DynDOLOD 3.00 Alpha 198

[Saint_Chewy]

1 hour ago, sheson said:

Hiding, disabling things is a troubleshooting step and not a fix. The script is required for normal operation, otherwise it would not exist.

We are still trying to find why Engine Fixes causes the problem and how to properly solve the issue.

Yes absolutely I agree with you, I was just wondering what you wanted me to try next since I did not stutter when hiding SHESON_DynDOLOD_Worshipper.pex? The sentence was cut off so I was not entirely sure if thats what you meant or not.

Edit: I re-read your previous messages and tried a few more things.

Disabled everything under [Fixes] in EngineFixes.toml and I was unable to complete my test runs as I was getting random crashing. I tried a few times and would get to different places when it would crash. If this is something you would like me to continue testing, I can try again with only half the fixes disabled. I also installed DynDOLOD DLL and the DynDOLOD DLL papyrus scripts and disabled PapyrusUtil SE and I was still receiving stutter with that combination.

Edit 2: I just re-generated my LOD with WorkaroundLargeReferencesBugs=1 and installed the scripts 3 from the requirements. I made sure that those scripts overrode DynDOLOD DLL SE - Scripts and DynDOLOD Resources SE. I tried with both PapyrusUtil and DynDOLOD DL and I still had the stutter

Edited November 1, 2022 by Saint_Chewy

[sheson]

1 hour ago, Saint_Chewy said:

Yes absolutely I agree with you, I was just wondering what you wanted me to try next since I did not stutter when hiding SHESON_DynDOLOD_Worshipper.pex? The sentence was cut off so I was not entirely sure if thats what you meant or not.

Edit: I re-read your previous messages and tried a few more things.

Disabled everything under [Fixes] in EngineFixes.toml and I was unable to complete my test runs as I was getting random crashing. I tried a few times and would get to different places when it would crash. If this is something you would like me to continue testing, I can try again with only half the fixes disabled. I also installed DynDOLOD DLL and the DynDOLOD DLL papyrus scripts and disabled PapyrusUtil SE and I was still receiving stutter with that combination.

Edit 2: I just re-generated my LOD with WorkaroundLargeReferencesBugs=1 and installed the scripts 3 from the requirements. I made sure that those scripts overrode DynDOLOD DLL SE - Scripts and DynDOLOD Resources SE. I tried with both PapyrusUtil and DynDOLOD DL and I still had the stutter

The minimum setup should be able to run with all fixes disabled as it should be able to run without Engine Fixes.

Explain again exactly what are the tests you need to in order to verify it stutters or not.

Just to make sure, it depends on which scripts are overwriting last if PapyrusUtil or DynDOLOD DLL is used.

For the next tests I will need to know what you are going to use, PapayrusUtil or DynDOLOD DLL, scripts 2 or scripts 3 with the workarounds. I will add debug information to the script for which version you decide on.

[Saint_Chewy]

20 minutes ago, sheson said:

The minimum setup should be able to run with all fixes disabled as it should be able to run without Engine Fixes.

Explain again exactly what are the tests you need to in order to verify it stutters or not.

Just to make sure, it depends on which scripts are overwriting last if PapyrusUtil or DynDOLOD DLL is used.

For the next tests I will need to know what you are going to use, PapayrusUtil or DynDOLOD DLL, scripts 2 or scripts 3 with the workarounds. I will add debug information to the script for which version you decide on.

For my test that I am performing currently, I load the game and at the start menu and I coc riverwood and then run down the road and go east towards the south side of Riften. I will typically know if its going to stutter or not by the time I reach Fort Amol. Now as of my most previous test this has been my load order (MO2's modlist has them in reverse order so SSE Engine Fixes is on top):

+DynDOLOD_Output Vanilla
-DynDOLOD_Output WorkaroundLargeReferencesBugs=1
+TexGen_Output Vanilla
-DynDOLOD DLL SE - Scripts 3.00
-DynDOLOD PapurysUtil SE - Scripts 3.00
+DynDOLOD DLL SE - SKSE64 Plugin - Skyrim Special Edition 1.5.97
+DynDOLOD DLL SE - Scripts
+DynDOLOD Resources SE
+(Part 1) SSE Engine Fixes for 1.5.39 - 1.5.97
+Address Library for SKSE Plugins

For my next test I will use PapayrusUtil and use scripts 2 if that is OK.

Edited November 1, 2022 by Saint_Chewy

[sheson]

1 hour ago, Saint_Chewy said:

For my test that I am performing currently, I load the game and at the start menu and I coc riverwood and then run down the road and go east towards the south side of Riften. I will typically know if its going to stutter or not by the time I reach Fort Amol. Now as of my most previous test this has been my load order (MO2's modlist has them in reverse order so SSE Engine Fixes is on top):

+DynDOLOD_Output Vanilla
-DynDOLOD_Output WorkaroundLargeReferencesBugs=1
+TexGen_Output Vanilla
-DynDOLOD DLL SE - Scripts 3.00
-DynDOLOD PapurysUtil SE - Scripts 3.00
+DynDOLOD DLL SE - SKSE64 Plugin - Skyrim Special Edition 1.5.97
+DynDOLOD DLL SE - Scripts
+DynDOLOD Resources SE
+(Part 1) SSE Engine Fixes for 1.5.39 - 1.5.97
+Address Library for SKSE Plugins

For my next test I will use PapayrusUtil and use scripts 2 if that is OK.

Are you changing player speed in any way?

Replace attached script in DynDOLOD Resource SE (scripts 2 for PapyrusUtil). Enable all papyrus logging.  Do your test with minimal setup, DynDOLOD.esm only. Quit the game as soon as you notice stutter. Upload the papyrus log. 

SHESON_DynDOLOD_Worshipper.pex

[Saint_Chewy]

19 minutes ago, sheson said:

Do your test with minimal setup, DynDOLOD.esm only

Yes I have the speedmult set to 250 - this originally was set to make sure what I was having was not actual load stutter. I can run around the whole map like this with no stutter currently. Also tested before with default speed and stutter would be the same.

Edit: Hopefully I did exactly as you asked only DynDOLOD.esm enabled in the plugins and I did my quick test. Uploaded my papyrus.log

Hopefully I did it correct if not I will do it again. This is how my left side of MO2 looked:

+DynDOLOD_Output Vanilla
+DynDOLOD DLL SE - Scripts
+DynDOLOD Resources SE
+(Part 1) SSE Engine Fixes for 1.5.39 - 1.5.97
+Address Library for SKSE Plugins
+PapyrusUtil SE - Modders Scripting Utility Functions

Papyrus.0.log

Edited November 1, 2022 by Saint_Chewy

[sheson]

24 minutes ago, Saint_Chewy said:

Yes I have the speedmult set to 250 - this originally was set to make sure what I was having was not actual load stutter. I can run around the whole map like this with no stutter currently. Also tested before with default speed and stutter would be the same.

Edit: Hopefully I did exactly as you asked only DynDOLOD.esm enabled in the plugins and I did my quick test. Uploaded my papyrus.log

Hopefully I did it correct if not I will do it again. This is how my left side of MO2 looked:

+DynDOLOD_Output Vanilla
+DynDOLOD DLL SE - Scripts
+DynDOLOD Resources SE
+(Part 1) SSE Engine Fixes for 1.5.39 - 1.5.97
+Address Library for SKSE Plugins
+PapyrusUtil SE - Modders Scripting Utility Functions

Papyrus.0.log 456 kB · 0 downloads

Good. Repeat the test with DynDOLOD.esp enabled please.

[Saint_Chewy]

5 minutes ago, sheson said:

Good. Repeat the test with DynDOLOD.esp enabled please.

Done. Here is that log

Papyrus.0.log

[sheson]

10 minutes ago, Saint_Chewy said:

Done. Here is that log

Papyrus.0.log 3.31 MB · 1 download

Something went wrong there. It looks like a script for DynDOLOD DLL is active.

Make sure that only SHESON_DynDOLOD_Worshipper.pex of the scripts in DynDOLOD Resources SE is being overwritten with the text version.

[Saint_Chewy]

6 minutes ago, sheson said:

Something went wrong there. It looks like a script for DynDOLOD DLL is active.

Make sure that only SHESON_DynDOLOD_Worshipper.pex of the scripts in DynDOLOD Resources SE is being overwritten with the text version.

Okay fixed sorry about that. Here is the redo log

Papyrus.0.log

[sheson]

7 minutes ago, Saint_Chewy said:

Okay fixed sorry about that. Here is the redo log

Papyrus.0.log 76.13 kB · 1 download

That's better. What happens when you uncheck Lathe Reference Fix in the DynDOLOD SkyUI MCM and do the test?

That's the last piece of information for tonight. I will have more script(s) to test tomorrow.

[Saint_Chewy]

7 minutes ago, sheson said:

That's better. What happens when you uncheck Lathe Reference Fix in the DynDOLOD SkyUI MCM and do the test?

That's the last piece of information for tonight. I will have more script(s) to test tomorrow.

Unchecked Large Reference Fix in the MCM (Had to enable SkyUI to get there) and no change unfortunately. Here is that new log file in case you need it. Thank you so much again for your help with this Sheson.

Papyrus.0.log

[Edryu]

Is there something to be enabled in Dyndolod to read SWAP files? I had been running the lastest version of Dyndolod multiples times, but doesn't generate updated LOD for some farmhouses and trees swapped with Base Object Swapper.

[sheson]

8 hours ago, Edryu said:

Is there something to be enabled in Dyndolod to read SWAP files? I had been running the lastest version of Dyndolod multiples times, but doesn't generate updated LOD for some farmhouses and trees swapped with Base Object Swapper.

Read the first post which log and debug log to upload.

No.

https://dyndolod.info/Mods/Base-Object-Swapper

[aragonit]

DynDOLOD 105 uses 53GB of space and after filling up all of it, aborts with an empty error. Normally the DynDOLOD Output was in the range of 16GB

[sheson]

1 hour ago, aragonit said:

DynDOLOD 105 uses 53GB of space and after filling up all of it, aborts with an empty error. Normally the DynDOLOD Output was in the range of 16GB

Read the first post.

https://dyndolod.info/Changelog

https://dyndolod.info/FAQ "Long running time or output several GB in file size"