DynDOLOD 3.00 Alpha 198

[sheson]

@Ran

DynDOLOD DLL NG and Scripts 3 Alpha-9 should now work with Skyrim VR also.

[MuitaPaz]

Hello, I'm using the DynDOLOD 3.0 132 and most of the places in-game seems to be working fine, except in Riften. It's just these two floating hanging walls near the back gate (I'm using JK's Skyrim and Northern Roads, but they're fine when Dyn is disabled). 

https://imgur.com/a/m9DltLX

A hint of what is causing this issue will be much appreciated! I think my load order needs some tweaks tho, here it is:
https://paste.ee/p/DkAtW

DynDOLOD_SSE_Debug_log:
https://drive.google.com/file/d/1vHUzsNKXI5yh2Xk6zWBBw_Z-mUohQkAa/view?usp=sharing

[sheson]

1 hour ago, MuitaPaz said:

Hello, I'm using the DynDOLOD 3.0 132 and most of the places in-game seems to be working fine, except in Riften. It's just these two floating hanging walls near the back gate (I'm using JK's Skyrim and Northern Roads, but they're fine when Dyn is disabled). 

https://imgur.com/a/m9DltLX

A hint of what is causing this issue will be much appreciated! I think my load order needs some tweaks tho, here it is:
https://paste.ee/p/DkAtW

DynDOLOD_SSE_Debug_log:
https://drive.google.com/file/d/1vHUzsNKXI5yh2Xk6zWBBw_Z-mUohQkAa/view?usp=sharing

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which normal DynDOLOD log to also upload.
Also upload F:\Mods\Skyrim\DynDOLOD\Logs\DynDOLOD_SSE_ChildworldCopies_Tamriel.txt

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make screenshots that contain information about the objects. As explained, if the references are added by a DynDOLOD plugin, also look up the form ID in xEdit to get the Editor ID of the reference(s) in case it is not shown in the screenshot.

[z929669]

19 hours ago, z929669 said:

The latest alpha 132 runs without issue for the latest Step dev build, and the results look good after some brief testing.

• Using DynDOLOD DLL NG
• Selected Parent > Child

I did not notice any performance hit using Parent > Child either inside Whiterun or outside the gates (similar performance to previous alphas on my system). I'll try Child > Parent at some point to confirm. I believe the doc says the 'Low' setting is effectively what applied in previous alphas, so I will test High & Low at some point for performance/quality comparison.

Logs for reference if anyone is interested.

 

I tested Parent > Child, Child > Parent (High), and Child > Parent (Low) with all else being exactly the same, and I saw no perceptible FPS performance difference among the three either inside Whiterun or outside the walls looking into Whiterun.

I did notice minor stuttering with parent > Child after exiting Breezehome inside WR, but it stopped within a few seconds and never returned (probably an anomaly or initialization lag that may or may not be related to this difference.

I didn't notice any visual differences, but I did not do a detailed analysis on that with screen compares.

[Ran]

Thanks!  
 

I just tried NG 9 and it worked, able to boot up and rebuild LOD. 
 

 

[sheson]

On 8/11/2023 at 8:28 PM, z929669 said:

I tested Parent > Child, Child > Parent (High), and Child > Parent (Low) with all else being exactly the same, and I saw no perceptible FPS performance difference among the three either inside Whiterun or outside the walls looking into Whiterun.

I did notice minor stuttering with parent > Child after exiting Breezehome inside WR, but it stopped within a few seconds and never returned (probably an anomaly or initialization lag that may or may not be related to this difference.

I didn't notice any visual differences, but I did not do a detailed analysis on that with screen compares.

The visual differences between medium and high will be minimal, depends on city, too. You can always remove more items from the ignore list for a specific city to get more stuff into the parent world, but most of the things will be low on the ground and only visible when airborne/high ground. In case of using a flying/glider mod using open/exterior cities seems to make more sense for the full experience.

[MuitaPaz]

5 hours ago, sheson said:

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which normal DynDOLOD log to also upload.
Also upload F:\Mods\Skyrim\DynDOLOD\Logs\DynDOLOD_SSE_ChildworldCopies_Tamriel.txt

See https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make screenshots that contain information about the objects. As explained, if the references are added by a DynDOLOD plugin, also look up the form ID in xEdit to get the Editor ID of the reference(s) in case it is not shown in the screenshot.

Sorry, I forgot about the other logs.

DynDOLOD_SSE_ChildworldCopies_Tamriel.txt

All the logs in the Logs folder:
https://drive.google.com/file/d/1M6aA54nJaXYHeIGihd80Xuxjzs_nMqjg/view?usp=sharing

I'm still learning how to use SSEEdit, but here it is! I hope this can help in any way:
https://imgur.com/a/DNelwKx

 

[sheson]

9 hours ago, MuitaPaz said:

Sorry, I forgot about the other logs.

DynDOLOD_SSE_ChildworldCopies_Tamriel.txt

All the logs in the Logs folder:
https://drive.google.com/file/d/1M6aA54nJaXYHeIGihd80Xuxjzs_nMqjg/view?usp=sharing

I'm still learning how to use SSEEdit, but here it is! I hope this can help in any way:
https://imgur.com/a/DNelwKx
 

Thanks, that is exactly what was needed.

This is fixed in Alpha-133.

If you do not want to generate LOD to update this right away, you can remove the reference from the plugin with xEdit by just right clicking their entries in the left tree view or by right clicking the plugin name in the top row in the right window and then selecting "Remove". Then close and save the plugin.

[DarkladyLexy]

After running DynDOLOD, my windmills have two blades. I use https://www.nexusmods.com/skyrimspecialedition/mods/28261, but since it don't contain an ESP DynDOLOD doesn't know it is there and adding a second pair of the blade to Windmills.

DynDOLOD_SSE_log.txt bugreport.txt

[sheson]

18 minutes ago, DarkladyLexy said:

After running DynDOLOD, my windmills have two blades. I use https://www.nexusmods.com/skyrimspecialedition/mods/28261, but since it don't contain an ESP DynDOLOD doesn't know it is there and adding a second pair of the blade to Windmills.

DynDOLOD_SSE_log.txt 3.34 MB · 1 download bugreport.txt 837.33 kB · 1 download

Both log from Alpha-128 and the bugreport.txt appear to be old ones from past months?

I assume you are using the latest Alpha-133 but somehow uploaded an old logs. Upload the log and also the debug from the generation that is used in the screenshot.

FormID 0005c854 is supposed to be "deleted" by a DynDOLOD plugin. Probably a bug with the manual patch file included in the latest alpha.

The mesh being replaced is most likely irrelevant for the duplication.

[AenSeidhe]

when i update dyndolod how do i use the settings before updating?

To update dyndolod do i delete the whole folder or i replace the files

Edited August 14, 2023 by AenSeidhe

[sheson]

5 minutes ago, AenSeidhe said:

when i update dyndolod how do i use the settings before updating?

To update dyndolod do i delete the whole folder or i replace the files

That depends if you want to update an existing output or generate a new from scratch, if I understand the question right.

Ask specific questions if something is left unclear after reading the explanations at https://dyndolod.info/Updating and https://dyndolod.info/Help/Clean-Save if links to.

[AenSeidhe]

Just now, sheson said:

That depends if you want to update an existing output or generate a new from scratch, if I understand the question right.

Ask specific questions if something is left unclear after reading the explanations at https://dyndolod.info/Updating and https://dyndolod.info/Help/Clean-Save if links to.

i meant when i download new dyndolod file from nexus do i delete the old dyndolod version or replace it with the new one and when i use new dyndolod version how i use the settings from previous version without everytime changing it when using a new version

[sheson]

2 minutes ago, AenSeidhe said:

i meant when i download new dyndolod file from nexus do i delete the old dyndolod version or replace it with the new one and when i use new dyndolod version how i use the settings from previous version without everytime changing it when using a new version

https://dyndolod.info/Updating#New-DynDOLOD-Version
Always install DynDOLOD Standalone into a new or empty folder. Always replace old DynDOLOD Resources.

Click to the advanced mode and save the preset. https://dyndolod.info/Help/Advanced-Mode:
Use the Save preset and Load preset buttons to save custom rules for later use.

Save to a folder outside the DynDLOD installation to keep the preset file, so you can load it with the new version.

[DarkladyLexy]

1 hour ago, sheson said:

Both log from Alpha-128 and the bugreport.txt appear to be old ones from past months?

I assume you are using the latest Alpha-133 but somehow uploaded an old logs. Upload the log and also the debug from the generation that is used in the screenshot.

FormID 0005c854 is supposed to be "deleted" by a DynDOLOD plugin. Probably a bug with the manual patch file included in the latest alpha.

The mesh being replaced is most likely irrelevant for the duplication.

Sorry I assumed the logs updated during my las run but yes I am using Alpha 133. hopefully these are the correct logs for you

DynDOLOD_SSE_log.txt DynDOLOD_SSE_Debug_log.txt