DynDOLOD 3.00 Alpha 182

[MarkAim]

Would It be possible to get ALPHA 65 for testing Im getting a Range Error when running Dyndolod 64. Not sure what is causing it  was using ALPHA 67 TexGen 64 is working fine btw but not Dyndolod

Edited February 10, 2022 by MarkAim

[jwisser]

13 hours ago, aufisch said:

OK, thanks I am just trying to find out why my waterwheels are suddenly invisible (never happened before), and I only found DynDOLOD.esm overwriting them. But apparently there is something else wrong. I just can't figure it out as I have Renthals Waterwheel installed as loose files (both mesh and textures).

 

Would love to know if you find a solution to this. I ran into the same thing and wound up uninstalling Renthals because I couldn't find a fix.

[MarkAim]

1 hour ago, MarkAim said:

Would It be possible to get ALPHA 65 for testing Im getting a Range Error when running Dyndolod 64. Not sure what is causing it  was using ALPHA 67 TexGen 64 is working fine btw but not Dyndolod

Found the Range Check Error It was notice board.esp but that weird it never gave that issue in ALpha 65 Had to disable then run dyndolod

[Lance_geis]

Hello sheson,

since last update, texgen is bugged on my rig, bugreport.txt

Cant preview objects in the render windows.

[sheson]

9 hours ago, MarkAim said:

Would It be possible to get ALPHA 65 for testing Im getting a Range Error when running Dyndolod 64. Not sure what is causing it  was using ALPHA 67 TexGen 64 is working fine btw but not Dyndolod

Read the first post which log files and bugreport to upload.

7 hours ago, MarkAim said:

Found the Range Check Error It was notice board.esp but that weird it never gave that issue in ALpha 65 Had to disable then run dyndolod

The error is a problem in the code and not a plugin. That is why you should upload the log and bugreport.

Disabling a plugin is a troubleshooting step and not a fix. I have no issue when generating LOD with notice board.esp.

[sheson]

2 hours ago, Lance_geis said:

Hello sheson,

since last update, texgen is bugged on my rig, bugreport.txt

Cant preview objects in the render windows.

Also upload the log and debug log as explain on the first post.

[Jake0233]

Hello sheson,

It seems the lastest update bugged my TexGen. Whenever I load TexGen with my heavy load order, it loads normally, but it suddenly gives two error windows which display "Please wait a moment" which indicated an error has occurred. Afterwards, it loads normally, but I cannot see the preview of the objects in the render windows for some reasons and pops out the "Please wait a moment" window but no error message in the log. I able to run the program and it generated sucessfully but it lasted like 4 minutes since I was expected to last around 20 mins or so. I have my doubts since it may cause an error if I continue generating the LODs.

Here are my attached logs when I made that TexGen generation.

TexGen_SSE_Debug_log

bugreport.txt TexGen_SSE_log.txt

[Lance_geis]

my apology.bugreport.txt

TexGen_SSE_log.txtTexGen_SSE_Debug_log.txt

 

JAke0233 seems to have the exact same problem, i also have the window "please waits a moment"

Edited February 11, 2022 by Lance_geis

[guncai]

DynDOLOD 3.00-59721-Alpha-67
DynDOLOD Resources 3.00-108514-Alpha-20
Error:
[00:30] Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))
[00:30] Created a summary of log messages D:\DynDOLOD 3\Summary\DynDOLOD_Index.html.
Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))
Error: Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))

DynDOLOD_TES5_Debug_log： https://ufile.io/a5oa3xjp

Edited February 11, 2022 by guncai

[sheson]

1 hour ago, guncai said:

DynDOLOD 3.00-59721-Alpha-67
DynDOLOD Resources 3.00-108514-Alpha-20
Error:
[00:30] Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))
[00:30] Created a summary of log messages D:\DynDOLOD 3\Summary\DynDOLOD_Index.html.
Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))
Error: Integer overflow while processing [REFR:000F6717] (places RTChimney01 [STAT:000F03D7] in GRUP Cell Temporary Children of RiftenCitySouth [CELL:00042245] (in RiftenWorld "è￡?è°·???" [WRLD:00016BB4] at 42,-25))

DynDOLOD_TES5_Debug_log： https://ufile.io/a5oa3xjp

Upload bugreport.txt as explained on the first post.

[sheson]

1 hour ago, Jake0233 said:

Hello sheson,

It seems the lastest update bugged my TexGen. Whenever I load TexGen with my heavy load order, it loads normally, but it suddenly gives two error windows which display "Please wait a moment" which indicated an error has occurred. Afterwards, it loads normally, but I cannot see the preview of the objects in the render windows for some reasons and pops out the "Please wait a moment" window but no error message in the log. I able to run the program and it generated sucessfully but it lasted like 4 minutes since I was expected to last around 20 mins or so. I have my doubts since it may cause an error if I continue generating the LODs.

Here are my attached logs when I made that TexGen generation.

TexGen_SSE_Debug_log

bugreport.txt 82.65 kB · 2 downloads TexGen_SSE_log.txt 990.42 kB · 2 downloads

 

1 hour ago, Lance_geis said:

my apology.bugreport.txt

TexGen_SSE_log.txt 201.61 kB · 2 downloads TexGen_SSE_Debug_log.txt 663.36 kB · 1 download

 

JAke0233 seems to have the exact same problem, i also have the window "please waits a moment"

Download and test with this version of TexGen. In case there are still problems upload new bugreport and debug log.

The recent updates to TexGen improved speed, so it is expected to be faster.

Make sure to investigate and fix missing texture problems.

[Jake0233]

41 minutes ago, sheson said:

 

Download and test with this version of TexGen. In case there are still problems upload new bugreport and debug log.

The recent updates to TexGen improved speed, so it is expected to be faster.

Make sure to investigate and fix missing texture problems.

It worked as it's intended and the errors are gone. Thanks sheson.

[Jake0233]

1 hour ago, Jake0233 said:

It worked as it's intended and the errors are gone. Thanks sheson.

Disregard my earlier comment, it seems TexGen just crashed when I try to recreate again for testing purposes. When it crashed, it does not create a bugreport for some reason. The logs were generated at least.

TexGen_SSE_Debug_log.txt TexGen_SSE_log.txt

[Lance_geis]

Thankies sheson, it works as intended, no errors

Take my firstborn !

(looking at the previous post that spawned when i wrote this one, i'm also generating the textures to see if something happens )

the version works for me

Edit: it was so fast that i didnt had the time to close the browser, nice improvement !! no errors, everything is fine

Edited February 11, 2022 by Lance_geis

[Jake0233]

16 minutes ago, Jake0233 said:

Disregard my earlier comment, it seems TexGen just crashed when I try to recreate again for testing purposes. When it crashed, it does not create a bugreport for some reason. The logs were generated at least.

TexGen_SSE_Debug_log.txt 123.74 kB · 1 download TexGen_SSE_log.txt 123.62 kB · 1 download

After reinstalling DynDOLOD completely, it finally worked again and no crashes nor errors this time. Thanks again Sheson for the help.