sheson Posted July 25 Author Posted July 25 31 minutes ago, piper06w said: So close to having my mod setup working, but ran Dyndolod to finish things up, and I'm getting crashes in the exterior cells for Solitude. Whether I'm leaving through the main gate, walking up from dragon bridge, or just doing coc solitudeexterior01, it crashes as long as Dyndolod_output is enabled, though I'm sure other mods are at play. My crash log: SkyrimSE v1.6.1170trainwreck v1.4.0Unhandled exception "EXCEPTION_ACCESS_V - Pastebin.com Texgen Log: https://ufile.io/xz3um8az Texgen Debug Log: https://ufile.io/f8eihc5k DyndoLod Log: https://ufile.io/zzrkzvnj Dyndolod debug log: https://ufile.io/50u976ru I'm at least hoping for a little guidance in how to read all of this and try to fix it. Been working on this setup for a a little too long, and at this point I'm starting to run out of willpower. Use crash logger as explained at https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs to produce a better and more useful crash log and upload that.
piper06w Posted July 25 Posted July 25 (edited) Welp, using the wrong crash logger would certainly help to explain why I've been having issues diagnosing it. Revised crashlog: Skyrim SSE v1.6.1170CrashLoggerSSE v1-14-1-0 May 18 2024 23:00:58Unhandled - Pastebin.com In file form: https://ufile.io/dms7yw8s Edited July 25 by piper06w
sheson Posted July 25 Author Posted July 25 17 hours ago, piper06w said: Welp, using the wrong crash logger would certainly help to explain why I've been having issues diagnosing it. Revised crashlog: Skyrim SSE v1.6.1170CrashLoggerSSE v1-14-1-0 May 18 2024 23:00:58Unhandled - Pastebin.com In file form: https://ufile.io/dms7yw8s Download this version of DynDOLOD DLL NG and test if it works with this one. https://mega.nz/file/EMIzDZhS#0I1Rc1K5bJo86E1s2Gz4IJB3rIoJlQhZ6kqbXpfJIZA Do some fast travel and load doors in the solitude area and anywhere else to test if it really does not crash anymore. Otherwise upload a new crash log.
piper06w Posted July 25 Posted July 25 Seems to be working at a cursory glance. Will check more later tonight when I have a bit more time to be thorough. Thank you!
Nzymia Posted July 26 Posted July 26 Hi! After running Dyndolod Alpha 173 which as far as I can see finished successfully, Loot reports a cyclic interaction between Project Rainforest.esp [Master Flag] and Dyndolod.esm [Master]. Dyndolod_SSE.log and the Dyndolod.esm are available at the link. https://drive.google.com/drive/folders/1awW_aQRQ0--dGKfPJSpw0skT2qGVwiMl?usp=drive_link Thank you for your help in advance. Best regards Nzymia
sheson Posted July 26 Author Posted July 26 50 minutes ago, Nzymia said: Hi! After running Dyndolod Alpha 173 which as far as I can see finished successfully, Loot reports a cyclic interaction between Project Rainforest.esp [Master Flag] and Dyndolod.esm [Master]. Dyndolod_SSE.log and the Dyndolod.esm are available at the link. https://drive.google.com/drive/folders/1awW_aQRQ0--dGKfPJSpw0skT2qGVwiMl?usp=drive_link Thank you for your help in advance. Best regards Nzymia The link asks me to login. Also upload the DynDOLOD debug log as explained in the first post and https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs
Nzymia Posted July 26 Posted July 26 I have uploaded the debug log and (hopefully) fixed access to the files. /Nzymia Ooops, and here is the updated link: https://drive.google.com/drive/folders/1awW_aQRQ0--dGKfPJSpw0skT2qGVwiMl?usp=sharing
sheson Posted July 26 Author Posted July 26 48 minutes ago, Nzymia said: I have uploaded the debug log and (hopefully) fixed access to the files. /Nzymia Ooops, and here is the updated link: https://drive.google.com/drive/folders/1awW_aQRQ0--dGKfPJSpw0skT2qGVwiMl?usp=sharing Load the entire load order pre DynDOLOD generation (e.g. without the DynDOLOD output enabled) into xEdit. Enter the form ID 00009ABE into the FormID field top left and press Enter to load up the cell record. Upload screenshot(s) that show the entire record from left to right and top to bottom (does not show the entirely empty rows at the bottom). You can then load DynDOLOD.esm into xEdit and just delete that cell from it, clean masters and it and everything should work.
Nzymia Posted July 26 Posted July 26 Yes, that removed Project Rainforest.esp as a master from Dyndolod.esm. Would you mind to briefly explain what the problem was and how you identified the record that was the problem? And thank you very much for your help! /Nzymia Forgot to say that I have uploaded the screenshot. Here is the link: https://drive.google.com/file/d/1nHz-rCLMnuuAyFbg_rcSBvr7fbfOFhUm/view?usp=sharing
sheson Posted July 26 Author Posted July 26 1 hour ago, Nzymia said: Yes, that removed Project Rainforest.esp as a master from Dyndolod.esm. Would you mind to briefly explain what the problem was and how you identified the record that was the problem? And thank you very much for your help! /Nzymia Forgot to say that I have uploaded the screenshot. Here is the link: https://drive.google.com/file/d/1nHz-rCLMnuuAyFbg_rcSBvr7fbfOFhUm/view?usp=sharing I have no idea yet how that happened, hence the request for the screenshot so I can try to replicate. Replacing the esp with an empty dummy plugin, then error checking in xEdit for any unresolved form ID errors. I suggest to pay some attention to the warning and error messages and read their explanations and address some of the issues.
Firearch Posted July 29 Posted July 29 Hello. While working with your mod, I recently encountered this bizarre error... "Error: Can't add main record with signature REFR to top level group with signature WRLD." https://imgur.com/a/ZkoDLx7 Do you have any idea what this error means? I can't seem to find any info about it.
z929669 Posted July 29 Posted July 29 15 minutes ago, Firearch said: Hello. While working with your mod, I recently encountered this bizarre error... "Error: Can't add main record with signature REFR to top level group with signature WRLD." https://imgur.com/a/ZkoDLx7 Do you have any idea what this error means? I can't seem to find any info about it. As stated in the OP (this is no exaggeration), did you click the link in the error dialog? Click on this link for additional explanations and help for this message
sheson Posted July 29 Author Posted July 29 1 hour ago, Firearch said: Hello. While working with your mod, I recently encountered this bizarre error... "Error: Can't add main record with signature REFR to top level group with signature WRLD." https://imgur.com/a/ZkoDLx7 Do you have any idea what this error means? I can't seem to find any info about it. Read the first post and//or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire DynDOLOD log and debug log to upload when making posts. Use the Copy message to clipboard and paste the message as text instead of making a screenshot as explained in https://dyndolod.info/Official-DynDOLOD-Support-Forum#Copy-and-Paste-Text
Firearch Posted July 29 Posted July 29 12 hours ago, z929669 said: As stated in the OP (this is no exaggeration), did you click the link in the error dialog? Click on this link for additional explanations and help for this message I tried that, but the link did not open anything. I found out what went wrong, I used SSEEdit to run an error check on one of my plugins and found out it had several unexpected references. I was able to solve it by removing "World Children of 0700003C" under "Worldspace."
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now