DynDOLOD 3.00 Alpha 190

[SkyKatarsis]

Thanks for the answer, but in Windhelm the console was unable to capture these places, so it was not possible to take such a screenshot with it.

[sheson]

  On 11/3/2023 at 8:40 AM, SkyKatarsis said:

Thanks for the answer, but in Windhelm the console was unable to capture these places, so it was not possible to take such a screenshot with it.

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots
A screenshot alone does not substitute describing the issue with text. 
If making screenshots of the LOD area, also make screenshots of the close-up object or full model for comparison.
Note that tree LOD or object LOD does not have a form ID. To determine if something is LOD, toggle LOD on/off with tll in console. In that case, also walk close to an object, so its reference with the full model is loaded in order to get its form ID and provide that screenshot of the full model in addition to the screenshot of the LOD.

[SkyKatarsis]

  On 11/3/2023 at 9:54 AM, sheson said:

Прочтите первое сообщение и/или https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs . сообщений записывают в журнал и журнал отладки для , которые DynDOLOD загрузки при создании

https:// dyndolod .info/Official- DynDOLOD -Support-Forum#In-Game-Screenshots
Снимок экрана сам по себе не заменяет текстовое описание проблемы.
Если вы делаете скриншоты области LOD, сделайте также скриншоты объекта крупным планом или полной модели для сравнения.
Обратите внимание, что уровень детализации дерева или объекта не имеет идентификатора формы. Чтобы определить, является ли что-то LOD, включите/выключите LOD с помощью tll в консоли. В этом случае также подойдите близко к объекту, чтобы загрузить его ссылку с полной моделью, чтобы получить идентификатор формы и предоставить этот снимок экрана полной модели в дополнение к снимку экрана LOD.

Expand  

https://drive.google.com/file/d/1NcxpfjuWJg3GgUj8lxUdAUPuK7NLZN64/view?usp=sharing - my reports

The last 3 generations did not work, twice DynDOLOD closed spontaneously in the middle of the process without notifications.
 
 Once again I was stuck for several hours on the ..._glow.dds recording, without moving (such freezing can extend up to 1.5 days).

https://ibb.co/jvPG9rD
 
From the miraculously obtained last generation of lods, a bug arose with the tree, its lods turned black, previously they were generated absolutely correctly.  There is no way to take a useful screenshot of the lods of this tree.

https://ibb.co/M735k47

I looked at Windhelm without lods, in vanilla it has a similar terrible look.  I use the flight function in the game, so I can see all these things right away.  Open cities are not an option for me, because...  there are no patches for my number of mods (~1800).

Previously, DynDOLOD worked without such problems.  And even now DynDOLOD can miraculously generate everything as before in a little over an hour or in 8 hours, depending on your luck, but in 95% it just freezes for up to 1.5 days no results or closes spontaneously.  In general, I really need your help, because the situation is very difficult for my nerve cells Sorry for my bad English.

Thank you in advance.

[sheson]

  On 11/4/2023 at 8:25 AM, SkyKatarsis said:

https://drive.google.com/file/d/1NcxpfjuWJg3GgUj8lxUdAUPuK7NLZN64/view?usp=sharing - my reports

The last 3 generations did not work, twice DynDOLOD closed spontaneously in the middle of the process without notifications.
 
 Once again I was stuck for several hours on the ..._glow.dds recording, without moving (such freezing can extend up to 1.5 days).

https://ibb.co/jvPG9rD
 
From the miraculously obtained last generation of lods, a bug arose with the tree, its lods turned black, previously they were generated absolutely correctly.  There is no way to take a useful screenshot of the lods of this tree.

https://ibb.co/M735k47

I looked at Windhelm without lods, in vanilla it has a similar terrible look.  I use the flight function in the game, so I can see all these things right away.  Open cities are not an option for me, because...  there are no patches for my number of mods (~1800).

Previously, DynDOLOD worked without such problems.  And even now DynDOLOD can miraculously generate everything as before in a little over an hour or in 8 hours, depending on your luck, but in 95% it just freezes for up to 1.5 days no results or closes spontaneously.  In general, I really need your help, because the situation is very difficult for my nerve cells Sorry for my bad English.

Thank you in advance.

Expand  

Either really make a clean driver only installation or terminate all the crapware in task manager. https://imgur.com/14VpsWk
https://dyndolod.info/FAQ#TexGen-DynDOLOD-stuck-while-creating-textures

Black textures are typically either running out of VRAM in the game or there might have been errors when textures and/or LOD was generated. No TexGen/DynDOLOD logs and debug logs were provided for the "successful" generation.

[SkyKatarsis]

  On 11/4/2023 at 8:56 AM, sheson said:

Либо действительно сделайте чистую установку драйверов, либо удалите весь мусор в диспетчере задач. https://imgur.com/14VpsWk
https:// dyndolod .info/FAQ#TexGen- DynDOLOD -stuck-while-creating-textures

Черным текстурам обычно либо не хватает видеопамяти в игре, либо могли возникнуть ошибки при создании текстур и/или уровня детализации. не было предоставлено журналов TexGen/ DynDOLOD Для «успешной» генерации и журналов отладки.

Expand  

Thanks for the quick response.  I completed the processes you specified, performed a clean reinstall, reinstalled the video card driver, but DynDOLOD stopped generating at all, it closes in the middle of the process.  The folder DynDOLOD_Output contains created meshes and textures, but ESM, ESP and occlusions are not created.

date/time          : 2023-11-04, 02:35:50, 509ms
command line       : "D:\Modding\DynDOLOD 3.00-68518-Alpha-155\DynDOLODx64.exe" -sse
executable         : DynDOLODx64.exe
exec. date/time    : 2023-10-11 04:00
version            : 3.0.0.155
compiled with      : Delphi 11
madExcept version  : 5.1.2
callstack crc      : $07fa6911, $b095d5a8, $398ad257
exception number   : 1
exception class    : Exception
exception message  : OpenGL: недопустимая операция (operation is not allowed) for 0AE877F9 while processing 0AE877F9 (4).

I don't know how to fix this What am I doing wrong?

[sheson]

  On 11/4/2023 at 12:17 PM, SkyKatarsis said:

Thanks for the quick response.  I completed the processes you specified, performed a clean reinstall, reinstalled the video card driver, but DynDOLOD stopped generating at all, it closes in the middle of the process.  The folder DynDOLOD_Output contains created meshes and textures, but ESM, ESP and occlusions are not created.

date/time          : 2023-11-04, 02:35:50, 509ms
command line       : "D:\Modding\DynDOLOD 3.00-68518-Alpha-155\DynDOLODx64.exe" -sse
executable         : DynDOLODx64.exe
exec. date/time    : 2023-10-11 04:00
version            : 3.0.0.155
compiled with      : Delphi 11
madExcept version  : 5.1.2
callstack crc      : $07fa6911, $b095d5a8, $398ad257
exception number   : 1
exception class    : Exception
exception message  : OpenGL: недопустимая операция (operation is not allowed) for 0AE877F9 while processing 0AE877F9 (4).

I don't know how to fix this What am I doing wrong?

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log, debug log and enitre bugreport.txt (if it exists) to upload.

[SkyKatarsis]

  On 11/4/2023 at 1:06 PM, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log, debug log and enitre bugreport.txt (if it exists) to upload.

Expand  

https://drive.google.com/file/d/1Um-rdmMZ24yNKETYl0xDxFHpC_LY8mtl/view?usp=sharing

I already sent reports today, I am providing updated ones again. Thanks.

[sheson]

  On 11/4/2023 at 3:35 PM, SkyKatarsis said:

https://drive.google.com/file/d/1Um-rdmMZ24yNKETYl0xDxFHpC_LY8mtl/view?usp=sharing

I already sent reports today, I am providing updated ones again. Thanks.

Expand  

Those seem to be the same log, debug log and bugreport.txt uploaded earlier today which show that crapware is installed and active.

Assuming you now have a clean driver only install or terminated the crapware:
Delete the log folder. Delete bugreport.txt. Run DynDOLODx64.

If there is an error, upload the new log, debug log and bugreport.txt 
If the tool seems to be stuck, read https://dyndolod.info/FAQ#TexGen-DynDOLOD-stuck-while-creating-textures

[SkyKatarsis]

No, I have attached all the updated files.  This is probably because all attempts to generate logs were unsuccessful and none were completed; DynDOLOD simply closed spontaneously 4 times.

[sheson]

  On 11/4/2023 at 6:26 PM, SkyKatarsis said:

No, I have attached all the updated files.  This is probably because all attempts to generate logs were unsuccessful and none were completed; DynDOLOD simply closed spontaneously 4 times.

Expand  

Assuming you now have a clean driver only install or terminated the crapware:
Delete the log folder. Delete bugreport.txt. Run DynDOLODx64.

https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs
The log and debug log are saved when the program shuts down. Do not interrupt the shut down process so it can write the log files. If there are no logs or debug logs because the tool is being terminated prematurely, check the Windows Event log for related messages. Add RealTimeLog=1 under [TexGen] or [DynDOLOD] in ..\DynDOLOD\Edit Scripts\DynDOLOD\[TexGen|DynDOLOD]_[GAME MODE].INI respectively. Then execute the tool again to generate a debug log in the Logs folder in real time and upload that.

[Morti]

Weird stuff. After last time I generated DynDOLOD I found out that WInterhold bridge disappeared.

In SSEEDit I found out that DynDOLOD.esm changed its Z position from -9088 to -30000. You know why it could do that? Easily fixed, but still odd.

[sheson]

  On 11/5/2023 at 10:22 AM, Morti said:

Weird stuff. After last time I generated DynDOLOD I found out that WInterhold bridge disappeared.

In SSEEDit I found out that DynDOLOD.esm changed its Z position from -9088 to -30000. You know why it could do that? Easily fixed, but still odd.

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

It is disabled (set z = -30000) and replaced with a copy (non-large) reference (in DynDOLOD.esp) to fix the vanilla large reference bug seen in the video https://dyndolod.info/Help/Large-References#Large-Reference-Bugs if not using the large reference bugs workarounds.

[tamrieltwo]

I'm getting an error when using Base Object Swapper to swap trees. The DynDOLOD_SSE_Debug_log.txt says:

  Quote

[05:05] [LoadSwaps] <Debug: Ignoring Random: not Swapping record Skyrim.esm TreePineForest01 [TREE:0001306D] to TreePineForest01 Skyrim.esm TreePineForest01 [TREE:0001306D]>
[05:05] [LoadSwaps] <Debug: Ignoring Random: not Swapping record Skyrim.esm TreePineForest01 [TREE:0001306D] to LensTreePineForest01_Replace TreeSwapper.esp LensTreePineForest01_Replace [TREE:FE11E869]>
[05:05] [LoadSwaps] <Debug: Ignoring Random: not Swapping record Skyrim.esm TreePineForest01 [TREE:0001306D] to LensTreePineForest02_Replace TreeSwapper.esp LensTreePineForest02_Replace [TREE:FE11E86A]>
[05:05] [LoadSwaps] <Debug: Ignoring Random: not Swapping record Skyrim.esm TreePineForest01 [TREE:0001306D] to S3DTreePineForest01_Replace>

Expand  

However I'm using a correct and deterministic Base Object Swapper configuration:

  Quote

TreePineForest01|TreePineForest01|NONE|chanceS(100)
TreePineForest01|LensTreePineForest01_Replace|posR(0,0,-80)|chanceS(75)
TreePineForest01|LensTreePineForest02_Replace|posR(0,0,-80)|chanceS(50)
TreePineForest01|S3DTreePineForest01_Replace|posR(0,0,-84)|chanceS(30)

Expand  

The chanceS function in BOS is deterministic via a fixed seed and doesn't vary from one run to the next. It's similar to doing this:

  Quote

TreePineForest01|TreePineForest01,LensTreePineForest01_Replace,LensTreePineForest02_Replace,S3DTreePineForest01_Replace

Expand  

except it allows for more fine grained control over the relative frequencies of each swap, and it allows us to customize posR settings on a per-swap basis.

BOS: https://www.nexusmods.com/skyrimspecialedition/mods/60805

Thank you

Edited November 5, 2023 by tamrieltwo

[sheson]

  On 11/5/2023 at 2:13 PM, tamrieltwo said:

I'm getting an error when using Base Object Swapper to swap trees. The DynDOLOD_SSE_Debug_log.txt says:

However I'm using a correct and deterministic Base Object Swapper configuration:

The chanceS function in BOS is deterministic via a fixed seed and doesn't vary from one run to the next. It's similar to doing this:

except it allows for more fine grained control over the relative frequencies of each swap.

BOS: https://www.nexusmods.com/skyrimspecialedition/mods/60805

Thank you

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire DynDOLOD log and debug log to upload when making posts.

The messages you quoted do not contain the word "error", they are notifications that are printed to the debug log.

https://dyndolod.info/Mods/Base-Object-Swapper#Transform-Overrides
If any of the transformations contain a random min/max setting, the affected reference is ignored for LOD.

https://dyndolod.info/Mods/Base-Object-Swapper#Chance
Any randomized swaps defined with Chance are ignored by default. Any LOD will be generated for the original reference or base record.
Set SwapsChance=1 in ..\DynDOLOD\Edit Scripts\DynDOLOD\DynDOLOD_[GAME MODE].ini in case all these references or base records should be ignored for LOD.

Chance of any form is not supported.

[tamrieltwo]

.

Edited November 5, 2023 by tamrieltwo
Realized what I said was wrong