MisterMorden Posted October 19 Share Posted October 19 7 hours ago, sheson said: Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire logs and debug logs to upload when making posts. Here go: TexGen - https://ufile.io/f/fupmk Dyndolod - https://ufile.io/f/7hk59 No bugreport generated. Link to comment Share on other sites More sharing options...
sheson Posted October 19 Author Share Posted October 19 11 hours ago, MisterMorden said: Here go: TexGen - https://ufile.io/f/fupmk Dyndolod - https://ufile.io/f/7hk59 No bugreport generated. This test version should fix the path issue https://mega.nz/file/UBgTHJja#F5MxXAUf6hwLKq5AnRL0gtsjR9p8X-HPxX6rb_guyR8 1 Link to comment Share on other sites More sharing options...
MisterMorden Posted October 19 Share Posted October 19 1 hour ago, sheson said: This test version should fix the path issue https://mega.nz/file/UBgTHJja#F5MxXAUf6hwLKq5AnRL0gtsjR9p8X-HPxX6rb_guyR8 I will try it asap...might have to be tomorrow I'm afraid but it will be done. Many thanks! Link to comment Share on other sites More sharing options...
sheson Posted October 19 Author Share Posted October 19 21 minutes ago, MisterMorden said: I will try it asap...might have to be tomorrow I'm afraid but it will be done. Many thanks! https://dyndolod.info/Official-DynDOLOD-Support-Forum Try not to make posts that only promise more information, logs, results etc. in the future. If it takes time to first gather information, logs, results etc. it is fine to just take it and then post when ready. Link to comment Share on other sites More sharing options...
bebsi Posted October 19 Share Posted October 19 I'm so sorry to ask but I'm at my wits end and I feel so stupid trying to get this figured out. I'm on Skyrim VR running the Fus Roh Dah modlist off Wabbajack, and the mods I've installed are the following: Ordinator Ordinator VR Patch Mysticism - Ordinator Compatibility Patch Apocalypse - Ordinator Compatibility Patch Serana Dialogue Overhaul Sacrosanct 6.0.0 ORI - Harkon's Sword - Blood Matron Volkihar Knight SE 1.0.0 Fuz Ro D'oh VR Vigilant SE AE I'm able to run LodGen and TexGen without issue, however my DynDOLOD gives me this error every time Error: Assertion failure (E:\Delphi\Projects\DynDOLOD3\Core}wbImplementation.pas, line 8974) I don't know where to even start to figure out whats going on, what's wrong, etc. Any guidance would be appreciated. Link to comment Share on other sites More sharing options...
sheson Posted October 19 Author Share Posted October 19 1 hour ago, bebsi said: I'm so sorry to ask but I'm at my wits end and I feel so stupid trying to get this figured out. I'm on Skyrim VR running the Fus Roh Dah modlist off Wabbajack, and the mods I've installed are the following: Ordinator Ordinator VR Patch Mysticism - Ordinator Compatibility Patch Apocalypse - Ordinator Compatibility Patch Serana Dialogue Overhaul Sacrosanct 6.0.0 ORI - Harkon's Sword - Blood Matron Volkihar Knight SE 1.0.0 Fuz Ro D'oh VR Vigilant SE AE I'm able to run LodGen and TexGen without issue, however my DynDOLOD gives me this error every time Error: Assertion failure (E:\Delphi\Projects\DynDOLOD3\Core}wbImplementation.pas, line 8974) I don't know where to even start to figure out whats going on, what's wrong, etc. Any guidance would be appreciated. Moved to the DynDOLOD 3 Alpha thread. Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD lo, debug log and bugreport.txt to upload when making posts. Use the "Copy this message to clipboard" link shown in the message window to copy/paste messages in stead of posting a screenshot as explained in the first and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Copy-and-Paste-Text Use the link "Click on this link for additional explanations and help for this message" link shown in the message window to open https://dyndolod.info/Messages/Exceptions#Assertion-failure as explained in the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Read-Log-and-Error-Messages: Always use the latest version of DynDOLOD/TexGen as explained above. If the assertion failure is a 100% repeatable, it might be caused by a broken plugin. Clean and error check the load order with xEdit before generating LOD as explained above. If the assertion failure is not 100% repeatable or no error can be found in plugins, it could be a bug with the tools encountering unexpected situations. Make a report with the log, debug log and bugreport.txt as explained on the official DynDOLOD support forum. Link to comment Share on other sites More sharing options...
m1sf1t711 Posted October 21 Share Posted October 21 Hi again Sheson I needed to rerun DynDOLOD and I am suddenly running into this error and can't see any error messages in the logs. Error: LODGenx64Win.exe failed to generate object LOD for one or more worlds. Check for error messages in the listed LODGen log(s) Error: LODGenx64Win.exe failed to generate object LOD for Tamriel AUT. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_AUT_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SUM. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SUM_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel WIN. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_WIN_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_log.txt Here's a link to my logs: https://drive.google.com/file/d/1ik1O1lEBecszryMQXyIP14PTeShoPdGK/view?usp=sharing I suspect it will be something on my PC causing a problem. I've tried reinstalling .NET Desktop Runtime 6 just in case and tried generating LOD in expert mode for just the affected world spaces but had the same problem. I've attached logs of my latest attempt to run DynDOLOD for all world spaces. I always run in expert mode so I can put in the rules for A Clear World Map, ERM and Happy Little Trees. Link to comment Share on other sites More sharing options...
sheson Posted October 21 Author Share Posted October 21 22 minutes ago, m1sf1t711 said: Hi again Sheson I needed to rerun DynDOLOD and I am suddenly running into this error and can't see any error messages in the logs. Error: LODGenx64Win.exe failed to generate object LOD for one or more worlds. Check for error messages in the listed LODGen log(s) Error: LODGenx64Win.exe failed to generate object LOD for Tamriel AUT. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_AUT_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SUM. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SUM_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel WIN. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_WIN_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_log.txt Here's a link to my logs: https://drive.google.com/file/d/1ik1O1lEBecszryMQXyIP14PTeShoPdGK/view?usp=sharing I suspect it will be something on my PC causing a problem. I've tried reinstalling .NET Desktop Runtime 6 just in case and tried generating LOD in expert mode for just the affected world spaces but had the same problem. I've attached logs of my latest attempt to run DynDOLOD for all world spaces. I always run in expert mode so I can put in the rules for A Clear World Map, ERM and Happy Little Trees. See https://dyndolod.info/Help/LODGen: C0000005/80131506 - If happening randomly can be a sign of hardware issues like CPU or memory being unstable. Reduce memory requirements. See Out of Memory below. See FAQ High Memory Usage / Out of Memory. Expert mode does not change being able to add or change rules in advanced mode already. See https://dyndolod.info/Help/Expert-Mode Link to comment Share on other sites More sharing options...
sheson Posted October 21 Author Share Posted October 21 On 10/10/2024 at 10:30 PM, Jayombi said: Dear sheson, Did you ever find the cause to the lack of flying crows with regards the issue I had in Skyrim VR couple of weeks back on here ? I believe I got to you all the info you required, unless there was something else I missed ? I wondered if the update you just released may have fixed it, but I got nothing still my end again after I ran Dydolod. Thanks. The latest version of Flying Crows seem to work fine in Skyrim VR just as it does in Skyrim SE using the latest versions DynDOLOD, Resources and DynDOLOD DLL NG. Make sure to use the Low, Medium or High button so the mesh rules included in the mod are loaded. If any problem persists upload the DynDOLOD log and debug log. Link to comment Share on other sites More sharing options...
mostwanted11 Posted October 21 Share Posted October 21 (edited) Running texgen.exe/dyndolod.exe prompts me to update it, how can I prevent it from doing that? I understand I should update but I am happy with the old version and what it does and i don't want to lose my settings and whatnot. Also this old version doesn't CTD on load so.. Can I somehow workaround this prompt? I promise I won't bother you with an issue while using it Edited October 21 by mostwanted11 Link to comment Share on other sites More sharing options...
sheson Posted October 21 Author Share Posted October 21 1 hour ago, mostwanted11 said: Running texgen.exe/dyndolod.exe prompts me to update it, how can I prevent it from doing that? I understand I should update but I am happy with the old version and what it does and i don't want to lose my settings and whatnot. Also this old version doesn't CTD on load so.. Can I somehow workaround this prompt? I promise I won't bother you with an issue while using it https://dyndolod.info/FAQ#Older-versions If you have a problem with the latest version - like the insinuated CTD - post a problem report as explained in the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum Link to comment Share on other sites More sharing options...
m1sf1t711 Posted October 21 Share Posted October 21 8 hours ago, sheson said: See https://dyndolod.info/Help/LODGen: C0000005/80131506 - If happening randomly can be a sign of hardware issues like CPU or memory being unstable. Reduce memory requirements. See Out of Memory below. See FAQ High Memory Usage / Out of Memory. Expert mode does not change being able to add or change rules in advanced mode already. See https://dyndolod.info/Help/Expert-Mode Hi I've had a go at following all the advice given but I'm still having the same problem and noticed this error message as well so I tried the ini change for occlusion not generating: <Error: Occlusion generation aborted due to LODGen error> Here's a link to my latest logs: https://drive.google.com/file/d/1gLyHh4cYNPubAtV7dvXJSQAfSXJF6HCi/view?usp=sharing And also a link to a copy of my DynDOLOD_SSE.ini so you can see what changes I tried: https://drive.google.com/file/d/1nnSqISDbBIw8oKkyjU-8b0ddmqqHZ0es/view?usp=sharing I previously ran DynDOLOD successfully using all the same settings within the start up window as I am using now. I have also regenerated xLODGen using the latest 127 version in case that had any impact. I'm very out of my depth knowing the best values to try in the ini so any advice would be appreciated. I've also done a health check on my cpu and memory and they don't appear to be a problem. I only purchased this pc in the summer and I have an AMD Ryzen 7 7800X3D 8-Core processor and 21.9GB available RAM Thank you so much for your help and for DynDOLOD itself. Link to comment Share on other sites More sharing options...
sheson Posted October 21 Author Share Posted October 21 58 minutes ago, m1sf1t711 said: Hi I've had a go at following all the advice given but I'm still having the same problem and noticed this error message as well so I tried the ini change for occlusion not generating: <Error: Occlusion generation aborted due to LODGen error> Here's a link to my latest logs: https://drive.google.com/file/d/1gLyHh4cYNPubAtV7dvXJSQAfSXJF6HCi/view?usp=sharing And also a link to a copy of my DynDOLOD_SSE.ini so you can see what changes I tried: https://drive.google.com/file/d/1nnSqISDbBIw8oKkyjU-8b0ddmqqHZ0es/view?usp=sharing I previously ran DynDOLOD successfully using all the same settings within the start up window as I am using now. I have also regenerated xLODGen using the latest 127 version in case that had any impact. I'm very out of my depth knowing the best values to try in the ini so any advice would be appreciated. I've also done a health check on my cpu and memory and they don't appear to be a problem. I only purchased this pc in the summer and I have an AMD Ryzen 7 7800X3D 8-Core processor and 21.9GB available RAM Thank you so much for your help and for DynDOLOD itself. Since occlusion can not be generated when object LOD meshes generation fails, there are no out of memory message while generating occlusion and changing the OcclusionMaxThreadsObjectLOD setting is irrelevant. It does not change anything about LODGen. The INI setting are already documented in the DynDOLOD_SSE_debug_log.txt, there is not need to upload DynDOLOD_SSE.ini. Sounds like high memory usage is not the cause. Check the Windows Event log for related messages. Stress testing the system with tools overlockers use, like xorecycler using prime95, ycruncher or occt etc. could be useful. 21.9GB is an odd number for main memory. It should be closer to a power of 2 number, since you typically have 2 or 4 memory modules a 8GB, 16GB etc. Test if using the Framework version LODGenx64.exe works better by hiding the ..\DynDOLOD\Edit Scripts\LODGenx64Win.exe. Just use expert mode and Execute LODGen for the worldspaces and seasons that failed. Link to comment Share on other sites More sharing options...
m1sf1t711 Posted October 21 Share Posted October 21 (edited) 52 minutes ago, sheson said: Since occlusion can not be generated when object LOD meshes generation fails, there are no out of memory message while generating occlusion and changing the OcclusionMaxThreadsObjectLOD setting is irrelevant. It does not change anything about LODGen. The INI setting are already documented in the DynDOLOD_SSE_debug_log.txt, there is not need to upload DynDOLOD_SSE.ini. Sounds like high memory usage is not the cause. Check the Windows Event log for related messages. Stress testing the system with tools overlockers use, like xorecycler using prime95, ycruncher or occt etc. could be useful. 21.9GB is an odd number for main memory. It should be closer to a power of 2 number, since you typically have 2 or 4 memory modules a 8GB, 16GB etc. Test if using the Framework version LODGenx64.exe works better by hiding the ..\DynDOLOD\Edit Scripts\LODGenx64Win.exe. Just use expert mode and Execute LODGen for the worldspaces and seasons that failed. Thank you I tried generating just Tamriel Seasons and it failed again: Error: LODGenx64Win.exe failed to generate object LOD for one or more worlds. Check for error messages in the listed LODGen log(s) Error: LODGenx64Win.exe failed to generate object LOD for Tamriel AUT. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_AUT_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SPR. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SPR_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SUM. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SUM_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel WIN. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_WIN_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_log.txt I've had a look in the Windows Event Log and these are the reports for this attempt: https://docs.google.com/document/d/1dvUqsUPrqXy7oEcPL8ju1w90fCUPuE_SHlc0KomJKqo/edit?usp=sharing Does that help at all? I'm not technical enough to really know what they are telling me, sorry :/ Sorry I also wasn't sure how to hide ..\DynDOLOD\Edit Scripts\LODGenx64Win.exe. so I haven't tried that yet. Do I just tick hidden in properties? Edited October 21 by m1sf1t711 Link to comment Share on other sites More sharing options...
sheson Posted October 21 Author Share Posted October 21 2 hours ago, m1sf1t711 said: Thank you I tried generating just Tamriel Seasons and it failed again: Error: LODGenx64Win.exe failed to generate object LOD for one or more worlds. Check for error messages in the listed LODGen log(s) Error: LODGenx64Win.exe failed to generate object LOD for Tamriel AUT. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_AUT_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SPR. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SPR_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel SUM. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_SUM_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel WIN. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_WIN_log.txt Error: LODGenx64Win.exe failed to generate object LOD for Tamriel. LODGenx64Win.exe returned C0000005. Check C:\DynDOLOD\Logs\LODGen_SSE_Tamriel_log.txt I've had a look in the Windows Event Log and these are the reports for this attempt: https://docs.google.com/document/d/1dvUqsUPrqXy7oEcPL8ju1w90fCUPuE_SHlc0KomJKqo/edit?usp=sharing Does that help at all? I'm not technical enough to really know what they are telling me, sorry :/ Sorry I also wasn't sure how to hide ..\DynDOLOD\Edit Scripts\LODGenx64Win.exe. so I haven't tried that yet. Do I just tick hidden in properties? By hiding I mean something like moving it out of the folder or renaming it to LODGenx64Win.bak for example. Make sure antivir is not interfering by temporality disabling or adding exceptions. Reinstall or repair .NET6 If neither works, upload the files mentioned from the last event log entry, e.g. C:\ProgramData\Microsoft\Windows\WER\Temp\WER.b742fef1-151c-4b46-8353-6e3f9a08266a.tmp.dmp C:\ProgramData\Microsoft\Windows\WER\Temp\WER.0820b4dd-3d78-4c5a-b818-0e6721cbf5f0.tmp.WERInternalMetadata.xml etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now