DynDOLOD 3.00 Alpha 190

[sheson]

  On 11/10/2023 at 8:35 PM, omronhe said:

DBM MuseumBuilding went missing while I loaded dyndolod, I checked DynDOLOD_SSE_log there are several relevant lines as follows:

[00:37] <Warning: File not found textures\odyssey\od1\balfiera\niko\pantheons\aedricseries\y'ffre\stainedglass\esoy'ffrestainedglass_n.dds. Used by Meshes\dbm resources\architecture\newmuseum\museumexterior.nif LegacyoftheDragonborn.esm DBM_MuseumBuilding [STAT:108D4B2F]>
[00:39] <Warning: Root block is NiNode in Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>
[00:39] <Warning: Filename textures\architecture\solitude\sstonestep01.dds does not adhere to file naming conventions. Used by Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>

but I had yet no clue how to fix it, any suggestions will be appreciated

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of the missing full model with more informative console.

[fractalbase]

Hi, I recently tried generating  DynDOLOD, and DynDOLOD seems to crash without a bug report before prompting that generation is complete and should the 3 plugins be generated.  Looking at the output folder, all the loose files appear to be there.  The logs that I happen to have (https://drive.google.com/drive/folders/18Hw-2mZiFWUgP4rL76fVupr-6SWAAqJe?usp=sharing) are from the previous run of DynDOLOD where future progress was halted because DynDOLOD detected an enabled plugin with a certain error that should be fixed.

Log files like bugreport.txt weren't generated.  Any ideas?

[omronhe]

 

  On 11/10/2023 at 9:43 PM, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of the missing full model with more informative console.

Expand  

here is the screenshot without dyndolod,

and the logs

https://drive.google.com/file/d/1aDeet7--_6MzM5XPW0myL91WB31Czohl/view?usp=sharing

[sheson]

  On 11/11/2023 at 6:22 AM, fractalbase said:

Hi, I recently tried generating  DynDOLOD, and DynDOLOD seems to crash without a bug report before prompting that generation is complete and should the 3 plugins be generated.  Looking at the output folder, all the loose files appear to be there.  The logs that I happen to have (https://drive.google.com/drive/folders/18Hw-2mZiFWUgP4rL76fVupr-6SWAAqJe?usp=sharing) are from the previous run of DynDOLOD where future progress was halted because DynDOLOD detected an enabled plugin with a certain error that should be fixed.

Log files like bugreport.txt weren't generated.  Any ideas?

Expand  

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs how to enable real time logs and to check the windows event log in case the program is being terminated by the OS before it can write its logs.

[sheson]

  On 11/11/2023 at 7:42 AM, omronhe said:

 

here is the screenshot without dyndolod,

and the logs

https://drive.google.com/file/d/1aDeet7--_6MzM5XPW0myL91WB31Czohl/view?usp=sharing

Expand  

When using the Advanced/Expert mode, make sure to click Medium (or Low, High) to load the mesh mask / reference rules for LOTD.

When you scroll down the rules you should see 3 rules with the plugin name, the first one should be legacyofthedragonborn.esm;0076B865 that sets all LOD levels and Grid to None.

Generating the LOD patch with the rules in place, you should then see the museum in the Tamriel worldspace, too.

[fractalbase]

>  Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs how to enable real time logs

will do.

> and to check the windows event log in case the program is being terminated by the OS before it can write its logs.

found a weird windows app log error:

Faulting application name: DynDOLODx64.exe, version: 3.0.0.156, time stamp: 0x654bc75a
Faulting module name: TAGTUN~2.DLL, version: 1.0.61187.35881, time stamp: 0x4ed3cb33
Exception code: 0xc0000005
Fault offset: 0x000000000000ff58
Faulting process id: 0x0x12CAC
Faulting application start time: 0x0x1DA145B5B161450
Faulting application path: D:\Tools\DynDOLOD\DynDOLODx64.exe
Faulting module path: C:\PROGRA~2\TagTuner\TAGTUN~2.DLL
Report Id: e12fb842-5744-43ad-8517-63016529a1c1
Faulting package full name: 
Faulting package-relative application ID: 

unfortunately I have no idea why dyndolod exe would somehow interact  with a dll for a mp3 tag editing utility.  I have Dyndolod located on my D:\Tools drive/folder, and tag tuner 2 is located in C:\Program Files (x86)\  --> any suggestions from that info?

[Abendaron]

Hi,

First of all, I'm back to Skyrim and it's amazing to see how DynDOLOD/TexGen has improved over the years!

I encountered a behavior I couldn't explain: https://imgur.com/a/rc5ClF5 (first picture taken with the tfc command)
Some buildings, here in Solitude, have both their lod and full model loaded. You can see it on the pic as I set the LOD atlas resolution to 16x16.
Also "tll" command effectively disable lod for the building.

It looks like a Large Reference Bug, but only affecting some buildings in the cell (for example, for the blue palace, the full model is used without the bug).

I did the test without any other plugins. Disabling DynDOLOD esm and esp solved the problem.
Only "Object Lod" was checked for the generation (no parent > child or other options)

I think it's usually hard to see as in this case, both lod and full model use the same low poly mesh in vanilla Skyrim, but when using regular one (like in the second pic) it's more noticeable.

I will continue my testing to see if I can isolate the root cause.

[sheson]

  On 11/11/2023 at 3:03 PM, fractalbase said:

>  Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs how to enable real time logs

will do.

> and to check the windows event log in case the program is being terminated by the OS before it can write its logs.

found a weird windows app log error:

Faulting application name: DynDOLODx64.exe, version: 3.0.0.156, time stamp: 0x654bc75a
Faulting module name: TAGTUN~2.DLL, version: 1.0.61187.35881, time stamp: 0x4ed3cb33
Exception code: 0xc0000005
Fault offset: 0x000000000000ff58
Faulting process id: 0x0x12CAC
Faulting application start time: 0x0x1DA145B5B161450
Faulting application path: D:\Tools\DynDOLOD\DynDOLODx64.exe
Faulting module path: C:\PROGRA~2\TagTuner\TAGTUN~2.DLL
Report Id: e12fb842-5744-43ad-8517-63016529a1c1
Faulting package full name: 
Faulting package-relative application ID: 

unfortunately I have no idea why dyndolod exe would somehow interact  with a dll for a mp3 tag editing utility.  I have Dyndolod located on my D:\Tools drive/folder, and tag tuner 2 is located in C:\Program Files (x86)\  --> any suggestions from that info?

Expand  

Why do you believe it is DynDOLOD interacting with TagTuner and not the other way around?
This might be a memory issue.
Is this repeatable? If that is the case, do not run TagTuner or any related background services/processes.

See https://dyndolod.info/FAQ#Object-LOD-model-and-full-model-show-at-the-same-time-causing-texture-flicker and https://dyndolod.info/FAQ#Object-LOD-shows-in-active-exterior-cells

[sheson]

  On 11/11/2023 at 3:04 PM, Abendaron said:

Hi,

First of all, I'm back to Skyrim and it's amazing to see how DynDOLOD/TexGen has improved over the years!

I encountered a behavior I couldn't explain: https://imgur.com/a/rc5ClF5 (first picture taken with the tfc command)
Some buildings, here in Solitude, have both their lod and full model loaded. You can see it on the pic as I set the LOD atlas resolution to 16x16.
Also "tll" command effectively disable lod for the building.

It looks like a Large Reference Bug, but only affecting some buildings in the cell (for example, for the blue palace, the full model is used without the bug).

I did the test without any other plugins. Disabling DynDOLOD esm and esp solved the problem.
Only "Object Lod" was checked for the generation (no parent > child or other options)

I think it's usually hard to see as in this case, both lod and full model use the same low poly mesh in vanilla Skyrim, but when using regular one (like in the second pic) it's more noticeable.

I will continue my testing to see if I can isolate the root cause.

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of full models with more informative console.

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#Object-LOD-model-and-full-model-show-at-the-same-time-causing-texture-flicker and https://dyndolod.info/FAQ#Object-LOD-shows-in-active-exterior-cells

DynDOLOD plugins typically do not trigger large reference bugs, but fixes them if possible. However for that to work fully, dynamic LOD needs to be generated. https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds

[fractalbase]

  On 11/11/2023 at 3:40 PM, sheson said:

Why do you believe it is DynDOLOD interacting with TagTuner and not the other way around?
This might be a memory issue.
Is this repeatable? If that is the case, do not run TagTuner or any related background services/processes.

See https://dyndolod.info/FAQ#Object-LOD-model-and-full-model-show-at-the-same-time-causing-texture-flicker and https://dyndolod.info/FAQ#Object-LOD-shows-in-active-exterior-cells

Expand  

my apologies, I didn't mean to imply that the fault was with DynDOLOD.

Yes, this is repeatable.

I will uninstall the referenced program TagTuner  and try dyndolod generation again after carefully reviewing the links you provided.

[sheson]

  On 11/11/2023 at 4:03 PM, fractalbase said:

my apologies, I didn't mean to imply that the fault was with DynDOLOD.

Yes, this is repeatable.

I will uninstall the referenced program TagTuner  and try dyndolod generation again after carefully reviewing the links you provided.

Expand  

Never mind the links to the FAQ, they were meant for another user.

[User77111]

sheson,

I am developing a skyrim overhaul and will be using dyndolod 3. I am beyond impressed with how the program functions although I have a few issues I would like to report on.

I am using skyrim 3d trees + the 3d LODs included on the skyrim 3d trees mod page. 

When generating 3d tree LOD with the latest version of xLODgen the LOD tree branches look like this:

When generating 3d tree LOD with the latest version of DynDOLOD 3.0 the LOD tree branches look like this:

It adds an outline to the leaf textures when using DynDOLOD. 

 

Also getting this issue with skyrim 3d trees as well when using DynDOLOD, and not when using 3d tree LOD generation on xLODGen:

https://imgur.com/a/cTsPoSH

This happens for only one tree snow model. s3dtrees_treepineforestsnow04.nif

 

Also when using a new save on DynDOLOD 3.0 I get this issue in the distant terrain in Solstheim:

https://imgur.com/a/CUzbUZb

You can see there are black lines in the distant terrain that disappear when you are closer to them. Sometime this bug not present on older saves. 

 

One more thing. I used LOD32 generation on the world map and was wondering how to change the brightness of the snow textures on these objects:

 

Here are all my log files: https://drive.google.com/file/d/1cZTr6s83idVRMZpVZBhxrwDsHHYtmjy_/view?usp=sharing

[sheson]

  On 11/13/2023 at 11:07 AM, User77111 said:

sheson,

I am developing a skyrim overhaul and will be using dyndolod 3. I am beyond impressed with how the program functions although I have a few issues I would like to report on.

I am using skyrim 3d trees + the 3d LODs included on the skyrim 3d trees mod page. 

When generating 3d tree LOD with the latest version of xLODgen the LOD tree branches look like this:

When generating 3d tree LOD with the latest version of DynDOLOD 3.0 the LOD tree branches look like this:

It adds an outline to the leaf textures when using DynDOLOD. 

 

Also getting this issue with skyrim 3d trees as well when using DynDOLOD, and not when using 3d tree LOD generation on xLODGen:

https://imgur.com/a/cTsPoSH

This happens for only one tree snow model. s3dtrees_treepineforestsnow04.nif

 

Also when using a new save on DynDOLOD 3.0 I get this issue in the distant terrain in Solstheim:

https://imgur.com/a/CUzbUZb

You can see there are black lines in the distant terrain that disappear when you are closer to them. Sometime this bug not present on older saves. 

 

One more thing. I used LOD32 generation on the world map and was wondering how to change the brightness of the snow textures on these objects:

 

Here are all my log files: https://drive.google.com/file/d/1cZTr6s83idVRMZpVZBhxrwDsHHYtmjy_/view?usp=sharing

Expand  

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of the tree full model(s) for the affect trees shown in the screenshots with more informative console.

https://dyndolod.info/Messages/Wrong-Billboard-Path Remove the wrong billboards. Do not install any 3rd party billboards. It probably won't affect anything regarding the 3D tree LODs.

Regarding the terrain in Solstheim, lower the underside or increase its quality in the advanced options https://dyndolod.info/Help/Advanced-Mode#Terrain-Underside or increase terrain LOD distance https://dyndolod.info/Help/Mod-Configuration-Menu#Settings

Regarding snow on the map, see https://dyndolod.info/Help/Snow-Ash-LOD-Shader#Map

https://dyndolod.info/Messages/Textures-Do-Not-Match Remove the outdated LOD models for DynDOLOD 2.x. For example rockcliff01rocks_lod_1.nif , rockpilel04cobble_lod_0.nif, tundrastreamend01yellow_lod_0.nif etc.
https://dyndolod.info/Messages/Deleted-Reference Clean all plugins that have deleted references.
Consider using https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds if using plugins that are visually incompatible with the large reference feature of Skyrim Special Edition.

[User77111]

Removed the old tree billboards and will try again. Thanks!

Btw, should we still be using HD LOD Textures SE? https://www.nexusmods.com/skyrimspecialedition/mods/3333

[User77111]

And as for Large Reference Bugs Workarounds, the requirement is to have the plugins cleaned. Unfortunately this wont be possible for others downloading the nexus collections due to permissions issues. If I were to clean the plugins and generate DynDOLOD using Large Reference Bugs Workarounds, but the reinstall the uncleaned plugins afterwards, would I run into issues?