DynDOLOD 3.00 Alpha 182

[tamrieltwo]

.

Edited November 5, 2023 by tamrieltwo
Realized what I said was wrong

[Marina]

I got it working, and I even had beautiful EVT 3d trees. So, yes, I know how to generate 3d trees with DynDOLOD 3.  However, I wanted to test Nature of the Wilds instead, which has an option for 3d trees in the FOMOD. Obviously, I checked that option, but I'm still getting 2d trees only. The author says it should work, so I'm not sure what I'm doing wrong.

logs

 

[sheson]

6 hours ago, Marina said:

I got it working, and I even had beautiful EVT 3d trees. So, yes, I know how to generate 3d trees with DynDOLOD 3. However, I wanted to test Nature of the Wilds instead, which has an option for 3d trees in the FOMOD. Obviously, I checked that option, but I'm still getting 2d trees only. The author says it should work, so I'm not sure what I'm doing wrong.

logs

https://dyndolod.info/Help/Ultra-Tree-LOD#Generating
Depending on clicking the Low, Medium or High buttons the tree mesh mask rule is populated with different defaults.

Mesh mask	tree
LOD Level 4	Billboard[1-6] Level0 for 3D tree LOD
LOD Level 8	Billboard[1-6]
LOD Level 16	Billboard[1-6]
Flags	VWD
Grid	Far LOD
Reference	Unchanged

Typically set LOD Level 4 to Level0 for 3D tree LOD.

The log shows that LOD Level 4 is set to Billboard1 instead of Level0.

[SkyKatarsis]

On 11/4/2023 at 9:07 PM, sheson said:

Предполагая, что теперь у вас есть чистый драйвер, вы можете только установить или закрыть мусорное ПО:
Удалите папку журнала. Удалить bugreport.txt. Запустите DynDOLODx64.

https:// dyndolod .info/Official- DynDOLOD -Support-Forum#Post-Logs
Журнал и журнал отладки сохраняются при завершении работы программы. Не прерывайте процесс завершения работы, чтобы он мог записать файлы журналов. Если журналы или журналы отладки отсутствуют из-за преждевременного завершения работы инструмента, проверьте журнал событий Windows на наличие соответствующих сообщений. Добавьте RealTimeLog=1 в [TexGen] или [ DynDOLOD ] в ..\ DynDOLOD \Edit Scripts\ DynDOLOD \[TexGen| DynDOLOD ]_[GAME MODE].INI соответственно. Затем запустите инструмент еще раз, чтобы в режиме реального времени создать журнал отладки в папке «Журналы» и загрузить его.

https://drive.google.com/file/d/1XTp1OZrmNJTMPKeMxzwww7kfQq1cvT3R/view?usp=sharing

I'm sending my reports.  Twice I was unable to generate lods and interrupted the frozen generation.

Afterwards I decided not to include in the generation mod Chanterelle - https://www.nexusmods.com/skyrimspecialedition/mods/32603

And I successfully generated lods twice in just over 1 hour.  I think the problem is with this mod.

I only have a problem with the black lods of willows in the swamps, which were initially generated normally, but not the last 2 times.

Для них я использую мод Unique Marsh Trees - https://www.nexusmods.com/skyrimspecialedition/mods/54479

I transferred the mesh of these willows from the mod M.O.I.S.T. - Massive Outstandingly Insane Swamp Tree - https://www.nexusmods.com/skyrimspecialedition/mods/99083 (I wrote about this mod earlier that DynDOLOD could not generate normal lods for it, I saw here that another person also wrote about it, so I took a mesh from it and transferred it to MOIST - Massive Outstandingly Insane Swamp Tree; initially it worked and the lods turned out, but with the latest generations they turn black)

I would appreciate your help.  Thank you.

 

 

I also wanted to clarify about xLODgen.  I generate terrain in it, but DynDOLOD still complains that there is none.

[sheson]

10 hours ago, SkyKatarsis said:

https://drive.google.com/file/d/1XTp1OZrmNJTMPKeMxzwww7kfQq1cvT3R/view?usp=sharing

I'm sending my reports.  Twice I was unable to generate lods and interrupted the frozen generation.

Afterwards I decided not to include in the generation mod Chanterelle - https://www.nexusmods.com/skyrimspecialedition/mods/32603

And I successfully generated lods twice in just over 1 hour.  I think the problem is with this mod.

I only have a problem with the black lods of willows in the swamps, which were initially generated normally, but not the last 2 times.

Для них я использую мод Unique Marsh Trees - https://www.nexusmods.com/skyrimspecialedition/mods/54479

I transferred the mesh of these willows from the mod M.O.I.S.T. - Massive Outstandingly Insane Swamp Tree - https://www.nexusmods.com/skyrimspecialedition/mods/99083 (I wrote about this mod earlier that DynDOLOD could not generate normal lods for it, I saw here that another person also wrote about it, so I took a mesh from it and transferred it to MOIST - Massive Outstandingly Insane Swamp Tree; initially it worked and the lods turned out, but with the latest generations they turn black)

I would appreciate your help.  Thank you.

 

 

I also wanted to clarify about xLODgen.  I generate terrain in it, but DynDOLOD still complains that there is none.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to provide useful screenshots from an affected full model and then of the LOD area for it.

You seem to reporting that the same load order and settings produced different results in the tree LOD? First they had their proper color and now they are black? The provided logs are from that generation? In that case also upload the D:\Modding\DynDOLOD 3.00-68518-Alpha-155\Logs\DynDOLOD_SSE_Tree_Report.txt from that generation.

[SkyKatarsis]

1 час назад, Шесон сказал:

Прочтите https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots версии . - , как предоставить полезные снимки экрана затронутой полной модели, а затем ее LOD

Кажется, вы сообщаете, что один и тот же порядок загрузки и настройки приводят к разным результатам в дереве LOD? Сначала у них был правильный цвет, а теперь они черные? Предоставленные логи относятся к этому поколению? В этом случае также загрузите D:\Modding\ DynDOLOD 3.00-68518-Alpha-155\Logs\DynDOLOD_SSE_Tree_Report.txt из этого поколения.

 

I've provided the latest logs.

You already have a useful screenshot, I send it again and another one.

The tree has a normal trunk, but black foliage. All the other trees look normal except this one.

https://ibb.co/nMtJZm5

https://ibb.co/ySTTZnH

https://drive.google.com/file/d/1gPsQ-7W93I-B0mESMu-HAoaU8QlBzR4C/view?usp=sharing - DynDOLOD_SSE_Tree_Report.txt

[sheson]

47 minutes ago, SkyKatarsis said:

I've provided the latest logs.

You already have a useful screenshot, I send it again and another one.

The tree has a normal trunk, but black foliage. All the other trees look normal except this one.

https://ibb.co/nMtJZm5

https://ibb.co/ySTTZnH

https://drive.google.com/file/d/1gPsQ-7W93I-B0mESMu-HAoaU8QlBzR4C/view?usp=sharing - DynDOLOD_SSE_Tree_Report.txt

Delete old TexGen log and debug log and bugreport.txt.

Start TexGen and click the Preview button for HD Tree. Change the drop down to change the preview to that full model.
If it still shows black, check the messages log, upload the new log, debug log and bugreport.txt. If there are no obvious errors, also upload the full model NIF and the full textures it uses.
If it shows OK, then generate new output with TexGen, install and update the the atlas textures with DynDOLOD.

[SkyKatarsis]

On 11/7/2023 at 12:27 PM, sheson said:

Удалите старый журнал TexGen, журнал отладки и bugreport.txt.

Запустите TexGen и нажмите кнопку «Предварительный просмотр» для HD Tree. Измените раскрывающийся список, чтобы изменить предварительный просмотр на полную модель.
Если он по-прежнему отображается черным, проверьте журнал сообщений, загрузите новый журнал, журнал отладки и bugreport.txt. Если явных ошибок нет, загрузите также полную модель NIF и полные текстуры, которые она использует.
Если он показывает «ОК», сгенерируйте новый вывод с помощью TexGen, установите и обновите текстуры атласа с помощью DynDOLOD .

https://ibb.co/vjSDh1f - preview to that full model, black.

In general, I was already tired of struggling with this and solved the problem differently.  I found a similar willow tree lod and replaced the black ones in TehGen with it, it turned out better.

 

[sheson]

26 minutes ago, SkyKatarsis said:

https://ibb.co/vjSDh1f - preview to that full model, black.

In general, I was already tired of struggling with this and solved the problem differently.  I found a similar willow tree lod and replaced the black ones in TehGen with it, it turned out better.

If it still shows black, check the messages log, upload the new log, debug log and bugreport.txt. If there are no obvious errors, also upload the full model NIF and the full textures it uses.

[leostevano]

Should've put a seatbelt warning with the new alpha.. Cut down 20+ minutes of generation time. GG Sheson 

[SkyKatarsis]

On 11/8/2023 at 8:28 PM, sheson said:

... also upload the full model NIF and the full textures it uses.

Where?

[PRieST]

Here as an example:

https://ufile.io/

[sheson]

2 hours ago, SkyKatarsis said:

Where?

A file service. Like your google drive that you used before.

[SkyKatarsis]

1 hour ago, sheson said:

A file service. Like your google drive that you used before.

Mesh and texture from this little mod (there are only 4 trees, that's Moist_ReachTree02) - https://www.nexusmods.com/skyrimspecialedition/mods/99083

[sheson]

53 minutes ago, SkyKatarsis said:

Mesh and texture from this little mod (there are only 4 trees, that's Moist_ReachTree02) - https://www.nexusmods.com/skyrimspecialedition/mods/99083

I have a really simple request that is easy to do, third time's a charm:
Upload the full model NIF and the full textures from your load order that shows black in your TexGen preview.