z929669 Posted February 11, 2023 Posted February 11, 2023 5 hours ago, SerhatCenk said: My dyndolod has been in the calculating occlusion phase for about 10 hours and the file size was constantly growing. Now the dyndolod output file has reached 39.5 gb but it is not increasing any more. There is no error or anything else. I did everything step by step as in the guide. I wonder what is the problem and how can I solve it? https://dyndolod.info/FAQ "Long running time or output several GB in file size" Please review the OP, too.
sheson Posted February 11, 2023 Author Posted February 11, 2023 13 hours ago, SerhatCenk said: My dyndolod has been in the calculating occlusion phase for about 10 hours and the file size was constantly growing. Now the dyndolod output file has reached 39.5 gb but it is not increasing any more. There is no error or anything else. I did everything step by step as in the guide. I wonder what is the problem and how can I solve it? You already asked this question and it was already answered above. Zero information was provided. Read the first post. If you have problems following a third party guide, then you need to ask the author of the guide or use its forum for help.
duuure Posted February 15, 2023 Posted February 15, 2023 Hello I had a similar problem before when i used HLT without 3d lods files, now its ulvenwald. It has no lod files and some reach trees look like this at distance: Album link because of file size limit My settings: All dyndo files are up to date. I did 3 generations but its still there. I dont know what to do.
z929669 Posted February 15, 2023 Posted February 15, 2023 1 hour ago, duuure said: Hello I had a similar problem before when i used HLT without 3d lods files, now its ulvenwald. It has no lod files and some reach trees look like this at distance: Album link because of file size limit My settings: All dyndo files are up to date. I did 3 generations but its still there. I dont know what to do. Not much can be done to help until you post your relevant logs as described in the parent forum and the DynDOLOD OP
sheson Posted February 15, 2023 Author Posted February 15, 2023 5 hours ago, duuure said: Hello I had a similar problem before when i used HLT without 3d lods files, now its ulvenwald. It has no lod files and some reach trees look like this at distance: Album link because of file size limit My settings: All dyndo files are up to date. I did 3 generations but its still there. I dont know what to do. Moved to the DynDOLOD 3 Alpha thread. Read the first post which log and debug log from TexGen and DynDOLOD to upload when making posts. https://dyndolod.info/Generation-Instructions Do not install any 3rd party tree LOD billboards. Use TexGen to generate all desired LOD billboards. https://dyndolod.info/Help/TexGen
sigi123 Posted February 16, 2023 Posted February 16, 2023 Hi Guys, i tried for weeks now to find a solution, but could not find one. After creating dynamic Lod with Dyndolod, i found a big hole in Dragons Reach in Whiterun. I also got constantly ctd when opening the map. Please see the attachments. Appreciate your help. crash-2023-02-15-21-14-58.log loadorder.txt
sheson Posted February 16, 2023 Author Posted February 16, 2023 1 hour ago, sigi123 said: Hi Guys, i tried for weeks now to find a solution, but could not find one. After creating dynamic Lod with Dyndolod, i found a big hole in Dragons Reach in Whiterun. I also got constantly ctd when opening the map. Please see the attachments. Appreciate your help. crash-2023-02-15-21-14-58.log 36.43 kB · 0 downloads loadorder.txt 41.38 kB · 0 downloads Read the first post which log and debug log to upload when making posts. Read https://dyndolod.info/Official-DynDOLOD-Support-Forum for explanations about posting screenshots. What troubleshooting have you done that makes you believe what is shown in the screenshot has something to do with the output DynDOLOD generated? Read https://dyndolod.info/Mods/Open-Cities-Skyrim What makes you believe the crash has something to do with the output DynDOLOD generated? Install the latest version of Crash Logger.
sigi123 Posted February 16, 2023 Posted February 16, 2023 (edited) Hi Sheson, thanks for your fast reply. I forgot to add, that when i disable Dyndolod, the hole is gone. For the crashlog i was not sure if it has something to do with Dyndolod. Anyways, would appreciate help for solving the ctd too. Update: One Log is too big to post (over 3 MB), even when i zip it. No idea... DynDOLOD_SSE_log.txt Edited February 16, 2023 by sigi123
sheson Posted February 16, 2023 Author Posted February 16, 2023 52 minutes ago, sigi123 said: Hi Sheson, thanks for your fast reply. I forgot to add, that when i disable Dyndolod, the hole is gone. For the crashlog i was not sure if it has something to do with Dyndolod. Anyways, would appreciate help for solving the ctd too. Update: One Log is too big to post (over 3 MB), even when i zip it. No idea... DynDOLOD_SSE_log.txt 1.17 MB · 1 download As explained on the first post, use a file or text sharing service to upload logfiles. The log only shows one LOD generation session. if you followed the linked instructions for open Cities Sktyim, there should be two session in the normal log, unless you deleted the log file after the first session. Provide useful screenshots as explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots, especially of the object that is missing.
sigi123 Posted February 16, 2023 Posted February 16, 2023 58 minutes ago, sheson said: As explained on the first post, use a file or text sharing service to upload logfiles. The log only shows one LOD generation session. if you followed the linked instructions for open Cities Sktyim, there should be two session in the normal log, unless you deleted the log file after the first session. Provide useful screenshots as explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots, especially of the object that is missing. Done: https://mega.nz/folder/JZxhVIhR#hFRqv7FTCnegSbmniyqMDA
sheson Posted February 16, 2023 Author Posted February 16, 2023 34 minutes ago, sigi123 said: Done: https://mega.nz/folder/JZxhVIhR#hFRqv7FTCnegSbmniyqMDA https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots When making screenshots of things in the game, open console and click the object in question to show its reference form ID. Use Mfg Console or More Informative Console to show additional information when opening the console and clicking an object. If making screenshots of objects missing with DynDOLOD output enabled, make a screenshot of the objects as explained above without DynDOLOD output enabled.
sigi123 Posted February 17, 2023 Posted February 17, 2023 On 2/16/2023 at 5:55 PM, sheson said: https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots When making screenshots of things in the game, open console and click the object in question to show its reference form ID. Use Mfg Console or More Informative Console to show additional information when opening the console and clicking an object. If making screenshots of objects missing with DynDOLOD output enabled, make a screenshot of the objects as explained above without DynDOLOD output enabled. https://mega.nz/file/NdIxVTqZ#DuAqvNcgugGqiVO8R3so_dg1w4Xxbc2lCAJyZ5F9AoM Check the pics, hope it helps
sheson Posted February 17, 2023 Author Posted February 17, 2023 48 minutes ago, sigi123 said: https://mega.nz/file/NdIxVTqZ#DuAqvNcgugGqiVO8R3so_dg1w4Xxbc2lCAJyZ5F9AoM Check the pics, hope it helps The screenshots do not seem to show the object that goes missing before DynDOLOD output is enabled? I suggest to really follow every step how to generate LOD for Open Cities explained at https://dyndolod.info/Mods/Open-Cities-Skyrim
NorthSide Posted February 18, 2023 Posted February 18, 2023 (edited) Hi all, I'm having a problem with grass LOD's not appearing in game. So I checked the "Grass LOD Troubleshooting Guide" and found what might be the culprit: Quote Troubleshooting Not all grass types have LOD / grass LOD billboards Check that TexGen generates grass LOD billboards for all desired grass types. Plugins from mods often forget to set object bounds on base records, which filters them out from automatic tree/grass LOD billboard generation. See TexGen Configuration for further details. There are entries in the TexGen debug log that look like this: Quote [00:31] [GetRequiredBillboards] <Debug: Ignoring Meshes\landscape\grass\fern_pale.nif bounds volume 121.938507080078, height 31 Grass FPS Booster.esp Fern_Pale [GRAS:15000824]> More complete listing: https://paste.ee/p/deo7j Are those instances of what the troublshooting guide terms "filtered out" or am I misinterpreting it? I also checked the output directory of TexGen and I could not find many of the grasses from my grass mod in there. I did create a recalulated bounds esp plugin for the grass records via xedit and ck for the grass caching process on older skyrim 1.5.97 but i disabled it before I ran TexGen and DynDOLOD, thinking it was unnecessary. Thought it was prudent to ask here before running it through again. Thanks. Edited February 18, 2023 by NorthSide
svien Posted February 18, 2023 Posted February 18, 2023 Alpha 112 gave this error when trying to run texgen Error: File not found textures\architecture\whiterun\WRStoneFloor02.dds. Used by D:\DynDOLOD\Edit Scripts\DynDOLOD\Render\Skyrim\Objects\lod\wrbuildingslod02.nif https://mega.nz/folder/DDh32aoI#ftTctv21suL-8vZuopYWmw
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now