DynDOLOD 3.00 Alpha 198

[Samphaa7]

Hi,

I'm trying to get GrassMode 2 to work with a modified version of Nolvus. Dyndolod appears to have completed everything fine, but in game, the grass in neargrids isn't there. If I use TFC and fly to where the grass is missing, it fades in, and continues to fade in right up until fargrids. But when exiting free cam and going back to player perspective, the grass fades out again. I also very occasionally get leftover 2d grass billboards where there should be full grass, as seen in the third image.

 

I can only assume it's an ini setting somewhere, I've adjusted overwrite grass distance and overwrite grass fade range in the grasscontrol.ini to no avail.

 

https://drive.google.com/file/d/1Ap6oLI6-K-z-kChq6SeUYkf85PReN4Uj/view

https://drive.google.com/file/d/10J8pAcow5pA4AKX10JC7168X86Xpe4rI/view

https://drive.google.com/file/d/1v6fs_lA3PJOpeUW0CSqhTUN8UtOCuC6G/view

 

Pastebin says the log is too big, so I've posted it to my google drive, hopefully it works

Log: https://drive.google.com/file/d/11SzAMyO7EfkZpF72gKVrF-79Be0boAe_/view?usp=sharing

 

Any help greatly appreciated, I feel like I'm almost there, just the last little piece needs ironing out.

 

Thanks

[sheson]

18 minutes ago, Samphaa7 said:

Hi,

I'm trying to get GrassMode 2 to work with a modified version of Nolvus. Dyndolod appears to have completed everything fine, but in game, the grass in neargrids isn't there. If I use TFC and fly to where the grass is missing, it fades in, and continues to fade in right up until fargrids. But when exiting free cam and going back to player perspective, the grass fades out again. I also very occasionally get leftover 2d grass billboards where there should be full grass, as seen in the third image.

 

I can only assume it's an ini setting somewhere, I've adjusted overwrite grass distance and overwrite grass fade range in the grasscontrol.ini to no avail.

 

https://drive.google.com/file/d/1Ap6oLI6-K-z-kChq6SeUYkf85PReN4Uj/view

https://drive.google.com/file/d/10J8pAcow5pA4AKX10JC7168X86Xpe4rI/view

https://drive.google.com/file/d/1v6fs_lA3PJOpeUW0CSqhTUN8UtOCuC6G/view

 

Pastebin says the log is too big, so I've posted it to my google drive, hopefully it works

Log: https://drive.google.com/file/d/11SzAMyO7EfkZpF72gKVrF-79Be0boAe_/view?usp=sharing

 

Any help greatly appreciated, I feel like I'm almost there, just the last little piece needs ironing out.

 

Thanks

Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD debug log to also upload when making posts.

https://dyndolod.info/Help/Grass-LOD
In the vanilla game full grass only renders in active exterior cells. No Grass In Objects can render full grass outside the active exterior cells in the LOD area.

https://dyndolod.info/Help/Grass-LOD#Settings
The settings file for No Grass in Objects is either ..\Data\NetScriptFramework\Plugins\GrassControl.config.txt or ..\Data\SKSE\Plugins\GrassControl.ini depending on the used version. The setting names are not equal, but very similar, in the GrassCtronl.ini dashes - are inserted. Below both are given separated by forward slash /. The GrassControl.ini is created by running the game once or can be downloaded from the optional files section.
With No Grass In Objects full grass can be rendered past the active cells, so grass LOD can either start right beyond the active exterior cells (uGridsToLoad), which is better for performance - or beyond the large reference distance (uLargeRefLODGridSize). The DynDOLODGrassMode/DynDOLOD-Grass-Mode 1 or 2 setting controls the distance of full grass respectively to make sure it renders to the edge where the grass LOD starts.

https://dyndolod.info/Help/Grass-LOD#Gap-between-full-grass-and-grass-LOD
Grass LOD was generated with mode 2 but full grass is not being rendered to the edge of the uLargeRefLODGridSize with the DynDOLODGrassMode/DynDOLOD-Grass-Mode setting in No Grass In Objects as explained above in the section Settings.

NGIO controls distances of full grass. See above and refer to its description/documentation. DynDOLOD does not affect full grass in any way.

Near and Far Grid are distances for dynamic LOD. See https://dyndolod.info/Help/Dynamic-LOD

None of the screenshots seem to show the second problem. If there is an area (cell) outside the active cell area inside the large reference grid that shows both full grass and LOD grass at the same time, report its cell coordinates. https://dyndolod.info/Help/Mod-Configuration-Menu-NG#You-Are-Here

[Samphaa7]

Turns out all I had to do was increase the grass fade slider in the game main menu, what an idiot🤦‍♂️

[sheson]

15 minutes ago, Samphaa7 said:

Turns out all I had to do was increase the grass fade slider in the game main menu, what an idiot🤦‍♂️

The DynDOLOD-Grass-Mode INI setting set to 1 or 2 overwrites the grass distance slider when starting the game. Changing the grass distance slider in the game overwrites the DynDOLOD-Grass-Mode until the game is restarted.

[Samphaa7]

7 minutes ago, sheson said:

The DynDOLOD-Grass-Mode INI setting set to 1 or 2 overwrites the grass distance slider when starting the game. Changing the grass distance slider in the game overwrites the DynDOLOD-Grass-Mode until the game is restarted.

You are correct. Just restarted and the slider was back to being far on the left side. I take it you're referring to the Dyndolod Grass Mode setting in the NGIO grasscontrol.ini? If so, can I just disable it in MO2 to stop it overwriting? I don't need it anymore, do I?

 

[sheson]

1 hour ago, Samphaa7 said:

You are correct. Just restarted and the slider was back to being far on the left side. I take it you're referring to the Dyndolod Grass Mode setting in the NGIO grasscontrol.ini? If so, can I just disable it in MO2 to stop it overwriting? I don't need it anymore, do I?

Read the links and quotes in this post https://stepmodifications.org/forum/topic/19903-dyndolod-300-alpha-198/page/733/#findComment-289048

NGIO is required to show full grass outside the active cells. The NGIO INI settings need to be used to control the full grass distance. Refer to its description, explanations in its INI, help forum/comments.

[maribaken]

Hi,

I've been trying to get a good color match on the grass LOD seam for days now, without any luck. I've tried changing Texgen Direct/Ambient settings & DynDolod ComplexGrassBrightness*/ComplexGrassBacklightMask, and whenever I get something that looks good, I wait a few hours in game and it looks like **** again. I've tried searching for solutions but all answers I've found is related to adjusting the above settings, or changing ENB preset or Grass mod. Before I do that I would like to verify that this issue is indeed unsolvable on the grass cache/texgen/dyndolod side of things; Maybe I'm just doing something wrong. I'm using Verdant with complex grass, Rudy ENB for Obsidian weathers with Lux. Here is a link with screenshots, logs etc. : https://www.mediafire.com/folder/dyyvdh9i95m7l/Seam_issue

As an example, with my current settings (see .inis in links), during some weathers/times of day I get very dark grass LOD on the side facing away from the sun (ScreenShot109.png). But with the same settings I also get too bright grass LOD during other weathers/time of day (ScreenShot102.png), also on the side facing away from the sun. From the guides I would increase ComplexGrassBacklightMask to solve 109, but that would make 102 worse. Is it theoretically possible to adjust the settings to account for all scenarios? Is the ENB causing the problem?

Thanks,

[aazz]

17 hours ago, sheson said:

If this error repeatable? Restart MO2 / PC.
Doublecheck in MO2 right window Data tab that the NIF you uploaded is really the winning one in the load order.
Also upload ..\Meshes\cotn\dawnstar\lod\dawnstarhouse06_lod.nif and C:\DynDOLOD\Logs\DynDOLOD_SSE_Object_Report.txt if it exists

This is not related to LODGen.
Also unrelated, but you probably want to run TexGen first to update the outdated billboards. See https://dyndolod.info/Messages/Billboard-For-Model-Does-Not-Contain-Texture

https://mega.nz/file/KQxnjZbC#-ny_hkTJ9bnxg7xnAYb-O61n4zKw4tGNUPPQ1rI5DV4

This is the LOD file.

https://www.nexusmods.com/skyrimspecialedition/mods/85242

This mesh came from this mod.
I'm currently re-running dyndolod to get the grass lod colors right. I seem to get this error about once every three attempts.
Thanks for the reply!

Oh, I have one more question. Every time I run dyndolod again, it always starts a new texgen. Did I do something wrong?

Edited 4 hours ago by aazz