Jump to content

DynDOLOD 3.00 Alpha 182


sheson

Recommended Posts

36 minutes ago, koushkinn said:

Thanks to this amazing new mod : Skyrim VR ESL Support Skyrim VR support light plugin.

I unmerged my mods and can run my Skyrim VR with a total 348 plugin now, but running dyndolod and textgen gaive me this error :
Error: Too many full modules.

Is it possible to force Dyndolod and Textgen to run without the plugin limit like the SE version ?

Moved to the DynDOLOD 3 Alpha thread.

The next alpha version will support Skyrim VR ESL

Link to comment
Share on other sites

  • sheson changed the title to DynDOLOD 3.00 Alpha 160
1 hour ago, MITSUYOMI said:

Hello, Im trying to create a 3d lod resource file for Ulvenwald and I seem to be having desaturated or lighter textures for LODs. I have attached a picture of the specific tree (left - full model and right - 3d lod model). image.thumb.png.62e1105ca7c6f303bb47292e57eccb94.png

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Posts-Logs which TexGen and DynDOLOD log and debug log to upload when making posts.

Also upload ..\DynDOLOD\Logs\DynDOLOD_SSE_Tree_Report.txt

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of a full model with affected LOD with more informative console.

Link to comment
Share on other sites

13 hours ago, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Posts-Logs which TexGen and DynDOLOD log and debug log to upload when making posts.

Also upload ..\DynDOLOD\Logs\DynDOLOD_SSE_Tree_Report.txt

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of a full model with affected LOD with more informative console.

Hello, this is the link for the logs and the screenshots i've packed them on a zip file. https://ufile.io/tss6zj9h.

Link to comment
Share on other sites

48 minutes ago, MITSUYOMI said:

Hello, this is the link for the logs and the screenshots i've packed them on a zip file. https://ufile.io/tss6zj9h.

LOD does not receive or cast shadows, so when comparing a full model to LOD, check the full tree without shadows.

What version of Ulvenwald is being used?
Upload meshes\dyndolod\lod\trees\treepineforestsnow04_9e655edcpassthru_lod.nif
Also upload E:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD\DynDOLOD_Tamriel.dds

Link to comment
Share on other sites

4 hours ago, MITSUYOMI said:

Hello, this is the link for the logs and the screenshots i've packed them on a zip file. https://ufile.io/tss6zj9h.

You probably want to face and smooth the normals and then update the tangent spaces (in NifSkope), so they are closer to the full model.
Before that you might also need to flip some of the double sided faces to face up to the sky. In Blender/3DSMax.
If it is still too bright then, darken the vertex colors directly in the LOD model from full white to a grey scale to control individual brightness per LOD model.
You can use SNIFF for that, for example replace full white FFFFFFFF with F0F0F0FF

  • Like 1
Link to comment
Share on other sites

Hello,

I finished a DynDOLOD run and an error came up just after the Summary of Messages opened.

Error message box:

Spoiler

[Window Title]
DynDOLOD

[Main Instruction]
Access violation at address 000000000126DB3E in module 'DynDOLODx64.exe'.

[Content]
Read of address 0000000000000000.

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[OK] [Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

After clicking OK, a Please Wait box showed for a few seconds of loading then the program saved its output (the esm etc.)

Here be my log files: https://mega.nz/folder/hPMkxBIA#srpHjV6hiEUnmRRVUytaOg

Edited by DWM19
spoilered error message correctly
Link to comment
Share on other sites

Hi,

I'm getting the following error message:  Access violation at address 0000000000E7DB3E in module 'DynDOLODx64.exe'. Read of address 0000000000000000.

But the esps and esm are generated and everything seems to be working.  The error pops up at the last minute.  I get the error with my full load order and without, and the error pops up after everything says it was generated okay. 

I'm running 1.5.97 (not downpatched) and DynDOLOD 3 Alpha-160 and Assets Alpha-47.  My logs are linked below.  The logs are without my full load order.

Thanks!

https://ufile.io/f/k0n87

 

Link to comment
Share on other sites

  • sheson changed the title to DynDOLOD 3.00 Alpha 161
7 hours ago, DWM19 said:

Hello,

I finished a DynDOLOD run and an error came up just after the Summary of Messages opened.

Error message box:

  Reveal hidden contents

After clicking OK, a Please Wait box showed for a few seconds of loading then the program saved its output (the esm etc.)

Here be my log files: https://mega.nz/folder/hPMkxBIA#srpHjV6hiEUnmRRVUytaOg

This should be fixed in Alpha-161

https://dyndolod.info
Always use the latest version.

https://dyndolod.info/Installation-Instructions
Use 7-Zip to unpack the DynDOLOD Standalone archive into a new and empty 'DynDOLOD' directory that is outside of special OS folders like 'Programs Files' or 'Program Files (x86)', User, Documents, Desktop, Download and also not in SteamApps, game, Data or any mod manager folders. For example C:\Modding\DynDOLOD\.

https://dyndolod.info/Updating#New-DynDOLOD-Version

Link to comment
Share on other sites

6 hours ago, slanglois said:

Hi,

I'm getting the following error message: Access violation at address 0000000000E7DB3E in module 'DynDOLODx64.exe'. Read of address 0000000000000000.

But the esps and esm are generated and everything seems to be working. The error pops up at the last minute. I get the error with my full load order and without, and the error pops up after everything says it was generated okay.

I'm running 1.5.97 (not downpatched) and DynDOLOD 3 Alpha-160 and Assets Alpha-47.  My logs are linked below.  The logs are without my full load order.

Thanks!

https://ufile.io/f/k0n87

This should be fixed in Alpha-161

https://dyndolod.info/Generation-Instructions#2-Generate-The-LOD-Mod-with-DynDOLOD
Pay attention to all log messages. It should end with the log message 'DynDOLOD plugins generated successfully' and lines like 'LODGen generated object LOD for [WORLDSPACE] successfully' for each selected worldspace. Do not use the output if there were errors that stopped the process prematurely.

The message missing from the log means one or more plugins are incomplete.

Link to comment
Share on other sites

I think something has borked with my last generation with DynDOLOD 161.
I went via coc whiterunexterior16 from main menu in the game, same result if I do coc riverwood and walk straight to whiterun by foot.
I only can see stuff which is near to my character and the far away (fargid?) lod. Trees for example aren't present, only when I get closer the full models are loading, only billboards are in distance.
As you can see on the screenshots further down, first the whiterun castle lod is viewable, if I get closer it vanishes (no step in between) and only If I get close enough the full models are loading.
You can also see that there is no difference if LOD is active or not (tll command).
Can't tell what happened here, everything looked fine during generation.

Here are the logs

Here are some screenshots:

https://ibb.co/0BsxnQV

https://ibb.co/267MjVw

https://ibb.co/qkwQcs1

https://ibb.co/4mPR2pC

https://ibb.co/xSpfsGd

https://ibb.co/wyhM20g

https://ibb.co/F6Yr8vR

https://ibb.co/mcTbTbx

https://ibb.co/DtZzdR3

https://ibb.co/0Dk3m16

And this is just an example. I had no (critical) errors during generation nor any crashes. Or do I have to start a new game to get everything to work correctly? In the past it worked even if you coc from main menu.
Oh and is it correct, that the some points from the MCM are missing e.g. where you set 'NetImmerse Override' on/off? Haven't read anything regarding this in the changelog.
https://ibb.co/brBLH9W

https://ibb.co/cr5HBR9

https://ibb.co/Y7kV14q

Edited by PRieST
Link to comment
Share on other sites

49 minutes ago, PRieST said:

I think something has borked with my last generation with DynDOLOD 161.
I went via coc whiterunexterior16 from main menu in the game, same result if I do coc riverwood and walk straight to whiterun by foot.
I only can see stuff which is near to my character and the far away (fargid?) lod. Trees for example aren't present, only when I get closer the full models are loading, only billboards are in distance.
As you can see on the screenshots further down, first the whiterun castle lod is viewable, if I get closer it vanishes (no step in between) and only If I get close enough the full models are loading.
You can also see that there is no difference if LOD is active or not (tll command).
Can't tell what happened here, everything looked fine during generation.

Here are the logs

Here are some screenshots:

https://ibb.co/0BsxnQV

https://ibb.co/267MjVw

https://ibb.co/qkwQcs1

https://ibb.co/4mPR2pC

https://ibb.co/xSpfsGd

https://ibb.co/wyhM20g

https://ibb.co/F6Yr8vR

https://ibb.co/mcTbTbx

https://ibb.co/DtZzdR3

https://ibb.co/0Dk3m16

And this is just an example. I had no (critical) errors during generation nor any crashes. Or do I have to start a new game to get everything to work correctly? In the past it worked even if you coc from main menu.
Oh and is it correct, that the some points from the MCM are missing e.g. where you set 'NetImmerse Override' on/off? Haven't read anything regarding this in the changelog.
https://ibb.co/brBLH9W

https://ibb.co/cr5HBR9

https://ibb.co/Y7kV14q

It seems none of the three reasons given at https://dyndolod.info/FAQ#Entire-LOD-missing apply.

Check what happens if you disable Occlusion.esp. If that makes no difference something probably happened to the LOD level 4 files or the engine loading them. Test with default INIs.

The MCM is a bit different for the large reference bugs workarounds, or rather for the dynamic LOD being done by DynDOLOD DLL NG.

Unrelated, but what is this supposed to be doing?
<Warning: Large references found in non master plugin LargeRefResolution.esp RiftenWorld "Rifton" [WRLD:00016BB4]>

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.