BigPoppa Posted June 17, 2022 Posted June 17, 2022 (edited) Help. DynDOLOD SE 3 reports the most up to date DynDOLOD Resources SE version (linked in this guide https://steamcommunity.com/sharedfiles/filedetails/?id=2789657603) as outdated, thus refuses to start. I did everything exactly as the guide told me to and everything went smoothly until that point.. Honestly no clue what I should do now lol. Anyone else having this problem? Edited June 17, 2022 by BigPoppa
BigPoppa Posted June 17, 2022 Posted June 17, 2022 (edited) Nevermind I fixed the issue. Somehow I still ended up with the wrong Resource file. After replacing it with the 3.0 version everything was cash money. However, now the following issue occurs: DynDOLOD_SSE_log.txt What to do? Edited June 17, 2022 by BigPoppa Actualization
sheson Posted June 18, 2022 Author Posted June 18, 2022 8 hours ago, BigPoppa said: Nevermind I fixed the issue. Somehow I still ended up with the wrong Resource file. After replacing it with the 3.0 version everything was cash money. However, now the following issue occurs: DynDOLOD_SSE_log.txt What to do? Read the first post which log, debug log and bugreport.txt it to upload. See https://dyndolod.info/Messages/Exceptions#Access-violation-at-address Fix errors like https://dyndolod.info/Messages/Internal-File-FormID-Is-A-HITME
BigPoppa Posted June 18, 2022 Posted June 18, 2022 1 hour ago, sheson said: Read the first post which log, debug log and bugreport.txt it to upload. See https://dyndolod.info/Messages/Exceptions#Access-violation-at-address Fix errors like https://dyndolod.info/Messages/Internal-File-FormID-Is-A-HITME Thank you for your reply. Only Daedric Castle and SnowElf Palace Contain HITME Records and they dont even have any masters as far as the mod pages tell me. Very fishy. Can I ignore this then? bugreport.txt Also debug log txt is too big. Im not permitted to upload it. xD
sheson Posted June 18, 2022 Author Posted June 18, 2022 46 minutes ago, BigPoppa said: Also debug log txt is too big. Im not permitted to upload it. xD Use a file or text sharing service as explained in the first post. 46 minutes ago, BigPoppa said: Thank you for your reply. Only Daedric Castle and SnowElf Palace Contain HITME Records and they dont even have any masters as far as the mod pages tell me. Very fishy. Can I ignore this then? I can not tell you if broken plugins from 3rd party mods can be can be salvaged. That is outside the scope of testing DynDOLOD Alpha / providing support. What I can tell you is that ignoring errors or problems or temporarily disabling mods or plugins does not fix the errors or problems.
DarthVitrial Posted June 20, 2022 Posted June 20, 2022 (edited) Got another Assertion Failure in alpha 95. Probably another race condition? Assertion failure (C:\Delphi\Projects\DynDOLOD3\Core\wbImplementation.pas, line 17465) while processing cckrtsse001_altar.esl [REFR:FE03EF28] (places RockPileL03Snow_HeavySN [STAT:0005B506] in GRUP Cell Temporary Children of [CELL:FE03EE5D] (in ccKRTSSE001QNWorld "Giant's Tooth" [WRLD:FE03EA5F] at -1,1)) Logs: https://mega.nz/file/l1UD3L6S#DePgP5PJUq3nUPXBFdFm7pITaAA-6Otg6x5SaF-L3ks Bugreport attached. key point in the debug log: 00000000 ??? 01047b48 DynDOLODx64.exe DynDOLODResourceStrings 802 dynMessageDialog 0103f274 DynDOLODx64.exe xeMainForm 21196 TLODGenThread.Execute 005de270 DynDOLODx64.exe System.Classes ThreadProc 0042aa05 DynDOLODx64.exe BrainMM 2540 BrainMMThreadProxy 0041214a DynDOLODx64.exe System ThreadWrapper 00511c69 DynDOLODx64.exe madExcept ThreadExceptFrame 7ffc3e16 KERNEL32.DLL BaseThreadInitThunk 7ffc4010 ntdll.dll RtlUserThreadStart bugreport.txt Edited June 20, 2022 by DarthVitrial
sheson Posted June 20, 2022 Author Posted June 20, 2022 1 hour ago, DarthVitrial said: Got another Assertion Failure in alpha 95. Probably another race condition? Assertion failure (C:\Delphi\Projects\DynDOLOD3\Core\wbImplementation.pas, line 17465) while processing cckrtsse001_altar.esl [REFR:FE03EF28] (places RockPileL03Snow_HeavySN [STAT:0005B506] in GRUP Cell Temporary Children of [CELL:FE03EE5D] (in ccKRTSSE001QNWorld "Giant's Tooth" [WRLD:FE03EA5F] at -1,1)) Logs: https://mega.nz/file/l1UD3L6S#DePgP5PJUq3nUPXBFdFm7pITaAA-6Otg6x5SaF-L3ks Bugreport attached. key point in the debug log: Reveal hidden contents 00000000 ??? 01047b48 DynDOLODx64.exe DynDOLODResourceStrings 802 dynMessageDialog 0103f274 DynDOLODx64.exe xeMainForm 21196 TLODGenThread.Execute 005de270 DynDOLODx64.exe System.Classes ThreadProc 0042aa05 DynDOLODx64.exe BrainMM 2540 BrainMMThreadProxy 0041214a DynDOLODx64.exe System ThreadWrapper 00511c69 DynDOLODx64.exe madExcept ThreadExceptFrame 7ffc3e16 KERNEL32.DLL BaseThreadInitThunk 7ffc4010 ntdll.dll RtlUserThreadStart bugreport.txt 167.76 kB · 0 downloads How reproducible is this one?
DarthVitrial Posted June 20, 2022 Posted June 20, 2022 10 hours ago, sheson said: How reproducible is this one? Maybe 10% of the time or so?
eternalraven Posted June 20, 2022 Posted June 20, 2022 (edited) Running Dyndolod (v3.00 Alpha 95) I get this seam along the top line of the trees. I can not figure out the cause of this or how to make it go away, or find anyone else with the same issue. It's a little hard to see in the picture because it's only a few pixels thick. Look at the very distant trees around the crosshair. It's more noticeable in game and it flickers as you move. It's as though someone put a straight, horizontal line right at the top of the trees. Or the very top of the invisible 'square' around LODs, like there's an outline. The problem seems to be with the lods for trees pine tree 01, pine tree light snow 01. It also affects very distant LODs. Once you get close enough (but where the trees are still LODs) the problem goes away. Edited June 20, 2022 by eternalraven forgot detail about specific model of trees affected
Dez756 Posted June 21, 2022 Posted June 21, 2022 Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time. I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South). When I disable the Dyndolod plugins, though, I can look at those gates without issue. I'm pulling my hair out on this. My main question is should I concentrate on Dyndolod or are there other issues you think I should check first. Thanks for your anticipated help.
z929669 Posted June 21, 2022 Posted June 21, 2022 1 hour ago, eternalraven said: Running Dyndolod (v3.00 Alpha 95) I get this seam along the top line of the trees. I can not figure out the cause of this or how to make it go away, or find anyone else with the same issue. It's a little hard to see in the picture because it's only a few pixels thick. Look at the very distant trees around the crosshair. It's more noticeable in game and it flickers as you move. It's as though someone put a straight, horizontal line right at the top of the trees. Or the very top of the invisible 'square' around LODs, like there's an outline. The problem seems to be with the lods for trees pine tree 01, pine tree light snow 01. It also affects very distant LODs. Once you get close enough (but where the trees are still LODs) the problem goes away. What mod are you using for trees specifically ... what file and version? I had to maximize the image to see what you mean. It's a small horizontal line just above billboard trees. What is your tree mesh rule? Try TFC in the console to get closer to the billboard. Please provide the tree name of the affected billboards (e.g., treepineforestsnowl01.nif) It looks like you could possibly resolve to some extent with an adjustment to TreeMSAlphaThreshold in TexGen_SSE.ini ... maybe 144 or something like that. I doubt this is a DynDOLOD issue. It's probably the texture UV being off or having some noise where it's not wanted.
z929669 Posted June 21, 2022 Posted June 21, 2022 44 minutes ago, Dez756 said: Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time. I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South). When I disable the Dyndolod plugins, though, I can look at those gates without issue. I'm pulling my hair out on this. My main question is should I concentrate on Dyndolod or are there other issues you think I should check first. Thanks for your anticipated help. See forum posting rules in the parent forum and the OP. Log files needed for DynDOLOD. Those will possibly provide useful related xEdit errors.
Eliian Posted June 21, 2022 Posted June 21, 2022 Are you using Cutting Room Floor? Both Jk's Skyrim and CRF add the north gate as usable. Dyndolod could be creating files for both gates. I use the patch from JK's Skyrim page. If you are not using it try it out. Others have reported issues with the riften gates with both mods installed such as overlapping.
sheson Posted June 21, 2022 Author Posted June 21, 2022 12 hours ago, DarthVitrial said: Maybe 10% of the time or so? It is not always the same plugin and record, right? 7 hours ago, BrotherShamus said: Works perfectly. Thanks! Thanks for letting us know. Enjoy.
sheson Posted June 21, 2022 Author Posted June 21, 2022 7 hours ago, Dez756 said: Hi - upgraded to Dyndolod 3.0 Alpha 95 after using 2.93 successfully for a long time. I ran xLodgen and Texgen (as well as Dyndolod) using the instructions here and at the main site. The results, using Happy Little Trees, Veydosebrom, JK's Skyrim, Majestic Mountains and EEK's Renthal, are fantastic throughout Tamriel. But when I go to Riften, I get an immediate CTD whenever I am able to see the Gates (North or South). When I disable the Dyndolod plugins, though, I can look at those gates without issue. I'm pulling my hair out on this. My main question is should I concentrate on Dyndolod or are there other issues you think I should check first. Thanks for your anticipated help. I moved the post to the DynDOLOD 3 Alpha thread. Read the first post which log and debug log to upload when making posts. Pay attention to the log messages and the summary that might open at the end. https://dyndolod.info/Help/Summary-Of-Messages See the answers for "ILS or CTD" at https://dyndolod.info/FAQ, then read the ..\DynDOLOD\docs\DynDOLOD-README.txt as suggested by one of the answers. Upload crash log from .NET Script Framework or Crash Logger if you are using game runtime 1.6.x
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now