DynDOLOD 3.00 Alpha 180

[adancau]

I have the same issue, where I get the same error concerning DynDOLOD Resources.

I have just upgraded to DynDOLOD Resources SE 3.00 (Main, vAlpha-18) from Nexus (from the previous Alpha - it was the most routine upgrade). I have triple checked that I have installed the correct file (I'm in MO2).

I have also upgraded to the latest DynDOLOD 3.0 Alpha-63.

This is what I see in the log:

[00:01] DynDOLOD Resources SE: 3.00 <= 3.00 <= 3.00
[00:01] Error: DynDOLOD Resources SE issue. Do not install DynDOLOD Resources intended for other game versions. Do not modify any of the files. Verify the archive downloaded completely and all core files were installed.
[00:11] User says "Exit DynDOLOD"

For the record, I am using Skyrim SE (1.5.97)

EDIT: Downgraded to DynDOLOD Resources SE 3.00 (Main, vAlpha-17), problem disappears (using the same DynDOLOD 3.0 Alpha-63 executable)

Edited January 14, 2022 by adancau

[Winterlove]

+1 here, also seeing the issue, exactly as described, I'm using Alpha-63 DynDOLOD, Alpha-18 SE Resources.

[Jayombi]

Skyrim VR

 

Same error concerning DynDOLOD Resources SE 3. DynDOLOD Keeps saying wrong version when it is intentionally the right one.

[Thardrim]

7 hours ago, sheson said:

Use default settings for TexGen.

If it generates all rendered objects and then has a problem it is either will billboards or stitched. Just run with only one main option enabled. If it is billboards, only enable on of the options at a time to see which one it is.

Add a line RealTimeLog=1 to ..\DynDOLOD\Edit Scripts\DynDOLOD\TexGen_SSE.INI. Clear out all old logs in the log folder. Then run with only the option that has the problem. Upload all log files that are now in the log folder. Check main folder again if it might have create a bugreport.txt this time.

Do not truncate any of the logs. Upload entire log of the session to a file service if needed.

Using default settings for TexGen. Rendered and Stitched Objects are generated correctly - no crashing generating them when I enable only those options. The problem is with billboards. If I enable Grass and/or HD trees, it always crashes. If I don't enable those options and use the default options (no Grass - no HD trees) sometimes it crashes, sometimes it doesn't.

Here are the logs that were in \Logs after every sesion - unfortunately, no bugreport.txt is generated:

https://ufile.io/i6oy9cu1 (HD Trees and Grass - CRASH)

https://ufile.io/atfo3hkv (Default - no HD trees, no Grass - CRASH)

https://ufile.io/f/vhje4 (Default - no HD tress, no Grass - SUCCESSFUL)

 

Thanks again

P.S. As you can see, when it crashes, only the realtime log is generated.

Edited January 14, 2022 by Thardrim

[ButchDiavolo]

I too have this error with the latest versions (DynDOLOD alpha63 and DynDOLOD alpha18 Resources. TexGen went fine, but when starting DynDOLOD generation the error occurs

Here are the error logs.

[sheson]

1 hour ago, adancau said:

I have the same issue, where I get the same error concerning DynDOLOD Resources.

I have just upgraded to DynDOLOD Resources SE 3.00 (Main, vAlpha-18) from Nexus (from the previous Alpha - it was the most routine upgrade). I have triple checked that I have installed the correct file (I'm in MO2).

I have also upgraded to the latest DynDOLOD 3.0 Alpha-63.

This is what I see in the log:

[00:01] DynDOLOD Resources SE: 3.00 <= 3.00 <= 3.00
[00:01] Error: DynDOLOD Resources SE issue. Do not install DynDOLOD Resources intended for other game versions. Do not modify any of the files. Verify the archive downloaded completely and all core files were installed.
[00:11] User says "Exit DynDOLOD"

For the record, I am using Skyrim SE (1.5.97)

EDIT: Downgraded to DynDOLOD Resources SE 3.00 (Main, vAlpha-17), problem disappears (using the same DynDOLOD 3.0 Alpha-63 executable)

41 minutes ago, Winterlove said:

+1 here, also seeing the issue, exactly as described, I'm using Alpha-63 DynDOLOD, Alpha-18 SE Resources.

11 minutes ago, ButchDiavolo said:

I too have this error with the latest versions (DynDOLOD alpha63 and DynDOLOD alpha18 Resources. TexGen went fine, but when starting DynDOLOD generation the error occurs

Here are the error logs.

Uploading again as DynDOLOD Resource 3 SE as Alpha-19, see if that works.

[ButchDiavolo]

10 minutes ago, sheson said:

 

Uploading again as DynDOLOD Resource 3 SE as Alpha-19, see if that works.

Generating as we speak. I see you took out the giantfire thingie. Was that the issue?

[adancau]

Can confirm the error is gone.

One small observation - the new file is called DynDOLOD 3.00 (Main, vAlpha-19), used to be DynDOLOD Resources SE 3.00 (Main, vAlpha-##) - it's not an issue though and installs with the proper mod name

Edited January 14, 2022 by adancau

[sheson]

2 minutes ago, ButchDiavolo said:

Generating as we speak. I see you took out the giantfire thingie. Was that the issue?

I think the publishing script really packed the LE version and gave it the SE filename. When I blame the script it probably means it was a firstborn pressing the wrong button.

[ButchDiavolo]

10 minutes ago, sheson said:

I think the publishing script really packed the LE version and gave it the SE filename. When I blame the script it probably means it was a firstborn pressing the wrong button.

*nods* Probably mine then. Runs in the family.

EDIT: *looks around* Ok... it stumbles in the family

Edited January 14, 2022 by ButchDiavolo

[banky409]

12 minutes ago, sheson said:

Uploading again as DynDOLOD Resource 3 SE as Alpha-19, see if that works.

This did it for me, currently generating lod.  ty sheson, unfortunately I dont intend to have any first born to give you, but should it happen, the demon spawn is definitely yours.

[sheson]

24 minutes ago, Thardrim said:

Using default settings for TexGen. Rendered and Stitched Objects are generated correctly - no crashing generating them when I enable only those options. The problem is with billboards. If I enable Grass and/or HD trees, it always crashes. If I don't enable those options and use the default options (no Grass - no HD trees) sometimes it crashes, sometimes it doesn't.

Here are the logs that were in \Logs after every sesion - unfortunately, no bugreport.txt is generated:

https://ufile.io/i6oy9cu1 (HD Trees and Grass - CRASH)

https://ufile.io/atfo3hkv (Default - no HD trees, no Grass - CRASH)

https://ufile.io/f/vhje4 (Default - no HD tress, no Grass - SUCCESSFUL)

 

Thanks again

P.S. As you can see, when it crashes, only the realtime log is generated.

Check the Windows event log if there is a report in there.

While the tool runs, check main memory and video memory usage.

Maybe disable anything like Geforce experience or software from the graphics card maker, overlays etc. Everything else that is equally unnecessary running in the background.

[Winterlove]

54 minutes ago, sheson said:

Uploading again as DynDOLOD Resource 3 SE as Alpha-19, see if that works.

Confirmed, seems to be happy now. Well, at least as far as this problem is concerned. I seem to be getting a crash partway through running DynDOLOD itself (I don't have time right now to drill down into it, sadly). Still, thank you for fixing the original problem!

[chumik6000]

I get a crush with new latest version of DynDOLOD 3.00 alpha 63 (cant save a game, i can load my old save but when make a new one i get crush)

https://drive.google.com/file/d/1Jug0dJG_TkgfNWpvLgg2mUrz9SIgIQzt/view?usp=sharing

resaver says this: https://drive.google.com/file/d/1AvXnkzSfZJENglvi7YLfvSqjPiWZbCju/view?usp=sharing

Is there is a way to fix this? Ty!

[sheson]

1 hour ago, chumik6000 said:

I get a crush with new latest version of DynDOLOD 3.00 alpha 63 (cant save a game, i can load my old save but when make a new one i get crush)

https://drive.google.com/file/d/1Jug0dJG_TkgfNWpvLgg2mUrz9SIgIQzt/view?usp=sharing

resaver says this: https://drive.google.com/file/d/1AvXnkzSfZJENglvi7YLfvSqjPiWZbCju/view?usp=sharing

Is there is a way to fix this? Ty!

Why do you believe the game crashing while saving has anything to do with DynDOLOD or the latest Alpha?

On https://dyndolod.info/FAQ read answers for ILS or CTD

If there are problems saving in Skyrim Special Edition, install SSE Engine Fixes 4.8 or newer and set SaveGameMaxSize = true in the EngineFixes.toml. Alternatively add/set [SaveGame] uiCompression=1 in Skyrim.INI to change from the default 2 for LZ4 to 1 for zlib compression. 0 means no compression like games are saved in Skyrim.