jdsmith2816

Your crash fixes ini isn't configured correctly or you don't ahve enboost configured properly in your enblocal.ini

Nope, feel free.

Correct; I had to choose something to standardize on for balance purposes and just went with KFR pretty much everywhere.... except where I chose not to for various reasons. In this case though I believe you're right; was simply overlooked. There are ALOT of changes some I'm sure slipped through the cracks. Thanks for helping check things into things!

Read a few posts back someone posted how htey fixed the problem. We'll get this resolved soon... probably just need to upload current cr patch since I am not experiencing the issue.

I've used wrye bash pretty extensively for SSE and for Oblivion... I can probably answer what questions you have about it in general..

https://requiem.atlassian.net/wiki/display/REQ19/Documentation+for+modders%2C+patch-makers+and+curious+users Read atleast the first two links below that in the side panel but the whole section I linked is good information to know and doesn't take long ot read. Once you have ask me any clarifying questions you might have and I'll answer them.

It's not that simple... who knows which of the non-master-requiring records from the patch you actually need? If you're at the point where you can tell for sure which ones you need then your need to ask this question is no more... If you're not at that point then you're inevitably going to take too much or too little and who knows what the consequences will be.

Using same CR patch... potentially tweaked more as I'm not sure when the last upload happened.

Correct.. I've never had the issue you're referring to. Also yes I agree... it should be fixed.

Sorry you had so much troubble jonny. It's probably just an issue with not having all the patches up to date.. I was around 30hrs into my playthrough before i got distracted with no crashes and only minor issues like some claralux oddness and a few floating lanterns.. We'll get it all sorted.

Your experience is giong to be very different.. SMC doesn't use whole texture packs.. It picks bits and pieces from each one to arrive at the end result.

You need smc__crpatch... There are no other patches for the beautification guide.. the load order I posted a few pages back via pastebin includes the SMC esp's in it. If you're missing smc__crpatch then the url I posted a few pages back to all of the patches includes it.. These things will be included in updates soon.

I'm sorry guys... I'll try to read and respond to the last couple pages soon... Just been really swamped IRL. Diana has her new pc so guide updates will be happening again in the near future. There's been an unfortunate 2-3 week gap where nothing has happened. I think that, at the least, we'll pull Claralux... it seems like there's a bit too much script load for the dynamic light adjustments to work as intended. They keep lagging out and doubling up. Pulling claralux is going to actually be a pita but I'll get it done.

Opening Scene Overhaul is compatible with Helgen Reborn. What other things were you thinking of?

How snarky... No, it's expected that once you've started a playthrough that you leave your load order alone as is common modding practice... If a major issue is found and you feel like it'll impact your particular playthrough then you judge whether or not it's worth risking the save to apply the fix. Most of the time it's not... There are thousands upon thousands of little bugs fixed by usleep and most loadouts have mods which have not properly forwarded hundreds of those fixes... Rarely do you even notice the difference... If a bug affects this little dungeon off in a corner of the world that you're not going to visit on this character and a fix is posted.. why do you care? If you feel the need to keep up to date with guide changes then have a second mod organizer install and keep that one fully up to date so that there's less work to do once you start a new playthrough...

IIRC I used KFR as the baseline for all balancing and reverted BtC stats.. I probably missed removal of the already reqtified keyword is all. I'd have to look again to be sure though.

Obviously there's one of two things here... 1. You have a hardware issue that needs diagnosing 2. You screwed up your install in some fashion If you're convinced that it's not a hardware issue then you're only left with number two... and two ways to address it.. 1. Diagnose your current install by systematically binary searching your mods to quickly locate the culprit.. - Turn off 50% of your mods - Check for the problem... - If problem persists, turn off 50% of the remainder.. if problem is gone turn on 50% of what you turned off - If problem comes back.. turn off 50% of what you turned back on... - Rinse and repeat, doing 50% at each step, until you arrive at the mod causing the problem.. 2. Start over paying careful attention to each step and checking the installation after each section... If you don't feel up to that then you're simply left with... Find something else to do with your time. I'm not trying to be an ass but raging isn't going to fix your issue. You either are willing to spend the time to work out your problem or you're not...

Hmm... I know I made the post at one point in here including this link https://www.dropbox.com/sh/su184875tgrrofd/AACYFFXh6xAv9U-0ezU6ifena but I'll be damned if I see it now.. In either case refer to that link.. ignore the two out of order FSP plugins.. everythign else is accurate. You just need the mods that are checked in the screenshot of the left side.. in that order. Post merge leave CoT enabled since it has an ESM file + assets. Arrange the plugins as you see in the rightside screen shot.. merge it up and give it a try. I highly recommend editing the 1200 range lantern in Wearable Lanterns to have the same stats as the torch record in RRD... I included a screenshot showing the changes that should be applied... In game in the Wearable Lanterns MCM just select teh 1200 range version. Additionally you need the enb download from https://www.nexusmods.com/skyrim/mods/24235/? Check bleakfalls barrow interior.. with and without torches.. make sure to run down the tunnels in both cases.. Check outside at night.. etc. You should find it to be basically perfectly lit. When you think you're hidden in a shadow you're really hidden in a shadow... It's quite glorious and I won't be playing any other way in the future. You can try other ENBs with that load out just ensure that they don't blow out the lighting.. If they make thing smuch darker or much brighter.. or mess around with eye adaptation.. it'll ruin the effect.

The MCM for CCO determine whether they show up on npc's or not..

https://www.nexusmods.com/skyrim/mods/64048/? This will let you use jaxonz positioner to position things how you want them then export it to a plugin that you can simoply merge into your cr patch

That'd be why it crashes ;) You only want the cleaned ESMs + the plugin you want to modify (esmified) then you use CK to create a enw plugin to house your changes.. After saving thsoe changes can safely be deep copied into your CRPatch

The instructions for the WLSO configuratin you're mentioning are a couple pages back including screenshots of left/right side before merge.

Are you opening the CK in a seperate profile with nothing enabled in the leftpane except your cleaned esms?

Sorry, I had to re-make my ectv crpatch because I was helping someone do ECTV without inns.. Just use the current ectv patch in the guide.. it'll work fine. forgot about that. Ignore the extra settlements expanded.esp in my load order I'm not currently using the requiem guide in my playthrough so I hadn't gotten around to putting my copy back to normal.

Guess these haven't been uploaded yet... https://dl.dropboxusercontent.com/u/2227296/SRLE%20LOTD%20Reqtified%20Compatibility%20Patches.7z Just like main guide only has one patch now so do ectv and smc now only have one patch now. Regarding which ones to download...Please make sure you read IN DETAIL the SMC mod page... all questions are pretty much anwered there. This one is answered under INSTALLATION PART2: GETTING THE MODS