DarkPhoenix

I'm not certain I am doing this correctly so forgive me if I am not. After days of trying to figure out the cause, it seems the mod Trim The Fat - Hagraven (https://www.nexusmods.com/skyrimspecialedition/mods/32177) was causing a CTD for me while using DynDOLOD. The CTD was occurring between Fort Greymoor and North Brittleshin Pass. I followed the DynDOLOD-README steps in order to find the cause of the CTDs which pointed me to the following: Doing a search for the hagravenfenceXX.nif, I found that the Trim the Fat-Hagraven mod contained the last in my load order. Anyhow, I've started new games the past few days to be certain, ran the mod through NIF Optimizer, CAO, etc and nothing seems to make the mod work for me in my game so I got rid of it and reported it on the mod page. I wanted to report it here as well in the event someone else is having the same issues.

I know I am waking a dead thread but had to say thank you so much! I was driving myself crazy trying to figure this one out

BUMP Also, if I can't be found, how would I go about changing the converted .esp back to LE

I created my own, but I get CTDs when opening the retort... Then I heard there was one already for LE. However, when I searched, I can only find the SSE version (which was converted from the LE version). I've been looking for it everywhere for it for over any hour (found a couple broken links, but that's about it). Anyone know where it is/where I can find it?

Thank you fro the response. I'm on MO 1.3.14. I was going to upgrade to MO2, but I heard there's still issues with some programs, etc. I did what you said and ran Loot outside of MO and it worked actually. Then I ran it using MO, worked again. But it did the same thing once I closed MO and reopened it. As for Loot running the same LOOT, I am not sure. I'm going to try your other suggestion and look into that right now UPDATE: So I completely deleted the Loot folder because 2 copies kept popping up inside that drop down window to the left of the run button no matter how many times I removed Loot. Then I re-installed Loot using the zipped file and not the installer and it ran via MO Weird thing is that after I closed MO and ran loot again to test it, Loot crashed 2 times. 3rd time it actually worked... any ideas?

So here's a new one. I just downloaded the newest version of Loot yesterday. Anyhow, no problems when first running it. However, I don't know if it's just after I close MO after the first time of installing it, Loot hangs and won't open. Totally white screen... and I can't figure out why it opens the first time but refuses to open after that. The only way I can get it to open again is to re-install Loot. Things I've tried that haven't worked: Running installer inside the MO directory directly Running installer on the desktop then moving LOOT folder inside the MO folder Has this happened to anyone else? Anyone know of a fix?

Thank you for this. Windows 10 has this annoying knack for automatically turning on Windows Defender even after you've turned it off and told it not to turn on again... I couldn't figure out why Merged Plugins all of the sudden started giving me these Access Violation errors out of nowhere and your insistent remark forced me to check again and low and behold guess what was back on again... ! Thanks again...

FINALLY! I made it a bit of a mission but I figured it out. Looks like it was an issue with Java issue. I installed a mod that required me to run Java to create a plugin patch. So I ran the Java script through MO. Not sure how it messed it up because it was working fine for a while or what not, but apparently that plugin being enabled is what caused the issue. Makes sense now too because when it was processing in the java screen, I could see it processing all my mods. Anyhow, I disabled the patch and everything works fine again. Side Note: I don't know why but now Java doesn't work on my computer at all but that's a whole separate issue i'm not even worried about.

It will stink starting over and wasting those 200+ hours... but I'm more worried about not knowing what happened because it could happen again. Is there anything I can do to try and find out what happened or what may have caused this?

I tried to start up again with a blank profile using MO with all my other saves and they startup ok so I think the CTD is pretty much gone. Also, I took pics of the screen. I keep feeling like I wasn't explaining it right. Here's my normal MO profile and mods list (The error in the top right corner is just saying I have files in the overwrite folder): https://drive.google.com/open?id=12B_whXDd-pXoqv381oOEQ5nr11uqcnRJ This is after the logo screen when I'm selecting a save to load: https://drive.google.com/open?id=1k4FwuN3QxqHAxD23KMA6rj3qJvtifg2o....and the message I get when I'm trying to load one of my saves (different than the blank profile message*): https://drive.google.com/open?id=1rq1PAMogZY3z8DZdWgkaY8YekJaF_HoG Then after I click 'Yes' and the save loads. Here's a few shots of those MCM notifications I get when I load any of my previous saves: https://drive.google.com/open?id=1Ez0V_zyJACsPWQ716vNvhdlfhbuB0nyY https://drive.google.com/open?id=1StsBoxWYYop4xq4u2Gin79ZVP8IyM9hN https://drive.google.com/open?id=1MS4jCjwkBa9xJTDPRuQ-5nV4qtic9FME https://drive.google.com/open?id=1zflG0wM4XpgUR8tlHmGmsMZR-xPyyQey https://drive.google.com/open?id=1rlWbY50jUegJJ0I9NSbptwSmiBjFeCXp https://drive.google.com/open?id=1_ujJbGFtzqH6YFh7eJbw9w3L7qYTeKUw https://drive.google.com/open?id=1JBA0MJl9tuPbtCaNW3u9hbXRAwTg2BEr https://drive.google.com/open?id=14m9zUQzbIByHZISFba-Y8ryqbTgd0ePa https://drive.google.com/open?id=13Q4uUrw7xfQyF6rwNGVq0eO809qaM-P2 https://drive.google.com/open?id=1uF7tkj5s_xH3aycUsFynVPFBBSp0pzEs Finally, this is the error message I get after loading a save using my blank profile on MO (The save loads without a crash): https://drive.google.com/open?id=1nKL738LteampNemHZrNblLUmCWJsg4aO ... I really hope the pics can provide more clarity. Let me know if you have any more questions or suggestions. I'm really at a loss here

Good to know. I cleaned up the Data folder and put all the unmanaged mods under MO (minus the vanilla DLCs). There's no CTD with the Blank profile. Actually there's no more CTD with any of the profiles I've created. There hasn't been since I got rid of a set of 5 mods called 'Lore-Worthy'. I just can't figure out why MO isn't loading any of the mods I have anymore

Thanks, I'm in the process of doing this right now... Could this be the problem why MO isn't loading my mods all of the sudden?

The CTD isnt an issue anymore. It stopped once I got rid of the Lore-Worthy mods. Now almost all the mods I have in ModOrganizer are not loading despite being enabled in MO The Unmanaged mods are ones I've gotten from Steam Workshop. Would you recommend placing them in 'ModOrganizer/Mods/' ? With regards to the MCM notifications, I only got them if I started the game for the first time after I had just installed a mod with an MCM menu. Once I'd make a save after that, then loaded that particular save, I would no longer receive notifications for that already installed mods. Now, whenever I load any of those saves, notifications are displayed for all mods with MCM menus as if I had just installed them. That's never happened until now.

All of the sudden started CTD out of nowhere. I have 300+ mods and I was disabling them one by one while looking for help via Nexus. It stopped crashing once I removed a set of mods (lore-worthy mods. Apparently if I had more than 3 of them installed, it crashed my game at the logo) —All was right with the world for a few hours when all of the sudden when I loaded a Save (via MO) and the majority of my meshes and textures are vanilla but not all of them. SKSE and ENBoost was active though. Side Note: I noticed was when I load saves Mod Configuration Menu MCM gives me notifications that mods are being loaded in the upper left of the screen. I thought this was curious because I’ve only seen this happen a long time ago when I first started my play-through and I have never see it happen after. Things I’ve tried so far: I've uninstalled and re-installed MO Disabled and re-enabled my mods, plugins, etc. in an attempt to get things working again. It's pretty much identical to the issue that happened here: https://forum.step-project.com/topic/12442-mo-not-loading-my-mods/?do=findComment&comment=211627. I guess this was addressed in a Windows Update but I am using the latest build (Windows build 1699.98). As for ModOrganizer, I'm using MO 1.3.11 from Nexus. Another note, I was previously on the Windows 10 Insider’s Program to get the 10/17/2017 VRAM fix update early, but I immediately quit the program once I got that update. Mod list attached (upside down for some reason MO lists it like that) modlist.txt

WOW! This is my issue exactly! I am having the exact same issue I all of the sudden started CTD out of nowhere. I have 300+ mods and I was disabling them one by one while looking for help via Nexus. It stopped crashing once I removed a set of mods (lore-worthy mods. Apparently if I had more than 3 of them installed, it crashed my game at the logo) —All was right with the world for a few hours when all of the sudden when I loaded a Save (via MO) and all my meshes and textures are vanilla. Side Note: I noticed was when I load saves Mod Configuration Menu MCM gives me notifications that mods are being loaded in the upper left of the screen. I thought this was curious because I’ve only seen this happen a long time ago when I first started my play-through and I have never see it happen after. Things I’ve tried so far: I've uninstalled and re-installed MO Disabled and re-enabled my mods, plugins, etc. in an attempt to get things working again. I'm using MO 1.3.11 from Nexus. WIndows build 1699.64 I was previously on the Windows 10 Insider’s Program to get the 10/17/2017 VRAM fix update early, but I immediately quit the program once I got that update. WTH is going on...?! I feel like I just can't catch a break here.