Jump to content

DynDOLOD 3.00 Alpha 180


sheson

Recommended Posts

57 minutes ago, Admiral30 said:

I already mentioned what full models are - FXWaterfallBodyTall.nif, 000FC85E

Log:https://ufile.io/qqplcw7i

Dyndolod resources are overwritten by: particle patch for enb, skyrim 2020, .

At the moment I'm trying to figure it out with author of water for enb, but if it can actually be adjusted in dyndolod resources that would be nice.

Thanks for help.

Open console and click on a waterfall to show and report its reference form id. the base record 000FC85E is used by many references.

See https://dyndolod.info/Help/Load-Overwrite-Orders
DynDOLOD Resources also contains a few updated full models and textures to fix various minor issues. They should overwrite unofficial patches and Skyrim particle patch for ENB

Remove bright waterfall fix for enb - dyndolod addon. It should not be used with DynDOLOD 3.x
Then generate LOD again, with the default mesh rules to see if the problems is fixed.

There is not really any use discussing this with the author of Water for ENB since that mod does not contain any dynamic LOD models.

Link to comment
Share on other sites

26 minutes ago, sheson said:

Open console and click on a waterfall to show and report its reference form id. the base record 000FC85E is used by many references.

See https://dyndolod.info/Help/Load-Overwrite-Orders
DynDOLOD Resources also contains a few updated full models and textures to fix various minor issues. They should overwrite unofficial patches and Skyrim particle patch for ENB

Remove bright waterfall fix for enb - dyndolod addon. It should not be used with DynDOLOD 3.x
Then generate LOD again, with the default mesh rules to see if the problems is fixed.

There is not really any use discussing this with the author of Water for ENB since that mod does not contain any dynamic LOD models.

All waterfalls are flickering, so I imagine all references are "broken", but here is the example from video:

Screenshot-6.png

Ok incorrect load order might be the problem here. For me resources are on the very top, I will move them a little lower to overwrite patches.

You see I contacted water for enb because I suspected that his meshes are the reason why dyndolod generates incorrect lod. But at the same time I guess someone else would notice it too.
I will try to update the lod now. If I won't reply again it means its fixed. Thanks for help again.

Link to comment
Share on other sites

On 2/13/2022 at 12:59 AM, sheson said:

That is how is should work yes. Do not hesitate to ask more detailed question or PM me on Discord if something does not seem to work as explained and more in-depth discussion is needed.

It all worked out perfectly in the end with your help. :)
Every season has it's own tree lod.

RQ7I0Ky.pngylh1MMI.png7w4xjd4.png

Link to comment
Share on other sites

Hi, any reasons as to why there are black boxes in the grass lod?,  I've already rerun texgen, rebuilt atlas, and rerun dyndolod but these black boxes are still here, but when i use my old previously used texgen and dyndolod output files, there seems to be no problem and both of them use the same precached grass.

grass black box.png

Link to comment
Share on other sites

18 minutes ago, Adven221 said:

Hi, any reasons as to why there are black boxes in the grass lod?,  I've already rerun texgen, rebuilt atlas, and rerun dyndolod but these black boxes are still here, but when i use my old previously used texgen and dyndolod output files, there seems to be no problem and both of them use the same precached grass.

grass black box.png

Read the first post which log and debug log to upload when making posts.

Follow the suggestion of the first post to use search. https://stepmodifications.org/forum/topic/15606-dyndolod-300-alpha-73/page/225/?tab=comments#comment-256967 This was reported for Alpha--69 back then and fixed in Alpha-70.

Using the latest alpha version?

Link to comment
Share on other sites

Hi, thank you for this amazing software. I'm having a problem generating seasonal LOD for Seasons of Skyrim. The distant terrain isn't snowy in winter, even though my DynDoLOD settings seem to be correct. Any help would be greatly appreciated! Images of my settings and a screenshot of the problem are in the spoiler:


 

Spoiler

 

kVcwzM4.png

OyYB5Lo.jpg

 

 

 

 

Link to comment
Share on other sites

9 hours ago, sheson said:

Read the first post which log and debug log to upload when making posts.

Follow the suggestion of the first post to use search. https://stepmodifications.org/forum/topic/15606-dyndolod-300-alpha-73/page/225/?tab=comments#comment-256967 This was reported for Alpha--69 back then and fixed in Alpha-70.

Using the latest alpha version?

Thanks! i didn't know it was updated to Alpha 73 already.

Link to comment
Share on other sites

On 2/15/2022 at 9:35 AM, sheson said:

Read the first post of the DynDOLOD 3 Alpha thread where to make posts. I moved your post.

This problem has already been reported, discussed and fixed days ago.

Always use the latest version.

I have the same issue with version 69 alpha. I assume I am safe with the usual rules for updating DynDOLOD midgame. I have generated the json files again but this time with alpha-73 and I still don't have a whiterunWorld.json file. I assume it's not necessary if that's the case as I have followed the same troubleshooting steps as the used you were replying to and found that the file was simply never generated.

For whatever reason, I seem to crash when disabling dyndolod and then moving indoors and saving. Followed by disabling dyndolod (with occlusion) in mod organiser 2 and attempting to save again. Fortunately, if I have to restart, I wasn't too far in..

 

Link to comment
Share on other sites

11 hours ago, lordvomit said:

Hi, thank you for this amazing software. I'm having a problem generating seasonal LOD for Seasons of Skyrim. The distant terrain isn't snowy in winter, even though my DynDoLOD settings seem to be correct. Any help would be greatly appreciated! Images of my settings and a screenshot of the problem are in the spoiler:

https://dyndolod.info/Help/Seasons

In addition to DynDOLOD generating object, tree and dynamic LOD for seasons, also use xLODGen terrain LOD beta to generate terrain LOD meshes and textures for the different seasons.

https://dyndolod.info/Generation-Instructions

Typically generate terrain LOD meshes and textures with xLODGen before generating the LOD mod with DynDOLOD.

xLODGen can be found here https://stepmodifications.org/forum/topic/13451-xlodgen-terrain-lod-beta-90-for-fnv-fo3-fo4-fo4vr-tes5-sse-tes5vr-enderal-enderalse/

Link to comment
Share on other sites

4 hours ago, tcoblack said:

I have the same issue with version 69 alpha. I assume I am safe with the usual rules for updating DynDOLOD midgame. I have generated the json files again but this time with alpha-73 and I still don't have a whiterunWorld.json file. I assume it's not necessary if that's the case as I have followed the same troubleshooting steps as the used you were replying to and found that the file was simply never generated.

For whatever reason, I seem to crash when disabling dyndolod and then moving indoors and saving. Followed by disabling dyndolod (with occlusion) in mod organiser 2 and attempting to save again. Fortunately, if I have to restart, I wasn't too far in..

There are no data files for child worldspaces that use the parent worldspace Tamriel for LOD.

It is not really clear when the CTD happens. It sounds like the CTD happens with no DynDOLOD in the load order... which means it would be caused by something unrelated.

Read the FAQ DynDOLOD Game Questions / ILS or CTD.

Read the ..\DynDOLOD\docs\DynDOLOD-README.txt which explains how to troubleshoot. A crash log is often the best option to determine the cause. Post it if help is required with troubleshooting.

Check the log and the summary for error and warning messages.

Read the first post which log and debug log to upload when making posts.

Link to comment
Share on other sites

Oh God, I can't run dyndolod anymore. I implemented seasons in my load order but Dyndolod fails and crash eating all my 32Gb of Ram with 4 lodgen generation simultanously

(one per season I assume) . I tried messing up with LODGenThreadSplit but didn't helped.

How can I build one lod at time to not overload my system?

Thank you 

bugreport.txt

Edited by manguz
Link to comment
Share on other sites

40 minutes ago, manguz said:

Oh God, I can't run dyndolod anymore. I implemented seasons in my load order but Dyndolod fails and crash eating all my 32Gb of Ram with 4 lodgen generation simultanously

(one per season I assume) . I tried messing up with LODGenThreadSplit but didn't helped.

How can I build one lod at time to not overload my system?

Thank you 

bugreport.txt 89.36 kB · 1 download

Read the first post which log and debug log to upload when making posts.

The bugreport.txt shows there is a problem while resizing an image. It shows DynDOLOD uses 6,58GB of memory.
Use sensible resolution settings for textures in TexGen and DynDOLOD.

Whatever the separate LODGen processes do should be irrelevant.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.