea aligns well with the comment on the first line, but seems to be contradicted by the following comments.  How does this number actually relate to the number of threads?  And does it have anything to do with the subprocesses that are spawned in CMD windows?  Or am I misunderstanding that?  I have played around a bit with this number and not really noticed any effect.  (But to be clear, I have loads of RAM and would like DynDOLOD to do as much in parallel as possible.)

In this context a main thread is started for each LOD quad. LODGen divides the number of cores by this value to limit the max number these threads that are allowed run in parallel. In return sub-threads like processing LOD models for each quad are allowed higher concurrency limits.

Link to comment
Share on other sites

Hi sheson, thank you for all the excellent tools you continue to make, support, and document! I noticed a possible issue that I'm not sure was present in the 2.x versions. When launching the game with `-tes5vr` to start the tools in Skyrim VR mode, the config file `DynDOLOD_SSE.ini` does not seem to be loaded the way the documentation suggests (`/GameMode.html`). Snippet below pulled from Alpha 27

 

If DynDOLOD or TexGen are started in the TES5VR game mode for Skyrim VR, the tools will use the configuration and rule files from SSE for simplicity sakes.

 

I tried setting `Wizard=0` to test. and it was not honored using only the flag. I was successful explicitly renaming the file to match the mode/environment though, to `DynDOLOD_TES5VR.ini`, as the docs also suggest. Otherwise no issues for me so far using 3.x in VR with the most recent versions.

Link to comment
Share on other sites

Hi sheson, thank you for all the excellent tools you continue to make, support, and document! I noticed a possible issue that I'm not sure was present in the 2.x versions. When launching the game with `-tes5vr` to start the tools in Skyrim VR mode, the config file `DynDOLOD_SSE.ini` does not seem to be loaded the way the documentation suggests (`/GameMode.html`). Snippet below pulled from Alpha 27

 

I tried setting `Wizard=0` to test. and it was not honored using only the flag. I was successful explicitly renaming the file to match the mode/environment though, to `DynDOLOD_TES5VR.ini`, as the docs also suggest. Otherwise no issues for me so far using 3.x in VR with the most recent versions.

Thanks. Will be fixed next version.

Link to comment
Share on other sites

Hi! First of all thank you so much Sheson for your incredible work!

I was wondering if I could have some help with this issue. I'm getting a massive amount of draw calls as I look over to Whiterun. Is this normal?

Cheers

Probably not, but what does that have to do with LOD or with DynDOLOD 3.0 Alpha specifically?

Link to comment
Share on other sites

I thought that Dyndolod might have been a factor in the increased amount of draw calls in my game. I started noticing the fps decrease after having dyndolod create my dynamic and grass lods....

Please, if you posts questions provide information. For example the fact that grass LOD was generated. Grass, game settings etc. See second post about performance.

 

Test the impact of static object, tree and terrain LOD by turning it off with tll in console.

 

Test impact of dynamic LOD by disabling it in DynDOLOD SKyUI MCM.

Edited by sheson
Link to comment
Share on other sites

I was wondering if you have any suggestion for how to determine good settings for the TexGen grass billboard lighting parameters, especially Direct and Ambient?  At the moment I am changing the numbers a bit, re-running TexGen + DynDOLOD, and then loading the game to eyeball the effect under controlled weather conditions.  But as you imagine, this adjustment loop takes some time.

 

Is there anything I could measure from a screenshot (say, using the eyedropper tool in GIMP) that would give a better idea of how much I should change these values?  And since they both affect brightness under different lighting conditions, are there particular weather settings I should use?  For example, maybe one needs two screenshots under two different weathers, in order to (hopefully) isolate the two variables.  But I don't know how the variables relate to the eventual colors I see on screen.

Link to comment
Share on other sites

I was wondering if you have any suggestion for how to determine good settings for the TexGen grass billboard lighting parameters, especially Direct and Ambient?  At the moment I am changing the numbers a bit, re-running TexGen + DynDOLOD, and then loading the game to eyeball the effect under controlled weather conditions.  But as you imagine, this adjustment loop takes some time.

 

Is there anything I could measure from a screenshot (say, using the eyedropper tool in GIMP) that would give a better idea of how much I should change these values?  And since they both affect brightness under different lighting conditions, are there particular weather settings I should use?  For example, maybe one needs two screenshots under two different weathers, in order to (hopefully) isolate the two variables.  But I don't know how the variables relate to the eventual colors I see on screen.

I originally tested with white and the 0.5 gray textures in the game to determine a specific color/brightness shift. Didn't really help me much. It is just inconsistent to everything, weather, time of day, distance, view angle, everything. There are just too many variables having an effect. Even the color of the transparent pixels of the grass texture play a role, since they can become part of the edges when a model is rendered because of mipmapping. (Have look at TexGen_SSE.INI to control even more aspects of the rendering).

 

Ambient/Direct for grass have more or less the same effect, since the grass shader in the game does not use normal maps, hence the direct light setting does not illuminate from a specific direction.

 

The RGB brightness settings in the INI / export file can be used to change the tint. I had their original values from generating grass LOD with the vanilla grass full textures. Then adjusted the TexGen brightness to match that (and what I know from billboard tree LOD). Then I fine tuned the RGB values again to what they are now.

 

Just make sure to use the short cuts by only updating the texture atlas directly or by just executing LODGen for a specific quad after changing the values in the export file.

 

But yeah, you will spend dozen of hours constantly starting the game cow tamriel x y etc.

Link to comment
Share on other sites

HI Sheson, thanks for all the work on the new version and all your past work of course!

 

Question on the RGB brightness settings in the DynDOLOD_SSE.ini for grass (following up on your answer above): Are those settings used only during Dyndolod generation or are they used during Texgen processing as well?  I am wrestling a bit with the brightness of the distant grass as well (see below), though I am a bit torn as to whether it's just something I am getting used to, not seeing grass at that distance before:

 

 

TTlwdYx.png

 

If I wanted to darken those circled areas at distance, are the RGB grass settings the best way to go about doing so?  I was thinking of perhaps using the eydropper to pick a target color, and try regenerating, but wanted to check whether that would be the best approach.  Thanks again for everything you're doing! :)

Edited by Wolfpack49
Link to comment
Share on other sites

HI Sheson, thanks for all the work on the new version and all your past work of course!

 

Question on the RGB brightness settings in the DynDOLOD_SSE.ini for grass (following up on your answer above): Are those settings used only during Dyndolod generation or are they used during Texgen processing as well?  I am wrestling a bit with the brightness of the distant grass as well (see below), though I am a bit torn as to whether it's just something I am getting used to, not seeing grass at that distance before:

 

 

TTlwdYx.png

 

If I wanted to darken those circled areas at distance, are the RGB grass settings the best way to go about doing so?  I was thinking of perhaps using the eydropper to pick a target color, and try regenerating, but wanted to check whether that would be the best approach.  Thanks again for everything you're doing! :)

For attempting to match the colors, I would suggest turning off the extended grass draw distance in GrassControl.config.txt, and choosing the setting in DynDOLOD_SSE.ini to draw grass LOD closer.  Then it will be easier for you to see your transition line between normal grass and grass LOD.

 

I suspect the direct/ambient settings in TexGen will produce "better" results for color matching, which is why I'm expending some effort on it.  I think the RGB multipliers in DynDOLOD_SSE.ini are intended for final adjustments after you've gotten the colors fairly close.

 

Once you do have the colors fairly close, you can then obtain good DynDOLOD_SSE.ini settings for the RGB multipliers by running DynDOLOD twice.  First you need to run it with whatever settings are in your file (if you've tweaked them a lot, then maybe pick something close to 0.400 to get a good starting point).  Then, go somewhere where you can see the grass/LOD transition, pick a time of day and a weather condition, and take a screenshot.

 

Open the screenshot in GIMP, and use the color picker to measure the color of both the normal grass and the LOD grass (use the color picker settings to take an average over some area of your screenshot large enough to contain several grass instances).  For each of the RGB values, take the ratio (real/LOD).  Then go into DynDOLOD_SSE.ini and change the RGB multipliers like this:

 

new_RGB_value = old_RGB_value * (measured_real_RGB / measured_LOD_RGB)

 

where the measured values come from your screenshot.  Provided your starting guesses (the old_RGB_value's) were close enough, this procedure will get you a pretty good match in color, after you run DynDOLOD again.  But, only at the time of day and weather that you chose for the screenshot.

Link to comment
Share on other sites

Just make sure to use the short cuts by only updating the texture atlas directly or by just executing LODGen for a specific quad after changing the values in the export file.

What do I need to do to only run DynDOLOD on the cells I'm interested in seeing?  And is there a nice way to find out those cell coordinates, names, or whatever, in game?

 

Link to comment
Share on other sites

 

Question on the RGB brightness settings in the DynDOLOD_SSE.ini for grass (following up on your answer above): Are those settings used only during Dyndolod generation or are they used during Texgen processing as well? 

The RGB top and bottom brightness settings in the INI are added to the header part of export file for LODGen. They are applied when LODGen generates the BTO meshes. As explained in the second post, it is quickest to change the in the export file and generate a specific BTO using the expert mode. 

 

What do I need to do to only run DynDOLOD on the cells I'm interested in seeing?  And is there a nice way to find out those cell coordinates, names, or whatever, in game?

See second post or ..\DynDOLOD\docs\help\GrassLOD.html (same content, but with internal links to other help files) "Updating"

 

Start DynDOLOD in expert mode ..(\DynDOLOD\docs\help\Expert.html). Use Specific chunk option. Click Execute LODGen button.

Edited by sheson
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.