DynDOLOD 3.00 Alpha 196

[SkyKatarsis]

On 11/7/2023 at 12:27 PM, sheson said:

Удалите старый журнал TexGen, журнал отладки и bugreport.txt.

Запустите TexGen и нажмите кнопку «Предварительный просмотр» для HD Tree. Измените раскрывающийся список, чтобы изменить предварительный просмотр на полную модель.
Если он по-прежнему отображается черным, проверьте журнал сообщений, загрузите новый журнал, журнал отладки и bugreport.txt. Если явных ошибок нет, загрузите также полную модель NIF и полные текстуры, которые она использует.
Если он показывает «ОК», сгенерируйте новый вывод с помощью TexGen, установите и обновите текстуры атласа с помощью DynDOLOD .

https://ibb.co/vjSDh1f - preview to that full model, black.

In general, I was already tired of struggling with this and solved the problem differently.  I found a similar willow tree lod and replaced the black ones in TehGen with it, it turned out better.

 

[sheson]

26 minutes ago, SkyKatarsis said:

https://ibb.co/vjSDh1f - preview to that full model, black.

In general, I was already tired of struggling with this and solved the problem differently.  I found a similar willow tree lod and replaced the black ones in TehGen with it, it turned out better.

If it still shows black, check the messages log, upload the new log, debug log and bugreport.txt. If there are no obvious errors, also upload the full model NIF and the full textures it uses.

[leostevano]

Should've put a seatbelt warning with the new alpha.. Cut down 20+ minutes of generation time. GG Sheson 

[SkyKatarsis]

On 11/8/2023 at 8:28 PM, sheson said:

... also upload the full model NIF and the full textures it uses.

Where?

[PRieST]

Here as an example:

https://ufile.io/

[sheson]

2 hours ago, SkyKatarsis said:

Where?

A file service. Like your google drive that you used before.

[SkyKatarsis]

1 hour ago, sheson said:

A file service. Like your google drive that you used before.

Mesh and texture from this little mod (there are only 4 trees, that's Moist_ReachTree02) - https://www.nexusmods.com/skyrimspecialedition/mods/99083

[sheson]

53 minutes ago, SkyKatarsis said:

Mesh and texture from this little mod (there are only 4 trees, that's Moist_ReachTree02) - https://www.nexusmods.com/skyrimspecialedition/mods/99083

I have a really simple request that is easy to do, third time's a charm:
Upload the full model NIF and the full textures from your load order that shows black in your TexGen preview.

 

[z929669]

7 hours ago, SkyKatarsis said:

Where?

Here using the editor tools or drag/drop into a post. Or using a link to your Mega/Google Drive/etc. Archive into 7z to reduce size of large files. NIFs are usually < 1 Mb.

[nuvoromo]

I have read alot and still cannot understand exactly where I put DynDOLOD Resources SE, DynDOLOD Scripts, and DynDOLOD DLL SE - SKSE64 Plugin - Skyrim Special Edition 1.6.640. Do these mods need to be loaded with the highest priority, at the bottom, or does it not matter? Also, is the order I listed the three mods correct? Lastly, If there is a specific patch for another mod related to DynDOLOD like R's Windmill - DynDOLOD patch, where should that be loaded? Thanks, sorry I couldn't find this info, I tried. 

[sheson]

42 minutes ago, nuvoromo said:

I have read alot and still cannot understand exactly where I put DynDOLOD Resources SE, DynDOLOD Scripts, and DynDOLOD DLL SE - SKSE64 Plugin - Skyrim Special Edition 1.6.640. Do these mods need to be loaded with the highest priority, at the bottom, or does it not matter? Also, is the order I listed the three mods correct? Lastly, If there is a specific patch for another mod related to DynDOLOD like R's Windmill - DynDOLOD patch, where should that be loaded? Thanks, sorry I couldn't find this info, I tried. 

https://dyndolod.info/Installation-Instructions
Install the Core Files from either DynDOLOD Resources or DynDOLOD Resources SE depending on the used game version as any other mod. Typically overwrite everything else unless another mod specifically instructs to overwrite DynDOLOD Resources. Refer to Load/Overwrite Orders for detailed explanations.
Install DynDOLOD DLL (overwrite DynDOLOD Resources with the DynDOLOD DLL Scripts)

The actual DynDOLOD.DLL should not have conflicts, obviously

https://www.nexusmods.com/skyrimspecialedition/mods/33082 R's Windmill - DynDOLOD patch specifically instructs to overwrite DynDOLOD Resources SE:
Installing this mod is extremely easy, download and install it with you preferred mod manager and place the archive just after DynDOLOD Resources SE.

https://dyndolod.info/Help/Load-Overwrite-Orders
Unambiguous terms are loading before or after, lower or higher priority, something overwrites something else. Something loading after replaces something loading before it. Something having a higher priority means it loads after something with lower priority. Something overwriting something else is the most clear expression to convey what is winning a conflict.
Ambiguous terms like top or bottom are always confusing and became meaningless with mod managers that allow sorting of lists by ascending or descending by different options. These ambiguous terms should never be used by anyone, especially guides and explanations.

 

[nuvoromo]

Thanks sheson, appreciate it. 

[omronhe]

DBM MuseumBuilding went missing while I loaded dyndolod, I checked DynDOLOD_SSE_log there are several relevant lines as follows:

[00:37] <Warning: File not found textures\odyssey\od1\balfiera\niko\pantheons\aedricseries\y'ffre\stainedglass\esoy'ffrestainedglass_n.dds. Used by Meshes\dbm resources\architecture\newmuseum\museumexterior.nif LegacyoftheDragonborn.esm DBM_MuseumBuilding [STAT:108D4B2F]>
[00:39] <Warning: Root block is NiNode in Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>
[00:39] <Warning: Filename textures\architecture\solitude\sstonestep01.dds does not adhere to file naming conventions. Used by Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>

but I had yet no clue how to fix it, any suggestions will be appreciated

Edited November 10, 2023 by omronhe

[sheson]

2 hours ago, omronhe said:

DBM MuseumBuilding went missing while I loaded dyndolod, I checked DynDOLOD_SSE_log there are several relevant lines as follows:

[00:37] <Warning: File not found textures\odyssey\od1\balfiera\niko\pantheons\aedricseries\y'ffre\stainedglass\esoy'ffrestainedglass_n.dds. Used by Meshes\dbm resources\architecture\newmuseum\museumexterior.nif LegacyoftheDragonborn.esm DBM_MuseumBuilding [STAT:108D4B2F]>
[00:39] <Warning: Root block is NiNode in Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>
[00:39] <Warning: Filename textures\architecture\solitude\sstonestep01.dds does not adhere to file naming conventions. Used by Meshes\dbm resources\architecture\museum.nif LegacyoftheDragonborn.esm DBMOldMuseum [STAT:1013D92C]>

but I had yet no clue how to fix it, any suggestions will be appreciated

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts.

Read https://dyndolod.info/Official-DynDOLOD-Support-Forum#In-Game-Screenshots how to make useful screenshots of the missing full model with more informative console.

[fractalbase]

Hi, I recently tried generating  DynDOLOD, and DynDOLOD seems to crash without a bug report before prompting that generation is complete and should the 3 plugins be generated.  Looking at the output folder, all the loose files appear to be there.  The logs that I happen to have (https://drive.google.com/drive/folders/18Hw-2mZiFWUgP4rL76fVupr-6SWAAqJe?usp=sharing) are from the previous run of DynDOLOD where future progress was halted because DynDOLOD detected an enabled plugin with a certain error that should be fixed.

Log files like bugreport.txt weren't generated.  Any ideas?