AyleidRuin

EDIT: Found a solution with MO and WFlash. Moderator may DELETE this post. Thank You STEP Community!

EDIT: My Fault! Moved MO Outside Fallout Directory and WFlash recognizes my Mod list. Yay! Original Post: Hi guys! I apologize in advance if this is covered. New Vegas+Mod Organizer+BOSS+Wrye Flash+FNVEdit=all installed and working. *When I open Wrye Flash in MO the file tree won't recognize the MODS in Mod Organizer.* IOW: I open MO then I open WF inside MO exe options and the mods in WF are NOT what I have enabled in MO. I haven't found anything so I'm asking here. Thank You STEP Community! ^verified  or at least that's how I have to do it. Which is No Problem and glad it works this way :) I don't use BUM in 2nd MO for fallout NV.

I don't have the High Quality Texture Packs. At least nothing above 2048x. A year ago my MO Mod folder was close to 20GB. so All extracted=25GB. So you should be safe but if your worried and you have all the Mods DL right click the folder->hit properties and see the total. But I'm sure you knew this. If yea haven't DL STEP and your other mods. It can't be more than 25GB extracted.

My MO Mods folder is 12.1GB so figure about 14-17GB extracted. Though that might be a little high. STEP core: 10GB=a conservative estimate. But I Don't Know.

update: I fixed my problem for this post. I used the generic v0004 for Nvidia Optimus on ENB dev website. and oh yea...since running ENB: My Wierd POV Line shadow shenanigans are pretty much gone. lol. Thanks guys. original ENB post: Thank You Aiyen and Salvador for the info and being patient with me:DÂ

edit: after using ENB for the little time I had it is Definitely Superior to SweetFX. Hands Down. Mainly because ALL of the settings. @Present n a little OFF TOPiC: I'm following STEP guide for ENB install. Installed it like I did a few times b4. same thing. Huge Performance hit. gunna disable some of the enb settings. I use to sweetfx IN RadeonPRO cause I am also able to use VIRTU MVP with its Virtual Vsync. Which is great by the way. But if I Use ENB (at least with the dbd9.dll...even proxied) virtu won't enable. Thanks for the Replies Guys! I'm hit'n my stride!

GOT IT! will take your last reply and go from there. Thank you so much for your help Salvador.

post deleted. The Answer I seek is the reply before this one.

post deleted. Said about a youtube vid offering fshadowdistance=8000 but its a trade off. cause you have to lower quality. Or keep shadow distance @ 3000 and raise shadowbiasscale=.9 1.0 is max for this setting. ^I don't recommend this.

Tried ENB but with a performance hit: ENB v0004 n   EVB Boost, gave me too low of drops. like waiting 5s to turn just a hair. gunna have to tweak this for optimum setting. THANK YOU SALVADOR! You are narrowing my endless search. I will get enb working then, just gotta tamper and prod...

ah, Thank You Salvador for saying it is a Shadow issue. I thought it had to do with the shadows but then shader/wrong texture/my pc is dumb kept popping in my head.Which explained a lot of whats happening with me. I will try what You Have Suggested. BUT! My shadowdistance is set at 3000. interiorshadowdistance is also 3000 here's my skyrimprefs.ini [display] only bDeferredShadows is off cuz sum1 said after update 1.7 to turn it off. shadowbiasScale=.3 instead of .15 the rest is STEP + ULTRA

fShadowBiasScale=.3000 is the closest fix I came too. Some said .6 or more but .25 and .3 were the ones I found to be stable. I think .1500 is ultra settings in skyrim launcher.

I'll try that out Nearox. @thunderclam its probobly what step recommends: aa/af application default. IOW don't override in CCC/RadeonPRO. I forgot to mention that SMAA is working for me now. its just hard to see. I use 13.8beta=CCC Will still try what thunderclam said and try to proxy the library. I don't think Virtu will like it though. At least it didn't a year ago when I tried.

Hey guys. Been reading your posts and thought I would chime in if you don't mind. there are 6 versions of Grass on Steroids (with 3 versions for SFO compatibility) The Tall version (to tall for me, i'm gunna get lost) The Goldilocks Version (double height than vanilla) The Natural Version with a NO HEIGHT increase. all have a Skyrim Flora Overhaul compatibility patch. Wanted to drop in bcuz I'm thinking of adding Grass on Steroids (version=no height increase). And the claim it boosts FPS. Nexus=Grass On Steroids: https://skyrim.nexusmods.com/mods/33582/?tab=1&navtag=%2Fajax%2Fmoddescription%2F%3Fid%3D33582%26preview%3D&pUp=1

I am now getting Infinite Loading Screens with the STEP ZFighting tweak. so I reverted that back to ultra default. Going to try a compromise between the 2. (step zfight tweak and vanilla) Terrain Manager is what I am talking about under skyrimprefs. STEP Z Fighting Tweak: [Terrainmanager] fBlockMaximumDistance=500000 fBlockLevel1Distance=140000 fBlockLevel0Distance=75000 fSplitDistanceMult=4.0 Vanilla: [TerrainManager] fTreeLoadDistance=25000.0000 fBlockMaximumDistance=100000.0000 fBlockLevel1Distance=32768.0000 fBlockLevel0Distance=20480.0000 fSplitDistanceMult=0.7500 bShowLODInEditor=0 Maybe blockLevel1=100000 + level2=50000 maybe the fSplitDistanceMult=2

Thanks for the reply Aiyen. I will check them out.gunna try reinstalling SIMM.the vid ain't clear but it happens on everything. so reinstalling Static Mesh Improvement mod might work.

[EDIT] My problem was a Shadow Line Render Issue. ENB Series Works Wonders on shadows lines and many other things. From Skylighting to SSAO. I had to use the .0004 also with my build for compatibility. Answer: Backup/EDiT SkyrimPrefs.ini Under [Display] section change fshadowdistance=10000.0000 You probably don't need the .0000 (ten thousanths) place mark. Salvador said 12000 or higher. If your PC can handle it. [EDIT] fNearDistance=19.0000 or any number from 15.0000-23.0000 is another fix I found Also this Might interest someone: Thank You STEP Community. Original Post. Didn't think I should delete it. Maybe it should:

Yea I tried it and either I picked to many settings or added more over "skyrim ultra" then I should have.Epic Fail for me using cfg maker :P

I am creating this thread in hopes to give someone some answers on a board that uses Lucid Logics Virtu MVP with a AMD GPU while using RadeonPRO.This is what I have learned with a board that supports Virtu MVP and with a AMD vid card using Virtu's Virtual VSync. SETUP: UPDATE: Thank You for your time and Thank You STEP Community

This is to help the usual problems that people have CTDs, Infinite Loading Screen, Low FPS. Thank You STEP Community. You have all helped my headaches turn into bliss.

I am following STEP 2.2.6 and I thought Immersive armors and weapons were part of STEP 2.2.6. I saw they weren't listed and found my way here. Using skyRE, Reproccer, FNIS, Boss, Wyre Bash, Tes5edit and SKSE. All with Mod Organizer. Using just ini suggestions from Step 2.2.6. Just wanted to say No bugs or CTDs or Huge Price jumps or anything weird that I can tell. Lvl32 Nord with +50hrs. here's my mod list: Msi z77a GD65 (using Virtu for Virtual VSync) i5 3570 HD7770 1GB 16GB RAM gskill 1TB hdd using 360 controller with Mods/Interface/Hotkeys

My solution, after a lot of ini switching/loading game back to switch...was the SkyrimPrefs.ini Terrain Manager Z-fighting Fix. Which Works. Thanks Torminator and Nostra [Terrainmanager] fBlockMaximumDistance=500000 fBlockLevel1Distance=140000 fBlockLevel0Distance=75000 fSplitDistanceMult=4.0 this is STEP default for the Zfighting. And I don't know how, though I did it, it got some more values added to it. So after thinking it was preloadsize/shadows/Draw Block Distance/something else...it was this all along. It's a Z-Fighting fix. Uno the distant mountain peaks doing this fast flickering texture fight. It's in a lot of games. Here's the link. Its here on S.T.E.P. https://wiki.step-project.com/Guide:Z-Fighting#tab=What_is_your_fix_3F or just google "Skyrim STEP Z-Fighting" And you'll come to it. NOTE that I did NOT have the infinite loop transitioning from interior to exterior after I "RESTORED" my skyrimprefs to the Zfight fix under terrain manager. Was able to go where ever I wanted. No ctd/infinite load. And was able to raise values on shadows and what not. Hope this helps :) Thank You Torminator and Nostra. Your posts made me compare the old values and see my screw up. And boy I'll tell yea. Copying and Pasting other peoples ini tweaks, even from reputable sites/ppl gets me into a lot of trouble and headaches. I must have 20 different Backed up ini folders from different tweaks. lol  live and learn.

same thing happening here. Clean install to revert of ini. z-fighting huh?...don't want to go back but I'll try it.

Mod Organizer, SkyRE and ReProccer. After reading a few guides/forum posts and watching the gopher vid Sanctuary 59. I have found that I have to download and install JAVA x32. I just redid my pc. So I installed java x64 but not x32. after DL java x32 and install, I was able to "add to exe" in Mod Organizer. Reproccer opened (while MO was locked). My Commodo firewall asked for permission AND it also said ReProccer wanted to interact with BOSS.exe. I allowed it. Reproccer Opened and Patched. I am about to start (finally) my New Game and test it out. I think I will be a nord this time. Just wanted to post my exp. The S.T.E.P. guide was a little vague on executibles. Other than that I have been following STEP for quite awhile and have learned Many, Many, things from STEP and its users posts. Thank You