Lexy's: Legacy of The Dragonborn Special Edition

[jcherrington]

Thank you for this impressive document.  I am working through my first pass at installing and have a question on step 56.4, [QUASIPC - Qwinn's Unified Automated Self Installing Patch Compendium].  Do I read correctly from the questions on page 583 and reply on page 584 that this step is no longer valid?  When I walk the FOMOD, the two patches that are the point of the step:

 

Other Complete Alchemy and Cooking Overhaul

 

 Patch for Complete Alchemy and Cooking Overhaul 2.0.1 + Interesting NPCs 3.4.2

 Patch for Complete Alchemy and Cooking Overhaul 2.0.1 + Relationship Dialogue Overhaul Final

 

...are not enabled and not select-able.  Checkpointing to ensure I did not overlook something in the instructions.  Thank you.

\

[DarkladyLexy]

So not sure what's up with relinker, the paths are right and it doesn't report any errors it just says:

 

I need to know Mod Organizer's root folder [E:\Mod Organizer 2 - Lexys LOTD SE]

--->

I need to know Mod Organizer's Mods folder [E:\Modding\MO2-SkyrimSE\mods]

--->

 

Alright, let's get started.

 

First, search the Mods folder for merged plugins.

  File "", line 222, in

  File "configparser.py", line 778, in get

  File "configparser.py", line 1138, in _unify_values

 

: No section: 'General'

Press Enter to exit...

 

But then the overwrite folder is empty.

 

I'll keep searching on google for similar cases

the normally happens for 2 reasons 1st your antivirus is blocking relinker and you need to exclude the program form it. 2nd your profile folder and mods folder are not in the same location as the rest of MO2 

 

Thank you for this impressive document.  I am working through my first pass at installing and have a question on step 56.4, [QUASIPC - Qwinn's Unified Automated Self Installing Patch Compendium].  Do I read correctly from the questions on page 583 and reply on page 584 that this step is no longer valid?  When I walk the FOMOD, the two patches that are the point of the step:

 

Other Complete Alchemy and Cooking Overhaul

 

 Patch for Complete Alchemy and Cooking Overhaul 2.0.1 + Interesting NPCs 3.4.2

 Patch for Complete Alchemy and Cooking Overhaul 2.0.1 + Relationship Dialogue Overhaul Final

 

...are not enabled and not select-able.  Checkpointing to ensure I did not overlook something in the instructions.  Thank you.

\

Those are the only two patches we need from the mod everything is covered by the various Conflict resolution Patches. You must have the masters active to installed them.

[rayhne]

So I cannot get Classic Classes and Birthsigns to appear. I've tried equipping spells, un-enquipping clothing and re-equipping them. Any thing else I can try?

Any suggestions at all?

[DarkladyLexy]

Any suggestions at all?

only reason i can think of for that is you don't have the esp active

[johnboy3434]

Any help on the disappearing neck stumps I mentioned last page? Here's my load order, if it helps, but it shouldn't be much different from any other Lexy LotD order.

[Indanger]

Firstly: thank you very much for this comprehensive and stable setup! I just reinstalled it after months absence and stumbled across a weird problem so far: I can not loot most corpses. I was able to loot chests and these ghost inside the abandoned prison but I am unable to so with skeletons, wildlife or humanoids so far. Is this a feature I just missed? 

Edited December 1, 2018 by Indanger

[rayhne]

only reason i can think of for that is you don't have the esp active

ClassicClasses.esp? Yes, it is active.

[Indanger]

Firstly: thank you very much for this comprehensive and stable setup! I just reinstalled it after months absence and stumbled across a weird problem so far: I can not loot most corpses. I was able to loot chests and these ghost inside the abandoned prison but I am unable to so with skeletons, wildlife or humanoids so far. Is this a feature I just missed? 

I'm getting somewhere ... I think. After reinstalling quick loot I am actually able to loot, but the loot windows just isnt there. So it cannot be an esp related problem, right? I need to check my interface mods.

 

Edit:

QuickLoot works fine now ... but I still can't search corpses (aka. loot the classic way). I'm still on it.

Edited December 2, 2018 by Indanger

[Xello99]

Hey,

 

I just updated my load order to the newest version of the guide. When running Dyndolod I get the following error:

[00:19:04.686]    Error: System Error.  Code: 5.
        Acces denied
[00:19:04.722]    
[00:19:04.723]    Exception in unit userscript line 331: One or more errors occurred
[00:19:04.723]    
[00:19:04.723]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.
[00:19:04.723]    
[00:19:04.723]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/
[00:19:04.781]    Error: One or more errors occurred

 

Here are the to logs that are mentioned at the end:

 

https://www.dropbox.com/s/kh2b8dmdjffj0l6/bugreport.txt?dl=0

https://www.dropbox.com/s/ove6hsxkd0y81z5/DynDOLOD_SSE_log.txt?dl=0

 

Can someone help me with this. I really have no idea what to do-_- It worked fine up until now. TexGen also worked just fine

[DarkladyLexy]

Hey,

 

I just updated my load order to the newest version of the guide. When running Dyndolod I get the following error:

[00:19:04.686]    Error: System Error.  Code: 5.

        Acces denied

[00:19:04.722]    

[00:19:04.723]    Exception in unit userscript line 331: One or more errors occurred

[00:19:04.723]    

[00:19:04.723]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

[00:19:04.723]    

[00:19:04.723]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/

[00:19:04.781]    Error: One or more errors occurred

 

Here are the to logs that are mentioned at the end:

 

https://www.dropbox.com/s/kh2b8dmdjffj0l6/bugreport.txt?dl=0

https://www.dropbox.com/s/ove6hsxkd0y81z5/DynDOLOD_SSE_log.txt?dl=0

 

Can someone help me with this. I really have no idea what to do-_- It worked fine up until now. TexGen also worked just fine

best to ask Sheon

[alkaiser]

Hey,

 

I just updated my load order to the newest version of the guide. When running Dyndolod I get the following error:

[00:19:04.686]    Error: System Error.  Code: 5.

        Acces denied

[00:19:04.722]    

[00:19:04.723]    Exception in unit userscript line 331: One or more errors occurred

[00:19:04.723]    

[00:19:04.723]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

[00:19:04.723]    

[00:19:04.723]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/

[00:19:04.781]    Error: One or more errors occurred

 

Here are the to logs that are mentioned at the end:

 

https://www.dropbox.com/s/kh2b8dmdjffj0l6/bugreport.txt?dl=0

https://www.dropbox.com/s/ove6hsxkd0y81z5/DynDOLOD_SSE_log.txt?dl=0

 

Can someone help me with this. I really have no idea what to do-_- It worked fine up until now. TexGen also worked just fine

I had a similar problem. I was able to avoid it by setting DynDOLOD Output to the DynDOLOD program folder instead of the Mod Organizer mods folder. When DynDOLOD was finished, I cut and paste the DynDOLOD Ouput folder into the MO mods folder.

[Xello99]

I had a similar problem. I was able to avoid it by setting DynDOLOD Output to the DynDOLOD program folder instead of the Mod Organizer mods folder. When DynDOLOD was finished, I cut and paste the DynDOLOD Ouput folder into the MO mods folder.

Tried it, now I have a different error:

 

[00:15:10.749]    Building a list of LOD objects, please wait...

[00:15:11.000]      World JaphetsFollyWorld

[00:15:11.024]        Reading Large Reference Data for JaphetsFollyWorld

[00:15:11.174]            Found 157 large references

[00:15:11.197]        Gathering references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for STAT ACTI MSTT CONT FURN DOOR LIGH TREE

[00:15:11.250]        Filtering 1011 references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for LOD

[00:15:11.272]          0 of 1011 done

[00:15:11.365]              Missing model "meshes\prometheus\architecture\fortssnow\impexticetower01_snow.nif"

[00:15:11.387]    Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Exception in unit process line 85: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

[00:15:11.417]    

[00:15:11.417]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/

[00:15:11.418]    Error: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

 

[DarkladyLexy]

Tried it, now I have a different error:

 

[00:15:10.749]    Building a list of LOD objects, please wait...

[00:15:11.000]      World JaphetsFollyWorld

[00:15:11.024]        Reading Large Reference Data for JaphetsFollyWorld

[00:15:11.174]            Found 157 large references

[00:15:11.197]        Gathering references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for STAT ACTI MSTT CONT FURN DOOR LIGH TREE

[00:15:11.250]        Filtering 1011 references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for LOD

[00:15:11.272]          0 of 1011 done

[00:15:11.365]              Missing model "meshes\prometheus\architecture\fortssnow\impexticetower01_snow.nif"

[00:15:11.387]    Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Exception in unit process line 85: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

[00:15:11.417]    

[00:15:11.417]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/

[00:15:11.418]    Error: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

 

again anything DynDOLOD or xLODGEN Related Sheson is the one to ask.

[Greg]

Tried it, now I have a different error:

 

[00:15:10.749]    Building a list of LOD objects, please wait...

[00:15:11.000]      World JaphetsFollyWorld

[00:15:11.024]        Reading Large Reference Data for JaphetsFollyWorld

[00:15:11.174]            Found 157 large references

[00:15:11.197]        Gathering references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for STAT ACTI MSTT CONT FURN DOOR LIGH TREE

[00:15:11.250]        Filtering 1011 references in JaphetsFollyWorld "Japhet's Folly" [WRLD:00094B35] for LOD

[00:15:11.272]          0 of 1011 done

[00:15:11.365]              Missing model "meshes\prometheus\architecture\fortssnow\impexticetower01_snow.nif"

[00:15:11.387]    Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Exception in unit process line 85: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

[00:15:11.417]    

[00:15:11.417]    Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

[00:15:11.417]    

[00:15:11.417]    If problem persists, post error report with entire contents (not just the last couple lines) of ..\DynDOLOD\bugreport.txt and ..\DynDOLOD\logs\DynDOLOD_SSE_log.txt to official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/

[00:15:11.418]    Error: Error: No model, can not create a dynamic LOD base record for Prom_ImpExtIceTower01_Snow [sTAT:A0004ED2] in DynDOLOD.esp

 

I suggest checking for this missing snow nif (highlighted above) before throwing it over to Sheson. I suspect this may come from one of the No Snow Under the Roof mods.

[puppies_on_acid]

Any suggestions at all?

I had this problem as well. I kept equipping and unequipping items and spells to no avail. So I just went about setting up all the MCM stuff and the Classic classes and Birth Signs menu eventually popped up in the middle of setting up the MCM's. Not sure why it took so long. Perhaps if you just go about setting things up it will eventually appear.