Jump to content

Recommended Posts

Posted
  On 1/28/2024 at 9:17 PM, sheson said:

Start DynDOLOD in Expert Mode. https://dyndolod.info/Help/Expert-Mode
Select the arnimaDUPLICATE003
Change the Specific Chunk dropdown to 4.
Click "Execute LODGen" button. I am expecting it to run through without error.
Change Specific Chunk dropdown to 8.
Click "Execute LODGen" button. I am expecting it to run through without error

In case there are errors in those LOD levels let me know.

Expand  

Both ran without error.

Posted (edited)

Hey @sheson I have a question that's kind of the opposite of the usual:

I have a 7800X3D and 64GB of RAM and a 24GB graphics card.   Data folder is on a PCie 4x4 drive and DynDOLOD is running on a different PCIe 4x4 drive.

Is it possible to tune DynDOLOD to use more cores/RAM to process faster?

Edit: it isn't slow and usually finishes in under 15 minutes.

Edited by Mertz
Posted
  On 1/29/2024 at 12:17 AM, Mertz said:

Hey @sheson I have a question that's kind of the opposite of the usual:

I have a 7800X3D and 64GB of RAM and a 24GB graphics card.   Data folder is on a PCie 4x4 drive and DynDOLOD is running on a different PCIe 4x4 drive.

Is it possible to tune DynDOLOD to use more cores/RAM to process faster?

Edit: it isn't slow and usually finishes in under 15 minutes.

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

The -speed command line argument will make xEdit use more memory by keeping more record data

There is nothing in the tools that limits core usage, they have threads which are not core bound.
You can experiment with the LODGenThreadSplit for LODGen in DynDOLOD_SSE.ini
Try MaxLODGenPerWorldspace=0 if you generate LOD for seasons.
Since occlusion usually does not need to load object LOD meshes anymore, the OcclusionMaxThreadsObjectLOD will not really make a difference.

Posted
  On 1/28/2024 at 10:10 PM, DarthVitrial said:

Both ran without error.

Expand  

Get this test version https://mega.nz/file/UB5kCRaR#E2N9_ByJAQ19TeRQSF-NpyKtXmvtUoBLUQb_gxSv93E

Start DynDOLOD in Expert Mode.
Select the arnimaDUPLICATE003 worldspace
Set the dropdowns Specific Chunk to 16, W to 0 and S to - 32
Click the "Execute LODGen" button.
Upload the new E:\Dyndolod\Logs\LODGen_SSE_arnimaDUPLICATE003_log.txt

Posted (edited)
  On 1/29/2024 at 9:01 AM, sheson said:

Get this test version https://mega.nz/file/UB5kCRaR#E2N9_ByJAQ19TeRQSF-NpyKtXmvtUoBLUQb_gxSv93E

Start DynDOLOD in Expert Mode.
Select the arnimaDUPLICATE003 worldspace
Set the dropdowns Specific Chunk to 16, W to 0 and S to - 32
Click the "Execute LODGen" button.
Upload the new E:\Dyndolod\Logs\LODGen_SSE_arnimaDUPLICATE003_log.txt

Expand  

 

DynDOLOD_SSE_Debug_log.txt DynDOLOD_SSE_log.txt LODGen_SSE_arnimaDUPLICATE003_log.txt


EDIT:
I found a copy of meshes\landscape\trees\reachtree02_lod_2.nif in my MO2 data files that I wasn't aware of thanks to that log.

I'm going to delete that and try again.

Edited by DarthVitrial
Posted
  On 1/29/2024 at 8:29 AM, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

The -speed command line argument will make xEdit use more memory by keeping more record data

There is nothing in the tools that limits core usage, they have threads which are not core bound.
You can experiment with the LODGenThreadSplit for LODGen in DynDOLOD_SSE.ini
Try MaxLODGenPerWorldspace=0 if you generate LOD for seasons.
Since occlusion usually does not need to load object LOD meshes anymore, the OcclusionMaxThreadsObjectLOD will not really make a difference.

Expand  

Thanks @sheson

the --speed switch sounds like just what I need. Much appreciated :D

Posted

Hey all, I've been doing some LOD generation recently and I was wondering if anyone could enlighten me on what the CMD output for object generation means. An example of what I mean is, "Finished LOD level x coord [x, y] [??/??]". What are those last two numbers in the output? I've looked around but I couldn't find an answer easily. So if anyone has any idea please let me know. Thanks!

Posted
  On 2/1/2024 at 5:00 PM, ObviousThr33s said:

Hey all, I've been doing some LOD generation recently and I was wondering if anyone could enlighten me on what the CMD output for object generation means. An example of what I mean is, "Finished LOD level x coord [x, y] [??/??]". What are those last two numbers in the output? I've looked around but I couldn't find an answer easily. So if anyone has any idea please let me know. Thanks!

Expand  

For object LOD the number of triangles before and after optimizations.
For terrain LOD, the number of triangles for terrain and water.

Posted (edited)

If Dyndolod does a Disable and Create new reference to bypass Large Ref bugs on a given reference.  Should Dyndolod.esp be un-disabling the override in Dyndolod.esm?

i93knSk.png

qSARpTF.png

Its showing up doubled in game due to this

4lYQfQi.png

Log is over 200 MB long, here's every message linking to the vanilla REFR Form Id.

  Reveal hidden contents

 

Edited by robertgk2017
Posted
  On 2/2/2024 at 8:35 AM, robertgk2017 said:

If Dyndolod does a Disable and Create new reference to bypass Large Ref bugs on a given reference.  Should Dyndolod.esp be un-disabling the override in Dyndolod.esm?

i93knSk.png

qSARpTF.png

Its showing up doubled in game due to this

4lYQfQi.png

Log is over 200 MB long, here's every message linking to the vanilla REFR Form Id.

  Reveal hidden contents

 

Expand  

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire DynDOLOD log and debug log to upload when making posts. Zip large logs and use a file service as explained.

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#xEdit-Screenshots

Posted
  On 2/2/2024 at 9:38 AM, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire DynDOLOD log and debug log to upload when making posts. Zip large logs and use a file service as explained.

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#xEdit-Screenshots

Expand  

This issue is from another user, I am awaiting for the full logs.  Generally though i would think the .esp shouldn't be re-enabling that reference given it's a large ref bugs causing refr right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.