Unresolved FormID

[Dagnathur]

First: Thank you Sheson et. al for DynDOLOD.

I have been using for a while (prior versions) without issue by RTFM advise & some great YouTube video tutorials.
With the DynDOLOD 3 I thought I would upload and give an attempt.
No issues with TexGen. DynDOLOD stops on the Heljarchen Farm Revamped mod. 
I know you cannot know my load order or what conflicts may exist. I am hoping you can translate the message below so I can look into learning more about the inner workings of modding. 

Thanks,
Dag

****ERROR COPIED BELOW*******

[Window Title]

DynDOLOD

 

[Main Instruction]

Unresolved FormID [5D01616C]

 

[Content]

Scripts Script Properties Property Value Object Union Object v2 FormID [5D01616C] < Error: Could not be resolved > 

Error in HeljarchenFarm.esp SKHFWorkbenchBeamRef [REFR:5D029640] (places SKHFWorkbenchBeam "Workbench Control" [ACTI:5D02963F] in GRUP Cell Persistent Children of [CELL:00000D74] (in Tamriel "Skyrim" [WRLD:0000003C]) at 8,7)

 

Help for this message

 

[Exit DynDOLOD]

 

[Footer]

DynDOLOD FAQ | Support Forum | Copy message to clipboard

[z929669]

48 minutes ago, cb2001 said:

I'm getting unresolved form id's on CC content, I'm NOT running AE though have updated the CC content though. Should I try editing them or is this normal from the updates and should just wait?

 

It seems like Steam may have you running on SAE. You should not have the CC content under SSE.

[cb2001]

7 minutes ago, z929669 said:

It seems like Steam may have you running on SAE. You should not have the CC content under SSE.

I thought Campfire was pre-ae...I'm gonna delete my steam install, install the cc content and try again. I'll update when I've tried 

[z929669]

10 minutes ago, cb2001 said:

I thought Campfire was pre-ae...I'm gonna delete my steam install, install the cc content and try again. I'll update when I've tried 

Well, I'm no expert on CC content. All I know is that SAE installs it unless you opt in in SSE. I could be leading you astray. You can check your version in a number of ways, but I right click on SkyrimSE.exe and look at properties > details.

[sheson]

6 hours ago, cb2001 said:

I'm getting unresolved form id's on CC content, I'm NOT running AE though have updated the CC content though. Should I try editing them or is this normal from the updates and should just wait?

Click the Help for this message link to open ..\DynDOLOD\docs\help\Unresolved.html, which explains in great detail what the error means and gives a few hints for their cause and how to fix it.

Read the entire error message. Pay attention to "Update.esm might be the wrong version." Looks like the paid mod you are using expects a different Update.esm.

Errors are never "normal".

[Serial_Suicide]

Hi everyone, I have just tried out alpha 56 and I have received this error message while running DynDOLODx64:

 

Unresolved FormID [0501616C]

Unofficial Skyrim Special Edition Patch.esp might be the wrong version.

Error in Locations.esp SKHFWorkbenchBeamRef [REFR:D3029640] (places

SKHFWorkbenchBeam "Workbench Control" [ACTI:D302963F] in GRUP Cell Persistent

Children of [CELL:00000D74] (in Tamriel "Skyrim" [WRLD:0000003C]) at 8,7)

 

I confirm I have indeed what can be considered the wrong version of USSEP:  I didn't upgrade to AE and I'm playing Skyrim 1.5.97 with USSEP 4.2.5b (which I believe was the last one before the update). Is there a walkaround for this, like using an earlier alpha? Older files are archived on the Nexus and I don't have access to them.

 

Thanks in advance for any reply.

[z929669]

35 minutes ago, Serial_Suicide said:

Hi everyone, I have just tried out alpha 56 and I have received this error message while running DynDOLODx64:

 

Unresolved FormID [0501616C]

Unofficial Skyrim Special Edition Patch.esp might be the wrong version.

Error in Locations.esp SKHFWorkbenchBeamRef [REFR:D3029640] (places

SKHFWorkbenchBeam "Workbench Control" [ACTI:D302963F] in GRUP Cell Persistent

Children of [CELL:00000D74] (in Tamriel "Skyrim" [WRLD:0000003C]) at 8,7)

 

I confirm I have indeed what can be considered the wrong version of USSEP:  I didn't upgrade to AE and I'm playing Skyrim 1.5.97 with USSEP 4.2.5b (which I believe was the last one before the update). Is there a walkaround for this, like using an earlier alpha? Older files are archived on the Nexus and I don't have access to them.

 

Thanks in advance for any reply.

Seems like it may be related to Papyrus version update. Also see DynDOLOD DLL topic, which supports all historic SSE game versions, AFAIK.

It is all a moot point if sheson is not supporting SSE 1.5.97 any longer (if older version of DynDOLOD Resources is needed).

[Nikklez]

Hello, I'm having trouble with DynDoLOD. TexGen completes perfectly fine DynDoLOD errors out every time after 3 minutes. I am using the x64 and have disabled real time protection in windows defender.

[Window Title]
DynDOLOD

[Main Instruction]
Access violation at address 0000000000F9072B in module 'DynDOLODx64.exe'.

[Content]
Read of address 0000000000000000.

bugreport.txt - https://paste.ee/p/ZJBnX

DynDOLOD_SSE_log https://paste.ee/p/IQrED

 

[sheson]

3 hours ago, Serial_Suicide said:

Hi everyone, I have just tried out alpha 56 and I have received this error message while running DynDOLODx64:

 

Unresolved FormID [0501616C]

Unofficial Skyrim Special Edition Patch.esp might be the wrong version.

Error in Locations.esp SKHFWorkbenchBeamRef [REFR:D3029640] (places

SKHFWorkbenchBeam "Workbench Control" [ACTI:D302963F] in GRUP Cell Persistent

Children of [CELL:00000D74] (in Tamriel "Skyrim" [WRLD:0000003C]) at 8,7)

 

I confirm I have indeed what can be considered the wrong version of USSEP:  I didn't upgrade to AE and I'm playing Skyrim 1.5.97 with USSEP 4.2.5b (which I believe was the last one before the update). Is there a walkaround for this, like using an earlier alpha? Older files are archived on the Nexus and I don't have access to them.

 

Thanks in advance for any reply.

Read the linked help page https://dyndolod.info/Messages/Unresolved-Form-ID that opens for Click on this link for additional explanations and help for this message

The runtime version is irrelevant. Install the correct Unofficial Patch version for whatever version the game plugin files are.

Then fix the Location.esp to not link to or use records that do not exist in the load order.

The error exist in the plugins of the load order. Using different DynDOLOD versions does not change/fix/cause errors in plugins.

[sheson]

On 12/8/2021 at 9:32 PM, Nikklez said:

Hello, I'm having trouble with DynDoLOD. TexGen completes perfectly fine DynDoLOD errors out every time after 3 minutes. I am using the x64 and have disabled real time protection in windows defender.

[Window Title]
DynDOLOD

[Main Instruction]
Access violation at address 0000000000F9072B in module 'DynDOLODx64.exe'.

[Content]
Read of address 0000000000000000.

bugreport.txt - https://paste.ee/p/ZJBnX

DynDOLOD_SSE_log https://paste.ee/p/IQrED

 

When making posts, upload the debug log to a file service as well as explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs.

Pay attention to the  Unresolved FormID error messages and fix them as explained at https://dyndolod.info/Messages/Unresolved-Form-ID

Either install the correct version of RealisticWaterTwo.esp for which MoonStarRWpatch.esp was created for or vice versa.

[Serial_Suicide]

Thak you both! Well, the link in the error message didn't work for me, but I was so focused on the unofficial patch that I didn't consider the obvious. "Locations.esp" (I know, I have a fervid imagination when it comes to names) is a merged plugin that I have recently changed, and probably messed up something there. At this point the solution should be simple enough. It seems I'm finally going to play this game

[Berzerkernox]

https://controlc.com/b3433c31. I have updated WryeBash to the most recent highly experimental, set my exceptions for xLodGen, TexGen64, and Dyndolod64 but keep getting this error in Dyndolod. I also set this to run  on Win8 Compatability. If I have not provided the right log please let me know. Thanks.

[sheson]

On 12/9/2021 at 1:35 PM, Berzerkernox said:

https://controlc.com/b3433c31. I have updated WryeBash to the most recent highly experimental, set my exceptions for xLodGen, TexGen64, and Dyndolod64 but keep getting this error in Dyndolod. I also set this to run  on Win8 Compatability. If I have not provided the right log please let me know. Thanks.

[Window Title]
DynDOLOD

[Main Instruction]
Unresolved FormID [0100314B]

[Content]
Update.esm might be the wrong version.

Error in ccqdrsse002-firewood.esl ccQDRSSE002_CampfireFurn "Campfire" [FURN:FE00F804]

Click on this link for additional explanations and help for this message

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which explains what log files to upload when making posts.

As explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#Read-Log-and-Error-Messages, read the linked help page https://dyndolod.info/Messages/Unresolved-Form-ID  that opens for Click on this link for additional explanations and help for this message.

Read the error message you posted. It does not mention WyreBash or the BashedPatch so it is unclear why you refer to it.
The message says that Update.esm  might be the wrong version. Either that or ccqdrsse002-firewood.esl is the wrong version for the Updates.esm

[Garulero]

Hi, I'm a fan of mooding from Spain. I am starting in this mod and I have a problem with Dyndolod 3.0.
I manage to create the imput with texget, but with Dyndolod it is impossible. I always have this error:

Spoiler

 

[Window Title]
DynDOLOD

[Main Instruction]
Unresolved FormID [02006718]

[Content]
Error in Dawnguard.esm [REFR:02015DC8] (places FXSmokeWispsLg2x1Adjust [MSTT:0001643B] in GRUP Cell Temporary Children of DLC01SoulCairnCraterKeeper [CELL:02002C75] (in DLC01SoulCairn "Recordatorio de las Almas" [WRLD:02001408] at 6,3))

Click on this link for additional explanations and help for this message

FIX THE ERROR as explained in the help OR PERMANENTLY REMOVE THE BROKEN PLUGIN.
Ignore wrong "advice" to only temporarily disable plugins.
Do not try to circumvent the error message, FIX THE ERROR instead.
This is not a DynDOLOD error. DynDOLOD is not crashing.
There is an unresolved error in the mentioned plugin that needs to be fixed.

[Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

 

Anyone have information on this and can help me. Thank you.

[Dramatical]

Hi -

I installed the Elysium wabbajack list, mainly for graphics baseline, but have been slowly adding mods and patching in xedit. I'm trying to run Dyno (MO2) for lods in new lands. Other people in the discord have been able to run Dyno on their list no problem, so I'm not sure why I keep getting this error:

----------------------------

[Window Title]
DynDOLOD

[Main Instruction]
Unresolved FormID [0100314B]

[Content]
Update.esm might be the wrong version.

Error in ccqdrsse002-firewood.esl ccQDRSSE002_CampfireFurn "Campfire" [FURN:FE00C804]

Help for this message

FIX THE ERROR as explained in the help OR PERMANENTLY REMOVE THE BROKEN PLUGIN.
Ignore wrong "advice" to only temporarily disable plugins.
Do not try to circumvent the error message, FIX THE ERROR instead.

[Exit DynDOLOD]

[Footer]
DynDOLOD FAQ | Support Forum | Copy message to clipboard

 

------------------------------

 

I have tried reinstalling Dyno, rolling it back, ran this with anniversary installed (wabbajack has its own version of game files), then also tried downgrading anniversary just in case. Same error no matter what I do. Appreciate any help : )

 

Update: Dyno works on my non-Creation Club Elysium profile. So somehow it is not working with CC assets obtained from creation club. Is there a possible fix or, do you think it is safe to turn off the creation club stuff on the CC profile temporarily for dyno just in this case? I think they are altering the update.esm. 

Edited December 10, 2021 by Dramatical

[sheson]

On 12/9/2021 at 9:55 PM, Garulero said:

Hi, I'm a fan of mooding from Spain. I am starting in this mod and I have a problem with Dyndolod 3.0.
I manage to create the imput with texget, but with Dyndolod it is impossible. I always have this error:

  Hide contents

 

[Window Title]
DynDOLOD

[Main Instruction]
Unresolved FormID [02006718]

[Content]
Error in Dawnguard.esm [REFR:02015DC8] (places FXSmokeWispsLg2x1Adjust [MSTT:0001643B] in GRUP Cell Temporary Children of DLC01SoulCairnCraterKeeper [CELL:02002C75] (in DLC01SoulCairn "Recordatorio de las Almas" [WRLD:02001408] at 6,3))

Click on this link for additional explanations and help for this message

FIX THE ERROR as explained in the help OR PERMANENTLY REMOVE THE BROKEN PLUGIN.
Ignore wrong "advice" to only temporarily disable plugins.
Do not try to circumvent the error message, FIX THE ERROR instead.
This is not a DynDOLOD error. DynDOLOD is not crashing.
There is an unresolved error in the mentioned plugin that needs to be fixed.

[Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

 

Anyone have information on this and can help me. Thank you.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs what log files to upload when making posts.

As explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#Read-Log-and-Error-Messages, read the linked help page https://dyndolod.info/Messages/Unresolved-Form-ID  that opens for Click on this link for additional explanations and help for this message.

"If unresolved form ID errors happen in vanilla game files, consider using the Unofficial Skyrim Legendary Edition Patch or Unofficial Skyrim Special Edition Patch."

On 12/10/2021 at 1:17 AM, Dramatical said:

Hi -

I installed the Elysium wabbajack list, mainly for graphics baseline, but have been slowly adding mods and patching in xedit. I'm trying to run Dyno (MO2) for lods in new lands. Other people in the discord have been able to run Dyno on their list no problem, so I'm not sure why I keep getting this error:

----------------------------

[Window Title]
DynDOLOD

[Main Instruction]
Unresolved FormID [0100314B]

[Content]
Update.esm might be the wrong version.

Error in ccqdrsse002-firewood.esl ccQDRSSE002_CampfireFurn "Campfire" [FURN:FE00C804]

Help for this message

FIX THE ERROR as explained in the help OR PERMANENTLY REMOVE THE BROKEN PLUGIN.
Ignore wrong "advice" to only temporarily disable plugins.
Do not try to circumvent the error message, FIX THE ERROR instead.

[Exit DynDOLOD]

[Footer]
DynDOLOD FAQ | Support Forum | Copy message to clipboard

 

------------------------------

 

I have tried reinstalling Dyno, rolling it back, ran this with anniversary installed (wabbajack has its own version of game files), then also tried downgrading anniversary just in case. Same error no matter what I do. Appreciate any help : )

 

Update: Dyno works on my non-Creation Club Elysium profile. So somehow it is not working with CC assets obtained from creation club. Is there a possible fix or, do you think it is safe to turn off the creation club stuff on the CC profile temporarily for dyno just in this case? I think they are altering the update.esm. 

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs what log files to upload when making posts.

As explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#Read-Log-and-Error-Messages, read the linked help page https://dyndolod.info/Messages/Unresolved-Form-ID  that opens for Click on this link for additional explanations and help for this message.

Install the correct version of Update.esm required by the paid mods.