DynDOLOD 3.00 Alpha 198

[sheson]

5 minutes ago, KyroDragon said:

File can't be downloaded from that link for me. (No longer available)

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

[KyroDragon]

2 minutes ago, sheson said:

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

Bingo! Nothing from cmd.exe and just a window that opens and closes very quickly if I launch it from a graphical interface. However, texgenx64 now launches and runs as expected from MO2, so whatever you did seems to have solved the issue for me.

Big thumbs up for the quick help! 

[sheson]

1 minute ago, KyroDragon said:

Bingo! Nothing from cmd.exe and just a window that opens and closes very quickly if I launch it from a graphical interface. However, texgenx64 now launches and runs as expected from MO2, so whatever you did seems to have solved the issue for me.

Big thumbs up for the quick help! 

Thanks for letting us know.

[xcal68]

15 minutes ago, sheson said:

Try this link https://mega.nz/file/EZ5i2bJC#WD6o7DMH30TdS6ulDEr3_a_Ufs_87XDxU8gDKnCUgdk

That seems to have resolved it for me, too.  It started up and I was able to move forward.  Running fine in the background as I type this.

 

Edit - Finished successfully.

Edited October 8, 2023 by xcal68
Update

[sheson]

49 minutes ago, sasquatch678 said:

I have this same error. It points to a new reference each time, but there is never any actual error in the plugin. My system is stable and I have no overclock. Dyndolod SSE Debug Log available here. https://ufile.io/u9llpuis bugreport.txt

This should be hopefully fixed in DynDOLOD 3 Alpha-154

[raging987inferno]

154 solved the problem 

[MisterMorden]

Sheson, I use a mod Called M.O.I.S.T which uses BOS to swap out some trees in the Morthal area for different ones and I noticed that some of the trees which the full models weren't swapped have lod for a different tree at a distance (treepineforestdead02 for example shows as only a trunk up close but has a lod for a much larger M.O.I.S.T-added marsh tree when far away).  Here are my logs, I realize they are from alpha 153 but I don't think this was affected in the last update.

Texgen log https://drive.google.com/file/d/1XTGMwf4cbKtEepvwYr_lAdtdPEXBYLb1/view?usp=sharing

Texgen debug https://drive.google.com/file/d/1TAP5ul7OfmBhWNllqjAfYUjJwyFRaPj-/view?usp=sharing

Dyndo log https://drive.google.com/file/d/1kIYXkVCLlQf1NWI_rmAkcZLECQYogBfE/view?usp=sharing

Dyndo debug https://drive.google.com/file/d/1g6R35qtSVh-0pIHMFVbPmDHLSjOxnlFL/view?usp=sharing

[ErikSteiner]

On 10/8/2023 at 8:10 AM, sheson said:

Here is a diff of the customized texconv.cpp.

texconv.cpp.7z 3.19 kB · 1 download

Thank you. I will take a look at it. I am currently using the latest version of Texconv. You may have seen that I filed a bug report for Texconv. Texconv could not handle spaces in path names. I guess that your diff does not yet contain these changes, but your latest version of DynDOLOD does? I know your statement about "don't take other Texconv versions, but the one that comes with DynDOLOD." Don't be angry with me for that. I am currently on the trail of something where TexGen64 hangs after about an hour under Linux. As soon as I know more, I will provide logs etc. Maybe now you understand a bit my questions and my actions? In this respect, I would like to make as little work for you as possible.

[sheson]

31 minutes ago, ErikSteiner said:

Thank you. I will take a look at it. I am currently using the latest version of Texconv. You may have seen that I filed a bug report for Texconv. Texconv could not handle spaces in path names. I guess that your diff does not yet contain these changes, but your latest version of DynDOLOD does? I know your statement about "don't take other Texconv versions, but the one that comes with DynDOLOD." Don't be angry with me for that. I am currently on the trail of something where TexGen64 hangs after about an hour under Linux. As soon as I know more, I will provide logs etc. Maybe now you understand a bit my questions and my actions? In this respect, I would like to make as little work for you as possible.

Support for spaces was added with DynDOLOD 2.74 in October 2019 already. Those changes can be removed from the diff.

When using TexGen/DynDOLOD, TexConv should not be running for more than seconds, maybe a minute at most to complete converting a batch of textures.

https://dyndolod.info/Official-DynDOLOD-Support-Forum#Check-the-FAQ, https://dyndolod.info/FAQ#TexGen-DynDOLOD-stuck-while-creating-textures
Test if adding LockTexconv=1 under [TexGen|DynDOLOD] in ..\DynDOLOD\Edit Scripts\DynDOLOD\[TexGen|DynDOLOD]_[GAME MODE].INI changes anything.

[sheson]

8 hours ago, MisterMorden said:

Sheson, I use a mod Called M.O.I.S.T which uses BOS to swap out some trees in the Morthal area for different ones and I noticed that some of the trees which the full models weren't swapped have lod for a different tree at a distance (treepineforestdead02 for example shows as only a trunk up close but has a lod for a much larger M.O.I.S.T-added marsh tree when far away).  Here are my logs, I realize they are from alpha 153 but I don't think this was affected in the last update.

Texgen log https://drive.google.com/file/d/1XTGMwf4cbKtEepvwYr_lAdtdPEXBYLb1/view?usp=sharing

Texgen debug https://drive.google.com/file/d/1TAP5ul7OfmBhWNllqjAfYUjJwyFRaPj-/view?usp=sharing

Dyndo log https://drive.google.com/file/d/1kIYXkVCLlQf1NWI_rmAkcZLECQYogBfE/view?usp=sharing

Dyndo debug https://drive.google.com/file/d/1g6R35qtSVh-0pIHMFVbPmDHLSjOxnlFL/view?usp=sharing

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to provide useful screenshots with more informative console or provide a reference form id in text.

Also upload ..\DynDOLOD\Logs\DynDOLOD_SSE_Tree_Report.txt

[MisterMorden]

5 hours ago, sheson said:

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to provide useful screenshots with more informative console or provide a reference form id in text.

Also upload ..\DynDOLOD\Logs\DynDOLOD_SSE_Tree_Report.txt

Ok apparently I was wrong about which trees were changing...it seems to be treereachtree01.  Here are some screens and my tree report file.

Tree report https://ufile.io/jb8lp2x8

Screenshots https://imgur.com/a/rCf5cxs

Thank you!

[Althro]

154 does appear to have fixed my issue as well

[sheson]

2 hours ago, MisterMorden said:

Ok apparently I was wrong about which trees were changing...it seems to be treereachtree01.  Here are some screens and my tree report file.

Tree report https://ufile.io/jb8lp2x8

Screenshots https://imgur.com/a/rCf5cxs

Thank you!

Looks like the mod is not working and the full models are not being swapped. 

000A9E65 and 0002D49F should be using the model Moist_RreachTree01.nif

What are the changes made to the base record by DynDOLOD.esp?

[MisterMorden]

7 minutes ago, sheson said:

Looks like the mod is not working and the full models are not being swapped. 

000A9E65 and 0002D49F should be using the model Moist_RreachTree01.nif

What are the changes made to the base record by DynDOLOD.esp?

I'll look at them in xedit when I get home this evening and get screenshots

Edit - Ahhh, I'm now recalling that I made a change in the swap file for this mod because some of the trees were clipping but since I didn't edit the esp dyndolod must still be creating those lods...I notice in one of my screenshots another tree has different lod than it should and you saying the mod wasn't working sparked the memory.  I'm going to try reinstalling M.O.I.S.T. and regenerating as well and see if things change.

Edited October 9, 2023 by MisterMorden

[EnderProtix]

On 10/7/2023 at 1:24 PM, sheson said:

Moved to the DynDOLOD 3 Alpha thread.

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which LODGen log and DynDOLOD log and debug log to upload when making posts.

https://dyndolod.info/Forum#Use-Search

See posts above how to delete or move LODGenx64Win.exe so that LODGenx64.exe is used instead.

https://stepmodifications.org/forum/topic/17510-dyndolod-300-alpha-152/?do=findComment&comment=274757

Hey, sorry for the delayed response on this, was sick the past few days and just got a chance to check it. I thought I had attached the logs, but it was fairly late when I made the post, so I must have forgotten, sorry about that. As for the generation issue, switch to LODGenx64.exe remedied the problem. Thanks for your help!