reddvilzz

Okay I'll try and look for the logs of the created DynDOLOD as per readme. Sent from my ONEPLUS A5010 using Tapatalk

All the other options are working though, but not the body textures / overlay features. Any idea on how to fix it? Fast travelling using console command doesn't give CTD, only by carriages and it's not after fast travelling but it happens when I hop on to the carriage and then the load screen shows up, 3 seconds later CTD. So it is not even completed yet. I've tested it, the papyrus log doesn't show up anything though regarding the CTD. Sent from my ONEPLUS A5010 using Tapatalk

Hi sheson, Do you have any clue why with DynDOLOD enabled my racemenu paint section is all emptied? Removing DynDOLOD esp restore it back. Also when I have it activated, I keep CTD every time I entered the load screen whenever I use the carriages to fast travel no matter where it is or where it goes the CTD always happened 3 around 3 secs after the load screen started. Sent from my ONEPLUS A5010 using Tapatalk

I think I've found the issue, DynDOLOD.esp is causing the CTD. Without it at the usual ctd place I can walk through. Weird, what's causing the DynDOLOD to behave like that?

I've done it, here is my statuessnow folder looks like https://imgur.com/a/9Bda3TN in MO

That's my first thought and I've checked it 3 times letter by letter and everything is correct. Hitting the brick wall here. The same crash occur when I'm walking from cragswallow slope near keld nar to windhelm. I swear Windhelm is like my bane of modding, I was having this issue a year ago so I nuke my SSE but become to lazy to start everything again, I was having an issue near windhelm as well before which you have helped me resolve it. After that I just keep getting ctd still near windhelm with your solution. Sent from my ONEPLUS A5010 using Tapatalk

Keep getting a constant crash, I'm starting as a necromancer then heading to windhelm. After passing clearspring tarn and keep heading to darkwater crossing I keep crashing near the bridge. Any idea what causing it? Sent from my ONEPLUS A5010 using Tapatalk

Something I noticed while surfing around the reddit, do we need to run CCOR Compatibility scripts + CCOR Break It Down script in xEdit to make the extra armors compatible with CCOR? Or does the mod take care itself? Sent from my ONEPLUS A5010 using Tapatalk

You could try using ordenador to reduce all textures to 1K or just hand pick any texture mods that have resolution bigger than 1K. I've been there and I know the struggle. Sent from my ONEPLUS A5010 using Tapatalk

Get constant CTD when reaching windhelm / windhelm stables. And I have no idea how to identify the missing meshes (my biggest culprit maybe) or is there something else causing it. Any idea where can I start troubleshooting this? Sent from my ONEPLUS A5010 using Tapatalk

Okay, I'm asking because I'm about to update my LE to the latest but in the meantime I'm starting to mod my SSE. Just confirming if the changelog is not yet updated or there is nothing changed in the guide. Sent from my ONEPLUS A5010 using Tapatalk

Is there no more updates after 27 of March? Or is it because the changelog hasn't been updated? Sent from my ONEPLUS A5010 using Tapatalk

I've missed a couple CR that is standalone I think, where can I find 1.58 and 1.58.3? Because it is not released as an updated CR for the nexus right? Or are they included in the testing CR 1.59.1? Sent from my ONEPLUS A5010 using Tapatalk

Surfing through reddit with city overhauls and ICAIO installed, even arthmoor says it is fine to use them but you must load the city overhauls after ICAIO so the navmesh from the city mods are being used instead of navmesh from ICAIO. Well obviously there will be slight issue but it is the best results if you want to use both of them. Load game CTD is a life saviour, no longer I have crashes while loading my game with those pesky footIK with this mod and the load time is very minimal, at least I don't noticed it at all since I just minimize skyrim while it is loading after all. I use REGS too with this guide, but only some of them and mostly the city overhaul mods, well if you're experienced in xEdit you can hand picked them on what you want to use and not judging by the conflicts. That's personally what I've done so far. And I don't use CK at all to fix the conflict only to regenerate NAVI. So far no issue. Sent from my Nexus 5 using Tapatalk

This could be worth adding https://www.nexusmods.com/skyrim/mods/88676 Sent from my Nexus 5 using Tapatalk

This is what I get from clicking the link for the Test CR on the guide, 404That file isn’t here anymore Someone might’ve deleted the file or disabled the link.

The test CR, when I clicked on it last night. Sent from my Nexus 5 using Tapatalk

I'm pretty sure the last errors near the bottom that caused the no menu etc, could you post a screenshot when you open those records with the "Error Unresolved" ? Or you could just remove those errors and I think you're good to go. Pretty sure. For some reason the new test CR points out to a deleted file @LadyLexy? Just tried to open it yesterday night. Sent from my Nexus 5 using Tapatalk

Have you try and check for any error unresolved on the post installation? Bashed patch, ASIS and maybe the CR itself, in my experience when I had this problem usually because of this. I thought fps limiter could behave the same as vsync at least in skyrim? Because we mainly use it to cap the fps so there won't be anything weird happening with the game engine. Also when you have frame limiter on for 58fps I don't think vsync is needed anymore because vsync supposed to hold the framerate equals to the monitor refresh rate. While you're limiting the fps I think it will overlap and just disregard the vsync. Sent from my Nexus 5 using Tapatalk

I thought that is fixed by the mod Multiple Floor Sandboxing, I remember someone mentioned that. Sent from my Nexus 5 using Tapatalk

I was having this issue before, not sure what I did to fixed it. Too much fixing involved from there to now. It's not FNIS definitely. Raw guess, have you tried to load the previous save before you select the vanilla start? And reselect it? If I remember correctly you'll be able to move when you're in Helgen Keep until you're hands is unbind. I think this is mostly the third person camera mods that cause it, because you're not supposed to see your character not until your hands is unbind. Sent from my Nexus 5 using Tapatalk

What happened to Moonlight Tales Special Edition? Will it still make it to the guide? Looks like there was no follow up about that. Also about RRR Enhanced Edition, anyone ever add it to this guide? Small issue I'm also having, in the ASLAL my status of mara didn't have voice follow up when I choose a start option but the initial dialog when interacting with the status is voiced. Any idea why? I merged the ASLAL with the expansion though and the bsa is correctly named. Sent from my Nexus 5 using Tapatalk

Why not leave the essential and just install the full version? Instead of having 2 of them. I haven't read all of the description though but just guessing the essentials feature should be in the full version of it right? Sent from my Nexus 5 using Tapatalk

I was using gtx 750ti before same as you and the same amount of ddr3 ram. Only difference is my cpu i7-4770. But before I was having the same issue with crashing and it turns out when I tested it with different profile, the crash caused by too many 2K textures. In my test profile I only have mountains with 2K textures while the rest is 1K and the crashes stopped. I mean not completely stopped though just reduced. I was thinking the crashes sometimes could related to the vram even though it is not showing in SPM, but pushing the your vram way out of your limits could causes issue tbh. Might want to try what I did there. But since I changed to 1070ti my 1K texture profiles runs way smoother without no more crashes. Sent from my Nexus 5 using Tapatalk

Yup it is fixed. Sent from my Nexus 5 using Tapatalk