DynDOLOD 3.00 Alpha 182

[m1sf1t711]

51 minutes ago, sheson said:

You might have missed my edit, so:

Put windmillfarm_lod_2.nif into ..Meshes\lod\whiterun\windmillfarm_lod_2.nif of DynDOLOD Resources SE and generate LOD again. That hopefully should fix it.

Still a mystery why there wouldn't be any LOD without DynDOLOD output.

Thank you so much! That's worked perfectly

[m1sf1t711]

I think there may have been a problem when you uploaded Resources Alpha-53 to Nexus as when I run DynDOLOD Aplha 181 from Nexus it says I am using the wrong Resources version.

I noticed that Nexus has had a few banner warnings about uploading being disabled during maintenance so I'm just wondering if something corrupted?

EDIT: Or is it that guidance has changed and I shouldn't be letting other mod assets overwrite Resources any more?

 

(I know I don't actually need to update after your support last night but I like to keep up to date with Nexus versions so I can keep track  )

Edited October 10 by m1sf1t711

[sheson]

42 minutes ago, m1sf1t711 said:

I think there may have been a problem when you uploaded Resources Alpha-53 to Nexus as when I run DynDOLOD Aplha 181 from Nexus it says I am using the wrong Resources version.

I noticed that Nexus has had a few banner warnings about uploading being disabled during maintenance so I'm just wondering if something corrupted?

EDIT: Or is it that guidance has changed and I shouldn't be letting other mod assets overwrite Resources any more?

 

(I know I don't actually need to update after your support last night but I like to keep up to date with Nexus versions so I can keep track  )

No logs were provided.

I will reup the Resources ASAP as Alpha-53.1

[Tetrol88]

Resources V53.1 - Still getting informed that the Resources are the wrong version, also got one saying to make sure the scripts from DynDOLOD DLL NG were overwriting the DynDOLOD resources - which they already were.

Edited October 10 by Tetrol88

[m1sf1t711]

23 minutes ago, sheson said:

No logs were provided.

I will reup the Resources ASAP as Alpha-53.1

Thank you so much for all your rapid support. It's very much appreciated.

I just downloaded and installed Resources Alpha 53.1 and reran TexGen but then on trying to run DynDOLOD I got an error message saying "Required resource file not found textures/lod/sstuccowallint01.dds"

[sheson]

17 minutes ago, Tetrol88 said:

Resources V53.1 - Still getting informed that the Resources are the wrong version, also got one saying to make sure the scripts from DynDOLOD DLL NG were overwriting the DynDOLOD resources - which they already were.

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire DynDOLOD log and debug log to upload when making posts.

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#Copy-and-Paste-Text how to copy and paste entire error messages as text.

Delete old DynDOLOD Resoureces SE and install the latest version.
Delete old DynDOLOD DLL NG and Scripts and install the latest version. Make sure none of its files are being overwritten by anything.

[sheson]

10 minutes ago, m1sf1t711 said:

Thank you so much for all your rapid support. It's very much appreciated.

I just downloaded and installed Resources Alpha 53.1 and reran TexGen but then on trying to run DynDOLOD I got an error message saying "Required resource file not found textures/lod/sstuccowallint01.dds"

No logs were provided.

Also download latest DynDOLOD 3 Alpha-181.1

[m1sf1t711]

2 hours ago, sheson said:

No logs were provided.

Also download latest DynDOLOD 3 Alpha-181.1

Lod generated and tested and all working beautifully, thank you!

[Jayombi]

Dear sheson,

Did you ever find the cause to the lack of flying crows with regards the issue I had in Skyrim VR couple of weeks back on here ?

I believe I got to you all the info you required, unless there was something else I missed ?

I wondered if the update you just released may have fixed it, but I got nothing still my end again after I ran Dydolod.

 

Thanks.

[OdinsEye333]

I don't see an button to attach document, so im just going to cop paste it, sorry if it's inconvenient.

I'm starting to get these errors when i generate LOD through Dyndolod. i got these errors, redid my LO with bare minimum and worked fine, now im getting this error again. i also recently add Mask=Mountain to the rules. it gave me an error saying there is nothing im load order that requires mask=mountain rule. i hit ignore button. I use majestic mountain main. ontop of now skyland AIO parallax etc.

 

[sheson]

8 minutes ago, OdinsEye333 said:

I don't see an button to attach document, so im just going to cop paste it, sorry if it's inconvenient.

I'm starting to get these errors when i generate LOD through Dyndolod. i got these errors, redid my LO with bare minimum and worked fine, now im getting this error again. i also recently add Mask=Mountain to the rules. it gave me an error saying there is nothing im load order that requires mask=mountain rule. i hit ignore button. I use majestic mountain main. ontop of now skyland AIO parallax etc.

 

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log and debug and bugreport.txt to upload to a paste bin or file service when making posts.

[sheson]

2 hours ago, Jayombi said:

Dear sheson,

Did you ever find the cause to the lack of flying crows with regards the issue I had in Skyrim VR couple of weeks back on here ?

I believe I got to you all the info you required, unless there was something else I missed ?

I wondered if the update you just released may have fixed it, but I got nothing still my end again after I ran Dydolod.

 

Thanks.

I will look into it some time next week.

[D1Z4STR]

On 8/6/2023 at 9:36 AM, sheson said:

Child > Parent
"Low" is the old default that just happened automatically.
"Medium" will take care of trees in cities. Vanilla Riften has some aspens that are then visible, so I'd use that.

Parent > Child
Since it replaces the Whiterun and Solitude Exterior patches from older DynDOLOD Resources, enable that check box if you are interested in proper surroundings and used those patches before. Especially helpful for Whiterun, Riften and Solitude if you use mods like Legacy of the Dragonborn where you can actually see outside. Do not use if performance is more important and then just don't peak outside. If large reference bugs workarounds is used, you can disable large references in child worlds from the SkyUI MCM to regain a bit of performance.

Make sure to read https://dyndolod.info/Help/Child-Parent-Worldspace-Copies if controlling things individually for a specific child world is needed.

From the help section it states - To globally enable or disable copying of references from parent worldspaces to child worldspaces, use the Parent > child checkbox in the advanced mode settings.

The above quote you mention Parent > Child option and using patches to accomplish what this does, and I am confused on when to use Parent > Child or when not to use it

The question is - Can you see full trees outside of Whiterun while in the city with Parent > Child ticked off (default setting)?

I have read Child/Parent Worldspace Copies and looking for clarification

*edit* I think this setting pertains to using mods that add references

I was the 10,000th reply 

[sheson]

1 hour ago, D1Z4STR said:

This is in regards to Tree LOD

From the help section it states - To globally enable or disable copying of references from parent worldspaces to child worldspaces, use the Parent > child checkbox in the advanced mode settings.

The above quote you mention Parent > Child option and using patches to accomplish what this does and I am confused on when to use Parent > Child or when not to use it

Can you still see trees outside of Whiterun while in the city with Parent > Child ticked off (default setting)? What else does the Parent > Child option 

I was the 10,000th reply 

No logs.

To answer your question for your load order, load the game and check what you see.

If you believe there are trees orither objects missing right outside the cities, then check the setting. If you have poor performance in cities then don't use the setting.

Read the entire page https://dyndolod.info/Help/Child-Parent-Worldspace-Copies

[D1Z4STR]

I think I understand now. It is related to mods that add new or edit references/records. So, my question is with pure vanilla skyrim would the Parent > Child option need ticked on to see objects like trees in parent world 'Tamriel' from within a child world