Jump to content
  • 0
edmundm

[Skyrim SE] Moved MO2, FNIS Stopped working

Question

Ok so recently i realized like a chump I had somehow managed to install MO2 on my C Drive. This is likely due to an immense amount of chuff when I got a new pc. So I went and installed MO2 on a different drive via the installer and copied the C drive install to the new location on my E Drive. I deleted the C drive copy, ran MO2, selected the E drive install as my base directory path to get all my mods again (this base dir path would then change to the mod organizer file in my sse folder after I played the game) and that mostly worked. I launched the game and could play it, started a new game cuz I hadn't played in awhile so I was ok starting fresh again. I had some problems and tried to regenerate my animations to see if that was it. At this point I notice I cannot launch FNIS through MO2 now. The binary is correctly set

E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\mods\FNIS Behavior SE\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe

but nothing happens when I hit play. this is the MO2 log when I try to launch it


16:38:57.507 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\modlist.txt saved
16:40:29.338 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\initweaks.ini saved
16:40:29.341 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\plugins.txt saved
16:40:29.344 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\loadorder.txt saved
16:40:29.347 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\lockedorder.txt saved
16:40:29.347 [D] Load Mechanism: Mod Organizer
16:40:29.348 [D] USVFS DLL Name: usvfs_x64.dll
16:40:29.562 [D] enable local saves: 0
16:40:29.579 [D] Updating VFS mappings...
16:40:29.626 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\archives.txt saved
16:40:29.945 [D] VFS mappings updated <linked 108 dirs, 4 files>
16:40:29.951 [D] Spawning proxyed process < "launch \"E:\\Steam\\steamapps\\common\\Skyrim Special Edition\\data\\tools\\GenerateFNIS_for_Users\" \"E:\\Steam\\steamapps\\common\\Skyrim Special Edition\\data\\tools\\Ge...
16:40:29.952 [D] Creating process hooked: < "\"E:\\Steam\\steamapps\\common\\Skyrim Special Edition\\ModOrganizer.exe\" launch \"E:\\Steam\\steamapps\\common\\Skyrim Special Edition\\data\\tools\\GenerateFNIS_for_User...
16:40:29.998 [D] Waiting for spawned process completion : ModOrganizer.exe (5260)
16:40:30.248 [D] Waiting for process completion not successfull : 258
16:40:30.577 [D] E:\Steam\steamapps\common\Skyrim Special Edition\Mod Organizer\SkyrimSE\profiles\Edmund\lockedorder.txt saved


I should also mention this is the log on booting up MO2, not sure if its relevant


16:38:55.692 [D] ssl support: 1
16:38:55.692 [D] data path: C:/Users/edmun/AppData/Local/ModOrganizer/SkyrimSE
16:38:55.851 [D] Working directory: E:\Steam\steamapps\common\Skyrim Special Edition
16:38:55.851 [D] Loaded settings:
16:38:55.851 [D]   base_directory=E:/Steam/steamapps/common/Skyrim Special Edition/Mod Organizer/SkyrimSE
16:38:55.851 [D]   colorSeparatorScrollbars=true
16:38:55.851 [D]   compact_downloads=false
16:38:55.851 [D]   containedColor=#400000ff
16:38:55.851 [D]   containsPluginColor=#400000ff
16:38:55.851 [D]   crash_dumps_max=5
16:38:55.851 [D]   crash_dumps_type=1
16:38:55.851 [D]   display_foreign=true
16:38:55.851 [D]   executable_blacklist=Chrome.exe;Firefox.exe;TSVNCache.exe;TGitCache.exe;Steam.exe;GameOverlayUI.exe
16:38:55.851 [D]   force_enable_core_files=true
16:38:55.851 [D]   hide_unchecked_plugins=false
16:38:55.851 [D]   language=en
16:38:55.851 [D]   load_mechanism=0
16:38:55.851 [D]   lock_gui=true
16:38:55.851 [D]   log_level=1
16:38:55.851 [D]   meta_downloads=false
16:38:55.851 [D]   nexus_login=false
16:38:55.851 [D]   nmm_version=0.65.2
16:38:55.851 [D]   offline_mode=false
16:38:55.851 [D]   overwritingLooseFilesColor=#40ff0000
16:38:55.851 [D]   overwrittenLooseFilesColor=#4000ff00
16:38:55.851 [D]   style=dark.qss
16:38:55.851 [D]   use_prereleases=false
16:38:55.851 [D]   use_proxy=false
16:38:55.851 [D] initializing core
16:38:55.854 [D] usvfs log messages are written to C:/Users/edmun/AppData/Local/ModOrganizer/SkyrimSE/logs/usvfs-2020-05-05_21-38-55.log
16:38:55.862 [D] Initializing VFS <mod_organizer_instance, 1, 1, C:/Users/edmun/AppData/Local/ModOrganizer/SkyrimSE/crashDumps>
16:38:55.865 [D] downloads after refresh: 0
16:38:55.868 [D] initialize plugins
16:38:55.868 [D] looking for plugins in E:\Steam\steamapps\common\Skyrim Special Edition\plugins
16:38:55.869 [D] loaded plugin "bsa_extractor.dll"
16:38:55.870 [D] loaded plugin "check_fnis.dll"
16:38:55.871 [D] loaded plugin "diagnose_basic.dll"
16:38:55.872 [D] loaded plugin "game_fallout3.dll"
16:38:55.872 [D] loaded plugin "game_fallout4.dll"
16:38:55.874 [D] loaded plugin "game_fallout4vr.dll"
16:38:55.875 [D] loaded plugin "game_falloutNV.dll"
16:38:55.876 [D] loaded plugin "game_morrowind.dll"
16:38:55.877 [D] loaded plugin "game_oblivion.dll"
16:38:55.878 [D] loaded plugin "game_skyrim.dll"
16:38:55.879 [D] loaded plugin "game_skyrimse.dll"
16:38:55.880 [D] loaded plugin "game_skyrimvr.dll"
16:38:55.881 [D] loaded plugin "game_ttw.dll"
16:38:55.881 [D] loaded plugin "inibakery.dll"
16:38:55.882 [D] loaded plugin "inieditor.dll"
16:38:55.882 [D] loaded plugin "installer_bain.dll"
16:38:55.883 [D] loaded plugin "installer_bundle.dll"
16:38:55.884 [D] loaded plugin "installer_fomod.dll"
16:38:55.884 [D] loaded plugin "installer_manual.dll"
16:38:55.885 [D] loaded plugin "installer_ncc.dll"
16:38:55.885 [D] loaded plugin "installer_quick.dll"
16:38:55.985 [D] loaded plugin "FNISPatches.py"
16:38:55.987 [D] loaded plugin "FNISTool.py"
16:38:56.002 [D] loaded plugin "pyCfg.py"
16:38:56.002 [D] loaded plugin "plugin_python.dll"
16:38:56.008 [D] loaded plugin "preview_base.dll"
16:38:56.025 [D] downloads after refresh: 0
16:38:56.025 [D] no plugin splash
16:38:56.025 [D] managing game at E:\Steam\steamapps\common\Skyrim Special Edition
16:38:56.026 [D] setting up configured executables
16:38:56.057 [D] configured profile: Edmund
16:38:56.200 [D] initializing tutorials
16:38:56.806 [D] localization file qt_en not found
16:38:56.806 [D] localization file qtbase_en not found
16:38:56.806 [D] localization file organizer_en not found
16:38:56.806 [D] localization file bsa_extractor_en not found
16:38:56.806 [D] localization file check_fnis_en not found
16:38:56.806 [D] localization file diagnose_basic_en not found
16:38:56.807 [D] localization file game_fallout3_en not found
16:38:56.807 [D] localization file game_fallout4_en not found
16:38:56.807 [D] localization file game_fallout4vr_en not found
16:38:56.807 [D] localization file game_falloutNV_en not found
16:38:56.807 [D] localization file game_morrowind_en not found
16:38:56.807 [D] localization file game_oblivion_en not found
16:38:56.807 [D] localization file game_skyrim_en not found
16:38:56.807 [D] localization file game_skyrimse_en not found
16:38:56.807 [D] localization file game_skyrimvr_en not found
16:38:56.807 [D] localization file game_ttw_en not found
16:38:56.807 [D] localization file inibakery_en not found
16:38:56.807 [D] localization file inieditor_en not found
16:38:56.808 [D] localization file installer_bain_en not found
16:38:56.808 [D] localization file installer_bundle_en not found
16:38:56.808 [D] localization file installer_fomod_en not found
16:38:56.808 [D] localization file installer_manual_en not found
16:38:56.808 [D] localization file installer_ncc_en not found
16:38:56.808 [D] localization file installer_quick_en not found
16:38:56.808 [D] localization file plugin_python_en not found
16:38:56.808 [D] localization file preview_base_en not found
16:38:56.808 [D] localization file FNISPatches_en not found
16:38:56.808 [D] localization file FNISTool_en not found
16:38:56.808 [D] localization file pyCfg_en not found
16:38:56.808 [D] loaded language en
16:38:57.034 [D] interface Ethernet seems to be up (address: 10.155.16.18)
16:38:57.052 [D] localization file bsa_extractor_en not found
16:38:57.052 [D] localization file check_fnis_en not found
16:38:57.053 [D] localization file diagnose_basic_en not found
16:38:57.053 [D] localization file game_fallout3_en not found
16:38:57.054 [D] localization file game_fallout4_en not found
16:38:57.054 [D] localization file game_fallout4vr_en not found
16:38:57.055 [D] localization file game_falloutNV_en not found
16:38:57.055 [D] localization file game_morrowind_en not found
16:38:57.055 [D] localization file game_oblivion_en not found
16:38:57.056 [D] localization file game_skyrim_en not found
16:38:57.056 [D] localization file game_skyrimse_en not found
16:38:57.057 [D] localization file game_skyrimvr_en not found
16:38:57.057 [D] localization file game_ttw_en not found
16:38:57.058 [D] localization file inibakery_en not found
16:38:57.058 [D] localization file inieditor_en not found
16:38:57.059 [D] localization file installer_bain_en not found
16:38:57.059 [D] localization file installer_bundle_en not found
16:38:57.059 [D] localization file installer_fomod_en not found
16:38:57.060 [D] localization file installer_manual_en not found
16:38:57.060 [D] localization file installer_ncc_en not found
16:38:57.061 [D] localization file installer_quick_en not found
16:38:57.061 [D] localization file plugin_python_en not found
16:38:57.061 [D] localization file preview_base_en not found
16:38:57.062 [D] localization file FNISPatches_en not found
16:38:57.062 [D] localization file FNISTool_en not found
16:38:57.063 [D] localization file pyCfg_en not found
16:38:57.066 [D] reading save games from U:/Users/Edmund/Documents/My Games/Skyrim Special Edition/Saves
16:38:57.114 [D] enable local saves: 0
16:38:57.123 [W] "Notice: Your current MO version (2.2.2.1) is lower than the previous version (2.1.6).<br>The GUI may not downgrade gracefully, so you may experience oddities.<br>However, there should be no serious i...
16:38:57.124 [D] displaying main window
16:38:57.473 [D] update available: 2.1.6 -> 2.2.2.1


I understand my moving of MO2 was probably incorrect and the culprit of my issues so now I really just don't want to do anything else unguided to avoid messing up any more  [:crying:]   any help is appreciated!
 

Edited by Greg
Fixed spoiler tags

Share this post


Link to post
Share on other sites

4 answers to this question

Recommended Posts

  • 0

I really hate to say this since you've already gone to the trouble of moving Mod Organizer to a new drive, but Mod Organizer's virtual file system does not work correctly when it's installed in the Steam or game folder so you should move it to its own folder... something like E:\Mods\Mod Organizer or E:\Tools\Mod Organizer.

 

The good news is that it should be very easy to move Mod Organizer. Run File Explorer or Windows Explorer, go to E:\Steam\SteamApps\Common\Skyrim Special Edition, select the Mod Organizer folder and cut. Go back out to E:\, create a new folder called Tools, go into the Tools folder and paste. Since you're doing this on the same drive, all Windows does is move the directory entry to the new folder so it doesn't need to copy all the files.

 

Once you've done this, edit ModOrganizer.ini using Notepad, Notepad++, or your favorite text editor and find/replace all instances of E:\Steam\SteamApps\Common\Skyrim Special Edition\Mod Organizer with E:\Tools\Mod Organizer. You'll also find some paths use forward slashes (e.g. E:/Steam/SteamApps/Common/Skyrim Special Edition/Mod Organizer) so replace these with E:/Tools/Mod Organizer. I don't know if it really makes a difference one way or the other so I just use whichever \ or / Mod Organizer put there.

 

EDIT: I'm not sure what to make of this entry in the log. It seems to be saying MO 2.2.2.1 is older than 2.1.6 so you should update from 2.1.6 to 2.2.2.1?

16:38:57.123 [W] "Notice: Your current MO version (2.2.2.1) is lower than the previous version (2.1.6).<br>The GUI may not downgrade gracefully, so you may experience oddities.<br>However, there should be no serious i...
16:38:57.124 [D] displaying main window
16:38:57.473 [D] update available: 2.1.6 -> 2.2.2.1

 

Share this post


Link to post
Share on other sites
  • 0

Thanks for the speedy reply! Does specifically moving MO to a "Tools" folder make a difference or was that simply for clarity in naming the file path? In any case I'll go ahead and give it a go!

Share this post


Link to post
Share on other sites
  • 0

ok weird turn of events, I've moved it out of my game directory, saw no instance of the old location in the ini, and it still didnt launch as an executable HOWEVER I can successfully launch it via the filetree explorer in MO and it works fine! Got all my animations in there and they work in game. If I run into any issues I'll probably come crawling back but it works ok now so I'll take it.

Share this post


Link to post
Share on other sites
  • 0

Thanks for the speedy reply! Does specifically moving MO to a "Tools" folder make a difference or was that simply for clarity in naming the file path? In any case I'll go ahead and give it a go!

No, that was just for clarity in naming the file path. You can really put Mod Organizer anywhere you want with two exceptions. 1) Do not put it in any UAC controlled folders like C:\Program Files because Windows will give you lots of grief with access denied issues. 2) Do not put it in the Steam or game folder because I seem to recall the virtual file system gets into a recursive loop and fails to work properly.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By sheson
      DynDOLOD DLL for Skyrim, Skyrim Special Edition, Skyrim Anniversary Edition and Skyrim VR
      So far all versions of DynDOLOD use the SKSE plugin PapyrusUtil for the optional dynamic LOD in the game. Starting with version 2.45 there is now the alternative DynDOLOD DLL available.
      The current DLL version is 2.45. It works with dynamic LOD generated by DynDOLOD Standalone 2.45 and newer.
      Read the ..DynDOLOD\Docs\DynDOLOD_DLL.html included in DynDOLOD Standalone for an explanation about DynDOLOD DLL, installation instructions (overwrite papyrus scripts of DynDOLOD Resources) and how it works.
      If there are problems with it, check DynDOLOD_DLL.html and the DynDOLOD FAQ first before posting.
      If a DynDOLOD.DLL version is required for a game version that is not listed below, request it in this thread. First, search this thread if it has been requested already, though. The future will tell how long it takes to release updates.
      Typically a new DynDOLOD.DLL is required for each new game version, but not each new SKSE version. For example a DynDOLOD.DLL compiled with SKSE64 2.0.9 also works with SKSE64 2.0.10 for the same game version.
      Nexus Downloads for DynDOLOD 2.45 and higher
      DynDOLOD DLL for Skyrim
      DynDOLOD DLL SE for Skyrim Special Edition
      DynDOLOD DLL VR for Skyrim VR
      Mega Mirrors:
      DynDOLOD.DLL + Scripts for Skyrim 1.9.32 (overwrite the papyrus scripts included in DynDOLOD Resources)
      DynDOLOD Scripts for Skyrim Special Edition and Skyrim VR (overwrite the papyrus scripts included in DynDOLOD Resources SE)
      DynDOLOD.DLL for Skyrim Special Edition 1.5.39
      DynDOLOD.DLL for Skyrim Special Edition 1.5.50
      DynDOLOD.DLL for Skyrim Special Edition 1.5.53
      DynDOLOD.DLL for Skyrim Special Edition 1.5.62
      DynDOLOD.DLL for Skyrim Special Edition 1.5.73
      DynDOLOD.DLL for Skyrim Special Edition 1.5.80
      DynDOLOD.DLL for Skyrim Special Edition 1.5.97
      DynDOLOD.DLL for Skyrim Special Edition 1.6.318
      DynDOLOD.DLL for Skyrim Special Edition 1.6.323
      DynDOLOD.DLL for Skyrim Special Edition 1.6.342
      DynDOLOD.DLL for Skyrim Special Edition 1.6.353
      DynDOLOD.DLL for Skyrim Special Edition 1.6.629
      DynDOLOD.DLL for Skyrim Special Edition 1.6.640
      DynDOLOD.DLL for Skyrim Special Edition GOG 1.6.659 (untested)
      DynDOLOD.DLL for Skyrim VR 1.4.15
    • By Mopotter
      1. I've been using MO 2 for years for 3 of my games, Skyrim, Skyrim SE and FA4.  No problems and yesterday  I know I did something wrong because the top line of items is missing and Skyrim SE is the only game I can access.  But I don't know what I did or how to fix it.  I've  uninstalled and reinstalled with no change.   Hoping someone has done this and can explain how to fix it.  

    • By sheson
      This is a beta of [FNV|FO3|FO4|FO4VR|TES5|SSE|TES5VR|ENDERAL|ENDERALSE]LODGen/Edit with terrain LOD meshes and textures generation.
      This is for experienced mod authors and users that know how to use xEdit, xLODGen or DynDOLOD already.
      Installation and Setup
      Download
      xLODGen beta 95 - based on 4.1.4b
      Unzip into a dedicated folder outside of any Steam, game or mod manager folders or special Windows folders like Program Files.
      Rename xLODGen.exe to [game mode]LODGen.exe (TES5LODGen.exe for example) or start with command line parameter -fnv, -fo3, -fo4, -fo4vr, -tes5, tes5vr, -sse, -enderal, -enderalse
      Use -o:"c:\OutputPath\" command line parameter to change where files are generated to, default is the game folder. Then install output as a mod.
      Do not generate into any game, any mod manager folders or special Windows folder like Program Files x86.
      Requirements
      Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019 - Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which xLODGen.exe (x86) or xLODGenx64.exe (x64) is used.
      RTFM and Share Results
      See the included Skyrim-Occlusion-Readme.txt for a brief explanation of the Skyrim TVDT Occlusion data generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions or give feedback in the dedicated Skyrim TVDT - Occlusion Data thread.
      See the included Terrain-LOD-Readme.txt for a brief explanation of the settings for terrain LOD generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions about terrain LOD in this thread for a more in-depth explanation if required and share feedback (with screenshots) about results or problems.
      These tools generate LOD meshes and textures "exactly" like CK, but not like the meshes and textures which are shipping with the games (they are often manually edited).
      However, these tools provide more options and higher resolutions (use the x64 version if there are memory errors because you believe you require 4k or higher) and can be updated to add more useful features and options.
      I did some testing in the different games, but finding the best combinations of options and settings requires lots of testing and are a matter of personal opinion and which game is used, the load order, mods, even different worldspaces probably.
      That means, I am only able to give generic guidelines and hints to send you off to find and test for yourself and share your results. My main interested is that generations works correctly and without problems for now.
      Check out the thread xLODGen Terrain Settings Compare. Also refer to any modding guide which has a list of relevant mods close to your load order.
      The object and tree LOD generation is the same as the current versions of xEdit / xLODGen. Refer to their respective descriptions and explanations.
      Obviously, users of Skryim/Enderal/Skyrim SE/Skyrim VR/EnderalSE continue to use the easier and more comprehensive DynDOLOD for drastically improved object and tree LOD generation and only use xLODGen for terrain LOD (and maybe Occlusion) generation.
      First Time
      Here are suggestion to start without going crazy and that should be quick enough to generate:
      Set quality of meshes for LOD4 to 5 and then +5 for each next level. Or just set levels 8/16/32 to 10.
      Check protect cell borders (yes it fixes the ugly terrain drops at outer cell borders that still exist in Fallout 4).
      Use the max vertices setting only if you want to hard limit max file size.
      In Skyrim Special Edition or Skyrim VR, if you notice terrain briefly flickering when new areas are loading in, set [Display] bEnableLandFade=0 in Skyrim.INI
      Set Optimize Unseen to off for LOD4 for first generation. Start experimenting with a value of 550 with a quality setting of 10 or lower for LOD32 (used for map) and compare coastlines and file size to other settings.
      To quickly generate terrain LOD meshes just for the map, check only terrain LOD Meshes, check the Specific Chunk checkbox and set drop down to 32. Leave SW fields empty for complete map or set SW cell coordinates to same values as a *.btr filename to test a specific area with lots of water, river etc.
      Set texture sizes to 512 for a start. Larger sizes and large world spaces will take a considerable time (like 15 to 30 minutes or more easily). Each higher resolution means quadruple the work.
      Use DXT1 for diffuse and 565 (DXT1 if on Windows 7) for normal maps. If generating for Skyrim Special Edition and VRAM is not of concern use BC7. Uncheck mipmaps, raise steepness and Bake normal maps.
      For now, leave the Brightness, Contrast and Gamma at 0 and 1.0 respectively. It seems that only Skyrim CK and Skyrim SE CK are manipulating the intensity of the textures to adjust for the noise.dds and the god awful "improved" snow shader of Skyrim SE (just turn that thing off, really). If textures seem too dark in the game, brighten the noise.dds instead or vice versa. That way you can get perfectly matching LOD textures that look just like the textures in the loaded cells. For Skyrim a good average color of the noise texture seems to be around #C0. See below for a couple noise texture downloads.
      If you want to test larger texture sizes, use the chunk option to limit the number of textures that need to be generated. For example, check [x] Specific chunk, leave the drop down empty and set WS to the lower left cell coordinate of an 32x32 area, like 0, 0. It will then generate all textures up to 31,31. Not all worldspaces have their origin at 0,0 so you will have to check already generated meshes/texture filenames for their lower left coordinates.
      Questions and Feedback
      Obliviously anything related to terrain LOD should be posted in this thread.
      Posts related to Occlusion should be made here.
      Recommended Optionals
      TES5-Terrain-Tamriel.esm (Mega), SSE-Terrain-Tamriel.esm (Mega)
      TES5-Terrain-Tamriel-Extend.esm (Mega), SSE-Terrain-Tamriel-Extend.esm (Mega) - These extend the sea of ghost further to the north (see screenshots)
      SSE-Terrain-Tamriel-Full-Extend.esm (Mega) - Entire map from -96,-96 to 95,96 with northern ocean extension. Useful for mod authors.
      Put in game data folder obviously. Adds back terrain for Skyrim (Tamriel worldspace) at the outer edges so there is no missing terrain meshes/textures when generating terrain LOD for Skyrim.
      Load as early with lowest priority as possible, so that any other plugins overwriting or adding land records or cells with the same coordinates take precedence.
      Only required to be loaded when generating terrain LOD. No harm done when loaded in-game but typically the player can not get close to these areas. There are no effects outside the far away added cells.
      Noise
      Single color flat noise, Adjusted vanilla noise, HD Terrain Noise Texture SE
      Examples for Skyrim. Install to game folder like any other texture mod. The noise texture is applied in-game on top of terrain LOD textures, so no effect for LOD generation.
      Only the red channel is used in case the textures is not a grey channel format. MipMaps are ignored. The textures is tiled 3x3 per LOD quad, e.g. for LOD level 4, the noise texture is repeated 3 times to cover 4 cells, for LOD level 8, the noise texture is repeated 3 times to cover 8 cells and so on.
      Test-Terrain-Tamriel.7z
      For testing terrain LOD distances. Plain color terrain LOD textures for Tamriel with coordinates for every LOD quad. Green for LOD 4, yellow for LOD8, blue for LOD 16 and red for LOD 32.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.