DynDOLOD 3.00 Alpha 190

[sheson]

  On 8/17/2023 at 3:14 PM, ks182 said:

hello, I use DLL NG Alpha-9, every time I load a save in the upper left corner I get notifications "DynDOLOD" and "DynDOLOD successfully initialized". not just once, but constantly, at each boot. is it possible to disable this somehow?

Expand  

Get DynDOLOD DLL NG and Scripts 3.0 Alpha-10

[ks182]

  On 8/17/2023 at 3:44 PM, sheson said:

Get DynDOLOD DLL NG and Scripts 3.0 Alpha-10

Expand  

Thank you very much)

[sheson]

  On 8/17/2023 at 2:28 PM, Blackread said:

I noticed that some dock corner pieces are rotated 90 degrees clockwise in the LOD, despite the lod and full model meshes being perfectly aligned. Here are pictures of one example:

Caption for the pictures in their order of appearance:
1. The dock copy as seen in the child worldspace (SolitudeWorld)
2. The dock LOD as seen in the child worldspace
3. The original dock as seen in the parent worldspace (Tamriel)
4. The dock LOD as seen in the parent worldspace

EDID of the dock copy: skyrimesm_01991F_SolitudeWorld_DynDOLOD_PARENT_DynDOLOD_NOLOD

Logs: https://mega.nz/file/8adAyAyb#MD_N7VeQYpMyLxIRf2nGm5IlU-2YVMgbRBro4r2kWY4

The full model dock is from Static Mesh Improvement Mod, and the LOD model is from DynDOLOD Resources SE.

Expand  

Will be fixed next alpha version of DynDOLOD Resources.

[Mousetick]

About https://dyndolod.info/Help/Child-Parent-Worldspace-Copies

  Quote

Specific Reference Matching

If the same reference is listed for both, it means it does not have a match in the other worldspace but should also be ignored for copying.

In case a mod requires manual additions to specifically match references or to ignore them for copying, make a post on the official DynDOLOD support forum so the data can be added for all users in a future update.

Expand  

• Does this mean ..\DynDOLOD\Edit Scripts\DynDOLOD\Configs\DynDOLOD_[GAME MODE]_ChildworldMatches.txt is off-limit to end-users?
• How should an end-user proceed to exclude specific references from copying without requesting an official update, which may not be applicable to all users?

Thank you.

[sheson]

  On 8/17/2023 at 6:10 PM, Mousetick said:

About https://dyndolod.info/Help/Child-Parent-Worldspace-Copies

• Does this mean ..\DynDOLOD\Edit Scripts\DynDOLOD\Configs\DynDOLOD_[GAME MODE]_ChildworldMatches.txt is off-limit to end-users?
• How should an end-user proceed to exclude specific references from copying without requesting an official update, which may not be applicable to all users?

Thank you.

Expand  

Users who do not want to edit the configuration file themselves can post on the official DynDOLOD support forum with logs and useful screenshots, thus help improve the tools for everyone and themselves with the next update.

Users who can edit the configuration file with the help of the explanations can at the same time post the edits to the official DynDOLOD support forum to help improve the tools for everyone without having to wait for the update to be released. Once they install the new version, the changes are included and they won't have to remember to edit the configuration file again.

[Blackread]

  On 8/17/2023 at 3:23 PM, sheson said:

I am going to answer to each thing in a separate posts. If there is something I haven'r replied to in say a week (and it is still present after any updates that I might release in the meantime) feel free to post a reminder for that particular issue.

So far the hide quad flag was only used for terrain under side generation. Get xLODGen beta 99 that now has a corresponding check box for LOD level 4.
Unless the hidden quads are properly covered by LOD objects, the holes might become very visible. That is probably one of the reassons CK doesn't do it for terrain LOD generation.
Hence disabled by default. If you know the exact filename of the terrain LOD mesh, just use Specific Chunk: 4, -44, 0 for example.

Expand  

Thank you I got the terrain LOD to work now. However, the underside is still in the way. For some reason it looks like I'm getting a hole in the cell -43, -1 where I hid quads 3 and 4, but not in the cell -43, 0 where I hid quads 1,2,3 and 4.

First picture is from inside the mine tunnel, looking towards Markarth. The last picture is from under the terrain. The black tube is the mine tunnel, which pierces the underside. The gap in the underside is visible above it.

Logs and the plugin I used to hide the terrain. It was placed dead last in my load order while generating, so shouldn't be overwritten by anything. https://mega.nz/file/RG1mAbKC#4dlXjUlkrZkNXjB_JcCYHyl3sF8TO3-MkbMMJBKOvzE

[sheson]

  On 8/17/2023 at 6:35 PM, Blackread said:

Thank you I got the terrain LOD to work now. However, the underside is still in the way. For some reason it looks like I'm getting a hole in the cell -43, -1 where I hid quads 3 and 4, but not in the cell -43, 0 where I hid quads 1,2,3 and 4.

First picture is from inside the mine tunnel, looking towards Markarth. The last picture is from under the terrain. The black tube is the mine tunnel, which pierces the underside. The gap in the underside is visible above it.

Logs and the plugin I used to hide the terrain. It was placed dead last in my load order while generating, so shouldn't be overwritten by anything. https://mega.nz/file/RG1mAbKC#4dlXjUlkrZkNXjB_JcCYHyl3sF8TO3-MkbMMJBKOvzE

Expand  

Upload the terrain BTR and the underside NIF.

[teadude]

Hi. i get this error when i am trying to update my occlusion.esp through dyndolod.

[Window Title]
DynDOLOD

[Main Instruction]
Error: Duplicate editor ID in DynDOLOD.esm [CELL:15025E93] (in WindhelmWorld "Windhelm" [WRLD:0001691D] at 26,7) and DynDOLOD.esm [CELL:15025A57] (in WhiterunWorld "Whiterun" [WRLD:0001A26F] at 8,-6)

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

these were the only logs that were generated

Logs.zipFetching info...

[sheson]

  On 8/17/2023 at 7:27 PM, teadude said:

Hi. i get this error when i am trying to update my occlusion.esp through dyndolod.

[Window Title]
DynDOLOD

[Main Instruction]
Error: Duplicate editor ID in DynDOLOD.esm [CELL:15025E93] (in WindhelmWorld "Windhelm" [WRLD:0001691D] at 26,7) and DynDOLOD.esm [CELL:15025A57] (in WhiterunWorld "Whiterun" [WRLD:0001A26F] at 8,-6)

[Content]

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[Exit DynDOLOD]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

these were the only logs that were generated

Logs.zip 663.61 kB · 0 downloads

Expand  

The DynDOLOD plugins were generated with an outdated version of DynDOLOD 3 Alpha.

Get the latest DynDOLOD 3 Alpha.
Generate new DynDOLOD, Occlusion plugins from scratch and install them.
Backup the debug log from that generation.
Then try to update Occlusion.esp to see if a duplicate EditorID error still happens.
If that is the case upload the debug log you backed up and the DynDOLOD plugin mentioned in the message.

[teadude]

  On 8/17/2023 at 7:50 PM, sheson said:

The DynDOLOD plugins were generated with an outdated version of DynDOLOD 3 Alpha.

Get the latest DynDOLOD 3 Alpha.
Generate new DynDOLOD, Occlusion plugins from scratch and install them.
Backup the debug log from that generation.
Then try to update Occlusion.esp to see if a duplicate EditorID error still happens.
If that is the case upload the debug log you backed up and the DynDOLOD plugin mentioned in the message.

Expand  

would i have to start a new playthrough when doing this? or can i continue playing mid save? would i have to follow the clean save method?

[sheson]

  On 8/17/2023 at 8:02 PM, teadude said:

would i have to start a new playthrough when doing this? or can i continue playing mid save? would i have to follow the clean save method?

Expand  

There is not need for a new game. Just a clean save.

See https://dyndolod.info/Updating and https://dyndolod.info/Updating

[PRieST]

  On 8/15/2023 at 5:07 PM, sheson said:

I added export of the native terrain height data to a texture/image for doodlum for a test. It is also part of not yet released xLODGen terrain LOD beta.

The readme has a bit of information.

Terrain-Heightmap-Readme.txt 1.41 kB · 6 downloads

Expand  

So, to get this right: This is just for a (future/maybe) mod release from doodlum and not really needed for any (new) functionality of DynDOLOD, right? Or with other words - if I activate this setting I'll see no difference, because the heightmap alone doesn't do anything?

[Blackread]

  On 8/17/2023 at 6:44 PM, sheson said:

Upload the terrain BTR and the underside NIF.

Expand  

Here: https://mega.nz/file/NGtgRJDb#6_qQlqMbMp98j0O2zmDZJV_s844_1KJenJmBXxVccHA

I only included the Tamriel.4.-44.0 and Tamriel.4.-44.-4 blocks, I assumed you didn't want the whole of Tamriel.

Edited August 17, 2023 by Blackread

[sheson]

  On 8/17/2023 at 8:55 PM, PRieST said:

So, to get this right: This is just for a (future/maybe) mod release from doodlum and not really needed for any (new) functionality of DynDOLOD, right? Or with other words - if I activate this setting I'll see no difference, because the heightmap alone doesn't do anything?

Expand  

The terrain heightmap is a modders resources that by itself doesn't do anything. The INI setting is just exposing an option in xLODGen.

[PRieST]

  On 8/18/2023 at 4:35 AM, sheson said:

The terrain heightmap is a modders resources that by itself doesn't do anything. The INI setting is just exposing an option in xLODGen.

Expand  

Thank you for the clarification.