DynDOLOD 3.00 Alpha 190

[sheson]

  On 2/4/2025 at 9:11 PM, Phlunder said:

Like this?

Expand  

Yup.

[Phlunder]

First problem, yes it fixed the seams, but the UV is very messed up otherwise. Can't see it in Blender or NifSkope:

 

Second problem is exactly the same:

[sheson]

  On 2/4/2025 at 9:17 PM, Phlunder said:

First problem, yes it fixed the seams, but the UV is very messed up otherwise. Can't see it in Blender or NifSkope:

 

Second problem is exactly the same:

Expand  

deadtree01_lod.nif has a UV scale of greater than 1.0 in the shader settings.

Can you upload the object report, toor? I will look at the statue tomorrow.

[Phlunder]

  On 2/4/2025 at 10:37 PM, sheson said:

deadtree01_lod.nif has a UV scale of greater than 1.0 in the shader settings.

Can you upload the object report, toor? I will look at the statue tomorrow.

Expand  

Thanks, I had no idea about that entry in the shader settings!

Here's the object report: 

https://drive.google.com/file/d/1o3y9Wm0bnC9EG7LHm_x3346YTMPablv8/view?usp=sharing

[sheson]

  On 2/4/2025 at 11:20 PM, Phlunder said:

Thanks, I had no idea about that entry in the shader settings!

Here's the object report: 

https://drive.google.com/file/d/1o3y9Wm0bnC9EG7LHm_x3346YTMPablv8/view?usp=sharing

Expand  

The texture of the LOD model is being replaced with the texture replacement defined on the base record.

To prevent that, you should change the shape name in the LOD model so it does not match the full mode.
If  a LOD model actually defines a *lod.dds texture, use the typical _LOD in the shape name, e.g. SovngardeStatue01_LOD:0
It should then leave it alone and not apply the replacement.

[Phlunder]

  On 2/5/2025 at 12:17 PM, sheson said:

The texture of the LOD model is being replaced with the texture replacement defined on the base record.

To prevent that, you should change the shape name in the LOD model so it does not match the full mode.
If  a LOD model actually defines a *lod.dds texture, use the typical _LOD in the shape name, e.g. SovngardeStatue01_LOD:0
It should then leave it alone and not apply the replacement.

Expand  

Thanks for checking the mesh, I will apply the suggested tweaks to it. In this case, the shape name really matched. Sometimes its a generic name from Blender instead. 

Ah yes, I also noticed that standard for the vanilla LOD resources, regarding the _LOD in the shape name, appreciate the explanation.

[wizkaliffa]

Hello,

I got an Item Not Found error while running the most recent 3.0 version.

[Window Title]
DynDOLOD

[Main Instruction]
Error: Item not found.

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

Logs are attached

The debug log is 242MB and I wasn't able to post it anywhere but I uploaded it to google drive if necessary

https://drive.google.com/file/d/1DV1LPKHdDfxwj7US9nx0LZCzyXMx1FSd/view?usp=sharing
 

DynDOLOD_SSE_log.txtFetching info... bugreport.txtFetching info...

[sheson]

  On 2/7/2025 at 7:14 PM, wizkaliffa said:

Hello,

I got an Item Not Found error while running the most recent 3.0 version.

[Window Title]
DynDOLOD

[Main Instruction]
Error: Item not found.

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

Logs are attached

The debug log is 242MB and I wasn't able to post it anywhere but I uploaded it to google drive if necessary

https://drive.google.com/file/d/1DV1LPKHdDfxwj7US9nx0LZCzyXMx1FSd/view?usp=sharing
 

DynDOLOD_SSE_log.txt 1.57 MB · 0 downloads bugreport.txt 93.49 kB · 0 downloads

Expand  

That's an odd one - not the item not found itself of course - but where it happens.

Is this reproducible a second time if you run again?

In that case check if still happens with the test version from this post https://stepmodifications.org/forum/topic/20141-dyndolod-300-alpha-182/page/684/#findComment-284087

[wizkaliffa]

  On 2/7/2025 at 8:51 PM, sheson said:

That's an odd one - not the item not found itself of course - but where it happens.

Is this reproducible a second time if you run again?

In that case check if still happens with the test version from this post https://stepmodifications.org/forum/topic/20141-dyndolod-300-alpha-182/page/684/#findComment-284087

Expand  

I was able to reproduce it the error, though it was a different Item Not Found. It gave me this code C0000005

With the test version, I've had multiple different issues ranging from the program unexpectedly shutting down to outright freezing my OS. pasted below is the error message from the most recent run. I've also tried lowering my settings from high to medium to see if that helped with the memory issue but Dyndolod closed out after about 15 minutes. Added most recent bug report and logs, with a new link for the most recent debug log

[Window Title]
DynDOLOD

[Main Instruction]
Error: External exception 80000003.

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

 

https://drive.google.com/file/d/14nZNtRCH3pQ1MWc14lQOZgDGMmqAvwpg/view?usp=sharing

 

DynDOLOD_SSE_log.txtFetching info... bugreport.txtFetching info...

[sheson]

  On 2/8/2025 at 3:07 AM, wizkaliffa said:

I was able to reproduce it the error, though it was a different Item Not Found. It gave me this code C0000005

With the test version, I've had multiple different issues ranging from the program unexpectedly shutting down to outright freezing my OS. pasted below is the error message from the most recent run. I've also tried lowering my settings from high to medium to see if that helped with the memory issue but Dyndolod closed out after about 15 minutes. Added most recent bug report and logs, with a new link for the most recent debug log

[Window Title]
DynDOLOD

[Main Instruction]
Error: External exception 80000003.

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

https://drive.google.com/file/d/14nZNtRCH3pQ1MWc14lQOZgDGMmqAvwpg/view?usp=sharing

DynDOLOD_SSE_log.txt 2.49 MB · 1 download bugreport.txt 46.13 kB · 1 download

Expand  

This seems to indicate a problem with the PC, like an hardware issue, CPU, Memory, BIOS settings etc.

Make sure the PC is stable with prime95, OCCT etc. test and verify memory settings in the BIOS.

[wizkaliffa]

  On 2/8/2025 at 7:26 AM, sheson said:

This seems to indicate a problem with the PC, like an hardware issue, CPU, Memory, BIOS settings etc.

Make sure the PC is stable with prime95, OCCT etc. test and verify memory settings in the BIOS.

Expand  

Reporting back that a BIOS update did solve the issue. For anyone else running an MSI MAG Tomahawk Z790 and updating BIOS to ver H.E0 (09/26/2024) fixed all errors

[sheson]

  On 2/8/2025 at 5:46 PM, wizkaliffa said:

Reporting back that a BIOS update did solve the issue. For anyone else running an MSI MAG Tomahawk Z790 and updating BIOS to ver H.E0 (09/26/2024) fixed all errors

Expand  

Great! Thanks for letting us know.

[xcal68]

More of a feature request: Would it be possible to make it so all the swap errors are found at once, instead of stopping the entire process when it finds one?  Run the program... stops on a circular swap... run the program... stops on a circular swap and over and over.  I have tons of _swap.ini.

[sheson]

  On 2/10/2025 at 12:49 PM, xcal68 said:

More of a feature request: Would it be possible to make it so all the swap errors are found at once, instead of stopping the entire process when it finds one?  Run the program... stops on a circular swap... run the program... stops on a circular swap and over and over.  I have tons of _swap.ini.

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

Just one example session that shows such an error, so I can determine the source for it.

[xcal68]

It's the error that tells you there's a circular reference in a _swap.ini file and to "permanently" remove all references to Dyndolod.  I don't actually need troubleshooting help.  Did you still need logs?  I can consider it when I'm home, if you do.