megablackk1d Posted August 5, 2023 Share Posted August 5, 2023 8 hours ago, sheson said: Are you able to delete the incomplete output before trying again? If that is the case, try with this test version of DynDOLODx64.exe https://mega.nz/file/4BQk3C7Z#cHinjlNTRVcUyG4jL5zhFz32bf4eCbsk7IE_E612cEI If problem persists upload new log, debug and bugreport.txt. Ok I tried the new exe, and it never got past 6 minutes before it would hang, and do nothing for hours. So I reverted back and once again I get the same error message no matter what. I just want to say thanks for the help, but I have been at this for a week now haha. I think I may just continue to play without it like I have been for all these years. You made a great program by the way, I don't think it's meant to be. For me at least. Here are the files you asked for anyway. The debug file was 300mb so I couldn't upload it here. Here is the link to the debug file https://www.mediafire.com/file/8ewcfg0077vgmzg/DynDOLOD_SSE_Debug_log.txt/file. Again thanks for the help! bugreport.txt DynDOLOD_SSE_log.txt Well I unticked beyond reach from creation lod's and it worked. I was able to complete it. Link to comment Share on other sites More sharing options...
Spike2112 Posted August 5, 2023 Share Posted August 5, 2023 Hi, using Alpha 130. I have never had this problem before. Xlodgen fine, Texgen fine, No error summary. Then I go to install DynDOLOD Outputzip and I get Extraction failed:CRC error. This is in MO2. No other mod nor have yours ever done this. To test I disabled almost all my mods and I still get the error. Any ideas? Thanks Link to comment Share on other sites More sharing options...
sheson Posted August 5, 2023 Author Share Posted August 5, 2023 15 hours ago, megablackk1d said: Ok I tried the new exe, and it never got past 6 minutes before it would hang, and do nothing for hours. So I reverted back and once again I get the same error message no matter what. I just want to say thanks for the help, but I have been at this for a week now haha. I think I may just continue to play without it like I have been for all these years. You made a great program by the way, I don't think it's meant to be. For me at least. Here are the files you asked for anyway. The debug file was 300mb so I couldn't upload it here. Here is the link to the debug file https://www.mediafire.com/file/8ewcfg0077vgmzg/DynDOLOD_SSE_Debug_log.txt/file. Again thanks for the help! bugreport.txt 511.68 kB · 1 download DynDOLOD_SSE_log.txt 830.03 kB · 1 download Well I unticked beyond reach from creation lod's and it worked. I was able to complete it. For future reference, do not post screenshots of message, use the 'Copy message to clipboard' link instead and post the text. https://dyndolod.info/Official-DynDOLOD-Support-Forum#Copy-and-Paste-Text See if you have more luck with this test version https://mega.nz/file/oUZi2JDA#e0mpNTqTcSaZQRpL1U0CrxkN-4W0rvSUhf---qUqycA Upload new log, debug log, bugereport.txt in case it has an error. If it stalls, check task manager for stuck texconv processors and kill them top get it to have an error. It is normal that when something that has an error is not done, the error is not happening. Kind of like staying in bed to not have accidents outside. Link to comment Share on other sites More sharing options...
megablackk1d Posted August 5, 2023 Share Posted August 5, 2023 14 hours ago, sheson said: For future reference, do not post screenshots of message, use the 'Copy message to clipboard' link instead and post the text. https://dyndolod.info/Official-DynDOLOD-Support-Forum#Copy-and-Paste-Text See if you have more luck with this test version https://mega.nz/file/oUZi2JDA#e0mpNTqTcSaZQRpL1U0CrxkN-4W0rvSUhf---qUqycA Upload new log, debug log, bugereport.txt in case it has an error. If it stalls, check task manager for stuck texconv processors and kill them top get it to have an error. It is normal that when something that has an error is not done, the error is not happening. Kind of like staying in bed to not have accidents outside. Sorry I didn't know. I'm very new here. But Dyndolod finally finished when I ticked everything except for beyond reach. Link to comment Share on other sites More sharing options...
sheson Posted August 5, 2023 Author Share Posted August 5, 2023 4 minutes ago, megablackk1d said: Sorry I didn't know. I'm very new here. But Dyndolod finally finished when I ticked everything except for beyond reach. Avoiding the problem is not fixing the problem. The worldspace will not have updated LOD. Hence the new test version. Link to comment Share on other sites More sharing options...
megablackk1d Posted August 5, 2023 Share Posted August 5, 2023 3 minutes ago, sheson said: Avoiding the problem is not fixing the problem. The worldspace will not have updated LOD. Hence the new test version. Ok thanks I'll try running it soon, but I'd be ok if it's just Beyond Reach that doesn't have the lods if it doesn't work. I will get back to you. Link to comment Share on other sites More sharing options...
sheson Posted August 5, 2023 Author Share Posted August 5, 2023 1 hour ago, Spike2112 said: Hi, using Alpha 130. I have never had this problem before. Xlodgen fine, Texgen fine, No error summary. Then I go to install DynDOLOD Outputzip and I get Extraction failed:CRC error. This is in MO2. No other mod nor have yours ever done this. To test I disabled almost all my mods and I still get the error. Any ideas? Thanks Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log and debug log to upload. The entire content of the output folder is compressed with the official ..\DynDOLOD\Edit Scripts\7z64.dll once all output has been generated. Mods should not in any way be able to affect this. Make sure the drive has enough free space. Make sure UAC, anitvir are not interfering. Link to comment Share on other sites More sharing options...
Pahn_Duh Posted August 5, 2023 Share Posted August 5, 2023 Hope this is the right place to look for help... I'm at a loss. I keep getting the error code E0434352 which indicates the .Net framework isn't installed or working properly. I've search all throughout these forums, and supposedly it can be related to not having access to the files? I currently have Dyndolod installed on a second drive near the root, so I'm not sure this is the issue. I've tried to reinstall .Net 4.8 but it says I already have it installed. I also have .Net 6.0.20 installed, and that's what appears in the logs. I also noticed a ton of error and warning messages while running Dyndolod, but the only error message to pop up preventing me from finishing is "failed to generate for one or more world" or whatever. After getting this error, I can zip and install as if it all worked, but none of the LODs are there or working. I'm at a loss. I literally have no clue what to do. Error code says there's issues with .Net, so I've tried uninstalling and reinstalling and using the repair tools, yet it still won't work. What am I doing wrong? Link to comment Share on other sites More sharing options...
Jadeath Posted August 5, 2023 Share Posted August 5, 2023 (edited) I have been using Dyndolod 3 for a long time now. Was not even going to post because I thought this would have been obvious error in latest release (Alpha 130) but I don't see it posted. I'm getting integer overflow (popup window) error running Dyndolod right when it's about to do it's thing (about 7 minutes in) and looks like it's happening when generating log? I can provide more info so let me know in reply if you are not aware of this. I will need to re-run and get relevant info. This is reproducible (I did 3 times). Never had any issue with any previous version. Went back to Aplha-128 and all good. I'm using the QHD options BTW if that matters. Edited August 5, 2023 by Jadeath Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 7 hours ago, Pahn_Duh said: Hope this is the right place to look for help... I'm at a loss. I keep getting the error code E0434352 which indicates the .Net framework isn't installed or working properly. I've search all throughout these forums, and supposedly it can be related to not having access to the files? I currently have Dyndolod installed on a second drive near the root, so I'm not sure this is the issue. I've tried to reinstall .Net 4.8 but it says I already have it installed. I also have .Net 6.0.20 installed, and that's what appears in the logs. I also noticed a ton of error and warning messages while running Dyndolod, but the only error message to pop up preventing me from finishing is "failed to generate for one or more world" or whatever. After getting this error, I can zip and install as if it all worked, but none of the LODs are there or working. I'm at a loss. I literally have no clue what to do. Error code says there's issues with .Net, so I've tried uninstalling and reinstalling and using the repair tools, yet it still won't work. What am I doing wrong? Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log, debug log and the lodgen logs for which the error occured to upload. Also see https://dyndolod.info/Help/LODGen for some suggestions about error code E0434352. Post related Windows Event log messages. See https://dyndolod.info/Messages and https://dyndolod.info/Help/Summary-Of-Messages for explanations of certain messages. From https://dyndolod.info/Generation-Instructions Wait for all processes including all spawned LODGen command prompt windows to complete successfully. Pay attention to all log messages. It should end with the log message 'DynDOLOD plugins generated successfully' and lines like 'LODGen generated object LOD for [WORLDSPACE] successfully' for each selected worldspace. Do not use the output if there were errors that stopped the process prematurely. Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 7 hours ago, Jadeath said: I have been using Dyndolod 3 for a long time now. Was not even going to post because I thought this would have been obvious error in latest release (Alpha 130) but I don't see it posted. I'm getting integer overflow (popup window) error running Dyndolod right when it's about to do it's thing (about 7 minutes in) and looks like it's happening when generating log? I can provide more info so let me know in reply if you are not aware of this. I will need to re-run and get relevant info. This is reproducible (I did 3 times). Never had any issue with any previous version. Went back to Aplha-128 and all good. I'm using the QHD options BTW if that matters. Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which log, debug and bugreport to upload when making posts. As explained on the first post and https://dyndolod.info, DynDOLOD 3 is an alpha version to test things and iron out bugs. Certain things may be incomplete, not work as expected or change considerably between versions. As explained on the first post and https://dyndolod.info/Official-DynDOLOD-Support-Forum#Read-Log-and-Error-Messages, use the Click on this link for additional explanations and help for this message to open https://dyndolod.info/Messages/Exceptions: Integer overflow Always use the latest version of DynDOLOD/TexGen as explained above. This is a bug with the tools encountering unexpected situations. Make a report with the log, debug log and bugreport.txt as explained on the official DynDOLOD support forum. Link to comment Share on other sites More sharing options...
Jadeath Posted August 6, 2023 Share Posted August 6, 2023 (edited) Wow that was tremendously helpful! Thank you so much! I have a life, your mod just making you aware. I'll use prior version TYVM. Edited August 6, 2023 by Jadeath Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 3 minutes ago, Jadeath said: Wow that was tremendously helpful! Thank you so much! Upload the log, debug log and bugreport.txt as explained to help development of the tools. See the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs Link to comment Share on other sites More sharing options...
Jadeath Posted August 6, 2023 Share Posted August 6, 2023 https://ufile.io/in3lu3zm Link to comment Share on other sites More sharing options...
sheson Posted August 6, 2023 Author Share Posted August 6, 2023 25 minutes ago, Jadeath said: https://ufile.io/in3lu3zm Thanks for the bugreport.txt. Also upload the log and debug log as explained on the post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now