DynDOLOD 3.00 Alpha 182

[KyroDragon]

12 minutes ago, sheson said:

What happens if you run TexConvx64.exe from a command prompt?

For me, nothing that I can see. Launching it from a file manager such as total commander I can see a window open and close very quickly. However, it should be noted that if I launch texgen64 itself manually through total commander it opens up as expected but of course can't access the MO2 VFS, though perhaps it can give a clue as to what is going on here.

Edit:

I have repaired vc++ and taken the other steps in the linked guide with no effect.

Edited October 8, 2023 by KyroDragon

[sheson]

1 hour ago, Althro said:

Getting a texconv error with the latest Alpha-153. Exclusions set in defender and running driver only on Nvidia. All are on latest updates.

Logs attached including windows event viewer.

DynDOLOD_SSE_Debug_log.txt 340.09 kB · 1 download DynDOLOD_SSE_log.txt 417.12 kB · 1 download

What happens if you run TexConvx64.exe from a command prompt?

https://dyndolod.info/Help/Texconv
Install, update or repair Microsoft Visual C++ Redistributable packages for Visual Studio 2015, 2017, 2019 and 2022.

https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist

[sheson]

1 hour ago, xcal68 said:

Getting error with 153:

 

[Window Title]
TexGen

[Main Instruction]
Executing Texconvx64.exe returned error code C0000005.

[Content]
"C:\Games\Skyrim Modding Tools\DynDOLOD\Edit Scripts\Texconvx64.exe"

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

 

I have gone through

 

The error does not happen in 152.

 

Logs can be found here: https://drive.google.com/file/d/1QQ49lreoIii-sMMVrcGttQzgKoLgKnuN/view?usp=sharing

What happens if you run TexConvx64.exe from a command prompt?

https://dyndolod.info/Help/Texconv
Install, update or repair Microsoft Visual C++ Redistributable packages for Visual Studio 2015, 2017, 2019 and 2022.
Make sure the OS, UAC, anti-vir or some other 3rd party crapware is not interfering.
Install the latest graphics driver only without any of the crapware.

https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist

[xcal68]

I get the UAC popup.  I click 'yes'.  Command window opens/closes quickly, since there's no work to do.

Edited October 8, 2023 by xcal68
Oops

[sasquatch678]

On 10/7/2023 at 3:32 AM, DarSkirata said:

Hey Sheson & community,

FIrst time using DynDOLOD 3.0 on latest AE with NG DLLs I ran into an issue with range check errors.

First off, all plugins identified by LOOT as dirty were cleaned, Treemod is Ulvenvald 3.1 with 3D Hybrid LoDs installed. TexGen ran normally and was installed normally, overwrite all. Among others I have USEEP, Lux, Lux Orbis, Lux Via, Water for ENB, and all their patches installed. Game was stable so far.

Whenever I run DynDOLOD, it stops after a few minutes with an Error: Range check error while processing [some plugin]. Sometimes it's Skyrim.esm, sometimes JK's Skyirm.esp, seemingly everytime it's a different object, marker, navpoint placed in a different cell causing the crash, like this:

Tried a couple of times by now, everytime it's a range check error, every time a different reason. Strange thing is, I checked all plugins for errors with SSEEdit, and these references are not errors.

These are my settings:
 

I've attached my regular log file to this message. The DynDOLOD_SSE_Debug_log.txt is 37MB big so it's uploaded with the bugreport.txt here: https://ufile.io/rb3c2efh

Any idea or help is appreciated. 

DynDOLOD_SSE_log.txt 909.8 kB · 1 download

I have this same error. It points to a new reference each time, but there is never any actual error in the plugin. My system is stable and I have no overclock. Dyndolod SSE Debug Log available here. https://ufile.io/u9llpuis bugreport.txt

Edited October 8, 2023 by sasquatch678

[sheson]

46 minutes ago, KyroDragon said:

Much like Althro and xcal68 I am running into the same issue with alpha 153:

or:

[Window Title]
TexGen

[Main Instruction]
Executing Texconvx64.exe returned error code C0000005.

[Content]
"D:\Games\_Modding\Skyrim\DynDOLOD\Edit Scripts\Texconvx64.exe"

Click on this link for additional explanations and help for this message

For qualified help and advice or to report a problem make a post on the official DynDOLOD support forum.

[Exit TexGen]

[Footer]
Online Help | Support Forum | Copy message to clipboard

The computer is running Windows 11 pro. I did not have this issue with alpha 152, though foolishly I didn't save a copy of it before updating.

Logs are here, though they don't contain much of value at a quick glance:

https://drive.google.com/file/d/1mQsuSbM2UbM3WYD-kikeLbYCWsmgVmhC/view?usp=sharing

https://drive.google.com/file/d/1iMPonSRGKkYtEBodG0y1U9Q2CqW8bCE2/view?usp=sharing

 

Do not post screens of messages.

https://dyndolod.info/Help/Texconv
Install, update or repair Microsoft Visual C++ Redistributable packages for Visual Studio 2015, 2017, 2019 and 2022.
Make sure the OS, UAC, anti-vir or some other 3rd party crapware is not interfering.
Install the latest graphics driver only without any of the crapware.

https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist

24 minutes ago, KyroDragon said:

For me, nothing that I can see. Launching it from a file manager such as total commander I can see a window open and close very quickly. However, it should be noted that if I launch texgen64 itself manually through total commander it opens up as expected but of course can't access the MO2 VFS, though perhaps it can give a clue as to what is going on here.

To test what happens running Texconvx64.exe on a command prompt, you should open the command prompt first.

If you believe there is an issue with MO2, then check its log(s) for clues.

[KyroDragon]

1 minute ago, sheson said:

Do not post screens of messages.

https://dyndolod.info/Help/Texconv
Install, update or repair Microsoft Visual C++ Redistributable packages for Visual Studio 2015, 2017, 2019 and 2022.
Make sure the OS, UAC, anti-vir or some other 3rd party crapware is not interfering.
Install the latest graphics driver only without any of the crapware.

https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist

To test what happens running Texconvx64.exe on a command prompt, you should open the command prompt first.

Apologies for the screen. 

I did run it from cmd.exe first, but nothing noticeable happens running either texconv.exe or texconvx64.exe.

[sheson]

14 minutes ago, KyroDragon said:

Apologies for the screen. 

I did run it from cmd.exe first, but nothing noticeable happens running either texconv.exe or texconvx64.exe.

Test what happens with this version https://mega.nz/file/EJg00YZR#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

[KyroDragon]

8 minutes ago, sheson said:

Test what happens with this version https://mega.nz/file/EJg00YZR#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

File can't be downloaded from that link for me. (No longer available)

[sheson]

5 minutes ago, KyroDragon said:

File can't be downloaded from that link for me. (No longer available)

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

[KyroDragon]

2 minutes ago, sheson said:

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

Bingo! Nothing from cmd.exe and just a window that opens and closes very quickly if I launch it from a graphical interface. However, texgenx64 now launches and runs as expected from MO2, so whatever you did seems to have solved the issue for me.

Big thumbs up for the quick help! 

[sheson]

1 minute ago, KyroDragon said:

Bingo! Nothing from cmd.exe and just a window that opens and closes very quickly if I launch it from a graphical interface. However, texgenx64 now launches and runs as expected from MO2, so whatever you did seems to have solved the issue for me.

Big thumbs up for the quick help! 

Thanks for letting us know.

[xcal68]

15 minutes ago, sheson said:

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

That seems to have resolved it for me, too.  It started up and I was able to move forward.  Running fine in the background as I type this.

 

Edit - Finished successfully.

Edited October 8, 2023 by xcal68
Update

[sheson]

49 minutes ago, sasquatch678 said:

I have this same error. It points to a new reference each time, but there is never any actual error in the plugin. My system is stable and I have no overclock. Dyndolod SSE Debug Log available here. https://ufile.io/u9llpuis bugreport.txt

This should be hopefully fixed in DynDOLOD 3 Alpha-154

[raging987inferno]

154 solved the problem