Jadeath Posted August 6, 2023 Share Posted August 6, 2023 (edited) https://ufile.io/c7a7anp3 https://ufile.io/cty4rede Edited August 6, 2023 by Jadeath Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 1 hour ago, Jadeath said: https://ufile.io/c7a7anp3 https://ufile.io/cty4rede Thanks. Download this test version of DynDOLODx64.exe https://mega.nz/file/oUZi2JDA#e0mpNTqTcSaZQRpL1U0CrxkN-4W0rvSUhf---qUqycA See if it runs through without the error. If not, upload new bugreport.txt, log and debug log. Link to comment Share on other sites More sharing options...
xbk123 Posted August 6, 2023 Share Posted August 6, 2023 Hi. Whats the best default settings for these new options - Child > Parent/Parent > Child with the aim to replace functionality of patches from dyndolod resources (exteriors visible from whiterun/solitude/other cities cities)? Enable/tick 1st and medium/high settings for 2nd? Thanks. Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 43 minutes ago, xbk123 said: Hi. Whats the best default settings for these new options - Child > Parent/Parent > Child with the aim to replace functionality of patches from dyndolod resources (exteriors visible from whiterun/solitude/other cities cities)? Enable/tick 1st and medium/high settings for 2nd? Thanks. Child > Parent "Low" is the old default that just happened automatically. "Medium" will take care of trees in cities. Vanilla Riften has some aspens that are then visible, so I'd use that. Parent > Child Since it replaces the Whiterun and Solitude Exterior patches from older DynDOLOD Resources, enable that check box if you are interested in proper surroundings and used those patches before. Especially helpful for Whiterun, Riften and Solitude if you use mods like Legacy of the Dragenborn where you can actually see outside. Do not use if performance is more important and then just don't peak outside. If large reference bugs workarounds is used, you can disable large references in child worlds from the SkyUI MCM to regain a bit of performance. Make sure to read https://dyndolod.info/Help/Child-Parent-Worldspace-Copies if controlling things individually for a specific child world is needed. Link to comment Share on other sites More sharing options...
metaltortoise88 Posted August 6, 2023 Share Posted August 6, 2023 This is the issue I'm having: https://i.imgur.com/QLiRDh7.png I love Nature of the Wildlands, but the LODs are looking pretty bad. It comes with 3d lods, which I made sure were installed before running texgen/dyndolod. The shadows on the trees are what stand out the most to me. They just don't look right. It's not that noticeable a lot of the time, but when the weather is sunny and clear and I'm in an open area, it sticks out like a sore thumb. I've used Dyndolod quite a bit, but I'm no expert on the matter, so maybe my settings are garbage. My Texgen settings: https://i.imgur.com/DQVottJ.png My Dyndolod settings: https://i.imgur.com/rP6hGy3.png Any help would be greatly appreciated! Link to comment Share on other sites More sharing options...
Pahn_Duh Posted August 6, 2023 Share Posted August 6, 2023 11 hours ago, sheson said: Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log, debug log and the lodgen logs for which the error occured to upload. Also see https://dyndolod.info/Help/LODGen for some suggestions about error code E0434352. Post related Windows Event log messages. See https://dyndolod.info/Messages and https://dyndolod.info/Help/Summary-Of-Messages for explanations of certain messages. From https://dyndolod.info/Generation-Instructions Wait for all processes including all spawned LODGen command prompt windows to complete successfully. Pay attention to all log messages. It should end with the log message 'DynDOLOD plugins generated successfully' and lines like 'LODGen generated object LOD for [WORLDSPACE] successfully' for each selected worldspace. Do not use the output if there were errors that stopped the process prematurely. Thanks for the copy and pasted response (as if I haven't read all of these resources and referenced them in my post). After many hours of troubleshooting, I've found out that disabling one of my merges allows Dyndolod to complete. Currently troubleshooting to see exactly why that is, what mod in that merge is the issue, or if the issue is simply the merge itself. Will upload logs if I can't figure it out. Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 1 hour ago, Pahn_Duh said: Thanks for the copy and pasted response (as if I haven't read all of these resources and referenced them in my post). After many hours of troubleshooting, I've found out that disabling one of my merges allows Dyndolod to complete. Currently troubleshooting to see exactly why that is, what mod in that merge is the issue, or if the issue is simply the merge itself. Will upload logs if I can't figure it out. That means the request to upload the logs, debug log, lodgen log and windows event log was ignored twice. Do not ask what to do if there is no intentions doing it. Logs contain actual information that can help with identifying causes of problems or at least help with giving better troubleshooting suggestions. That means you knew not to use the incomplete output but tried it anyway. That means you mention that you searched the forum but forgot to mention you read stuff on the website. You get responses according to the information provided. LODGen generates object LOD from NIFs. Either loose files or from BSAs. So maybe a NIF or BSA is part of the problem. Removing mods either removes the need to use a NIF or BSA and/or the files themselves. However, the error code is not "normal" problem with assets or coding errors, but typically an underlying issue with the OS, .Net or used libraries, hardware maybe etc. So troubleshooting mods is typically not really going to help fixing the problems, other than just to avoid the situation altogether. Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 2 hours ago, metaltortoise88 said: This is the issue I'm having: https://i.imgur.com/QLiRDh7.png I love Nature of the Wildlands, but the LODs are looking pretty bad. It comes with 3d lods, which I made sure were installed before running texgen/dyndolod. The shadows on the trees are what stand out the most to me. They just don't look right. It's not that noticeable a lot of the time, but when the weather is sunny and clear and I'm in an open area, it sticks out like a sore thumb. I've used Dyndolod quite a bit, but I'm no expert on the matter, so maybe my settings are garbage. My Texgen settings: https://i.imgur.com/DQVottJ.png My Dyndolod settings: https://i.imgur.com/rP6hGy3.png Any help would be greatly appreciated! Moved to the DynDOLOD 3 Alpha thread. Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log and debug log to upload. Billboard tree LOD happens either as fallback because 3D tree LOD models are not found or because the tree mesh mask rule defines Billboard for LOD Level 4. See https://dyndolod.info/Help/Ultra-Tree-LOD#Generating By default LOD does not receive or cast shadows. Which means you are probably using ENB distance shadows. They will work better with actual 3D tree LODs. Link to comment Share on other sites More sharing options...
Jadeath Posted August 6, 2023 Share Posted August 6, 2023 Same Integer Overflow error with test version... https://ufile.io/6yh8xvl6 https://ufile.io/nyq7mkxk https://ufile.io/r6qrssct Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 27 minutes ago, Jadeath said: Same Integer Overflow error with test version... https://ufile.io/6yh8xvl6 https://ufile.io/nyq7mkxk https://ufile.io/r6qrssct Thanks! See what happens with this test version. https://mega.nz/file/hYBh0J7Y#e0mpNTqTcSaZQRpL1U0CrxkN-4W0rvSUhf---qUqycA Link to comment Share on other sites More sharing options...
PurpleYellowRosa Posted August 6, 2023 Share Posted August 6, 2023 The process runs for about 42 minutes, then bugs out after finishing Object LOD for Tamriel (and seasons). It's likely from a mod I installed, since the error happens on multiple DynDOLOD versions, I'm just having trouble identifying exactly which mod. My last successful run was two days ago, so potentially I could binary test it, but I'd prefer to try to document the process and actually "solve" what's causing it. My debug log is about 840 MB, so I'm attaching the final section in hopes that it can help. Quote [20:06] [DoObjectLOD] <Debug: Adding mini atlasses 268 616> [20:06] [SaveAtlasMap] <Debug: Saving C:\DynDOLOD\Edit Scripts\Export\LODGen_SSE_ObjectAtlasMap_DLC2SolstheimWorld.txt> [20:06] [SaveList] <Debug: Saving C:\DynDOLOD\Edit Scripts\Export\LODGen_SSE_ObjectAtlasMap_DLC2SolstheimWorld.txt> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC -268367539 131072> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC -268367539 65538> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC -268367539 65538> [21:23] [TwbRender.MakeCurrent] <Debug: Enter MC 0 0> [21:23] [TwbRender.MakeCurrent] <Debug: Leave MC 0 0> [20:06] Waiting for LODGenx64.exe generating object LOD for Tamriel AUT. [36:54] LODGenx64.exe generated object LOD for Tamriel AUT successfully [36:54] Waiting for LODGenx64.exe generating object LOD for Tamriel SUM. [42:49] [WriteSummaries] <Debug: "Deleted Reference;https://dyndolod.info/Messages/Deleted-Reference","File Not Found Meshes;https://dyndolod.info/Messages/File-Not-Found-Meshes","File Not Found Scripts;https://dyndolod.info/Messages/File-Not-Found-Scripts","File Not Found Textures;https://dyndolod.info/Messages/File-Not-Found-Textures","Invalid Script;https://dyndolod.info/Messages/Invalid-Script","Large Reference Bugs;https://dyndolod.info/Messages/Large-Reference-Bugs","Potentially Wild Edit Reference;https://dyndolod.info/Messages/Potentially-Wild-Edit-Reference","Property Not Found In Scripts;https://dyndolod.info/Messages/Property-Not-Found-In-Scripts","Root Block;https://dyndolod.info/Messages/Root-Block","Textures Do Not Match;https://dyndolod.info/Messages/Textures-Do-Not-Match"> [42:49] LODGenx64.exe generated object LOD for Tamriel SUM successfully [42:49] LODGenx64.exe generated object LOD for Tamriel SPR successfully [42:49] LODGenx64.exe generated object LOD for Tamriel WIN successfully [42:49] LODGenx64.exe generated object LOD for Tamriel successfully [42:49] Created a summary of log messages C:\DynDOLOD\Summary\DynDOLOD_Index.html. [42:52] 00000000 ??? 01004267 DynDOLODx64.exe DynDOLODResourceStrings 909 dynMessageDialog 00ffad6a DynDOLODx64.exe xeMainForm 21309 TLODGenThread.Execute 005dda80 DynDOLODx64.exe System.Classes ThreadProc 0042a465 DynDOLODx64.exe BrainMM 2540 BrainMMThreadProxy 0041214a DynDOLODx64.exe System ThreadWrapper 00511709 DynDOLODx64.exe madExcept ThreadExceptFrame 7fface68 KERNEL32.DLL BaseThreadInitThunk 7ffad03e ntdll.dll RtlUserThreadStart [42:52] [TMessageDialog.Dialog] <Debug: Creating TTaskDialog> [42:52] [TMessageDialog.Dialog] <Debug: [TMessageDialog.Dialog] Executing TTaskDialog> Range check error Error: Range check error. [44:10] [TMessageDialog.Dialog] <Debug: Gathering> User says "Exit DynDOLOD" Forced Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 11 minutes ago, PurpleYellowRosa said: The process runs for about 42 minutes, then bugs out after finishing Object LOD for Tamriel (and seasons). It's likely from a mod I installed, since the error happens on multiple DynDOLOD versions, I'm just having trouble identifying exactly which mod. My last successful run was two days ago, so potentially I could binary test it, but I'd prefer to try to document the process and actually "solve" what's causing it. My debug log is about 840 MB, so I'm attaching the final section in hopes that it can help. Moved to the DynDOLOD 3 Alpha thread. See the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire log for the session, debug log and bugreport.txt to upload and how to zip and use a file service for large files. As explained at https://dyndolod.info/Messages/Exceptions#Range-check-error, this is a problem that needs to be fixed in the tools. Link to comment Share on other sites More sharing options...
Jadeath Posted August 6, 2023 Share Posted August 6, 2023 Same Integer Overflow error unfortunately however I notice I am getting it much sooner now, like 3 minutes in. https://ufile.io/b3oc1czk https://ufile.io/h3taxvhn https://ufile.io/hgsykhxy Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 3 minutes ago, Jadeath said: Same Integer Overflow error unfortunately however I notice I am getting it much sooner now, like 3 minutes in. https://ufile.io/b3oc1czk https://ufile.io/h3taxvhn https://ufile.io/hgsykhxy Thank again! Try this one https://mega.nz/file/1d5TnAIK#2cDWdSG0hFDYawTXUDaqp3wnB9ezbxIZ3vudTvSCHO0 Link to comment Share on other sites More sharing options...
Jadeath Posted August 6, 2023 Share Posted August 6, 2023 Same result I'm afraid: https://ufile.io/f3czpl0r https://ufile.io/6oz9cg5f https://ufile.io/o2cfk3sv Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now