Anathena Posted July 6, 2022 Posted July 6, 2022 55 minutes ago, sheson said: Moved the post to the DynDOLOD 3 Alpha thread. See the first post. If it (sometimes) generates logs, then upload them as explained in the first post. If there is no bugreport.txt either, check the Windows Event log to check what is actually crashing outside of the tool or why the OS is terminating it. TexGen/DynDOLOD is NOT closing on its own if it doesn't write any log files. Based on other posts in this thread, update MO2. Hey Sheson, thank you for the help! I updated MO2, the problem persists. Windows Event Log gives the following two Exception codes: 0xc000001d, 0xc0000005 as responsible for crashes at different instances (sometimes the former, sometimes the latter). For code 0xc000001d, it also states the following: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Taking Your Firstborn because of this error. Program: Taking Your Firstborn File: The error value is listed in the Additional Data section. User Action 1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again. 2. If the file still cannot be accessed and - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted. - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer. 3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER. 4. If the problem persists, restore the file from a backup copy. 5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
sheson Posted July 6, 2022 Author Posted July 6, 2022 51 minutes ago, Anathena said: Hey Sheson, thank you for the help! I updated MO2, the problem persists. Windows Event Log gives the following two Exception codes: 0xc000001d, 0xc0000005 as responsible for crashes at different instances (sometimes the former, sometimes the latter). For code 0xc000001d, it also states the following: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Taking Your Firstborn because of this error. Program: Taking Your Firstborn File: The error value is listed in the Additional Data section. User Action 1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again. 2. If the file still cannot be accessed and - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted. - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer. 3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER. 4. If the problem persists, restore the file from a backup copy. 5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance. The message seems self explanatory. There seems to be a problem with the involved file system(s). Could be powersavings related,.
Vadnais Posted July 6, 2022 Posted July 6, 2022 I'm having some trouble getting grass LODs to show up in-game. I'm running Seasons of Skyrim, and according to them I can get grass LOD's for the seasons, but I have to force each season in the .ini and run NGIO on a ver. 1.5 of the game. Which I did, and renamed all the cache files appropriately (SUM, SPR, etc). However, after running DynDOLOD for my AE version of the game, they aren't showing up for me. I don't know if i've done something wrong or if I have something set incorrectly or not, could I have messed up something with the cache generation itself? I tried to follow the guides on settings but I feel like i've missed something here. Here are some links showing an example of my issue and what settings i've been using. Thanks for your help.
sheson Posted July 6, 2022 Author Posted July 6, 2022 36 minutes ago, Vadnais said: I'm having some trouble getting grass LODs to show up in-game. I'm running Seasons of Skyrim, and according to them I can get grass LOD's for the seasons, but I have to force each season in the .ini and run NGIO on a ver. 1.5 of the game. Which I did, and renamed all the cache files appropriately (SUM, SPR, etc). However, after running DynDOLOD for my AE version of the game, they aren't showing up for me. I don't know if i've done something wrong or if I have something set incorrectly or not, could I have messed up something with the cache generation itself? I tried to follow the guides on settings but I feel like i've missed something here. Here are some links showing an example of my issue and what settings i've been using. Thanks for your help. Read the first post which TexGen and DynDOLOD log and debug log to upload when making posts. Search for similar posts to find corresponding answers for the same problem / grass mods. Refer to the source of the constantly updated instructions at https://dyndolod.info/Help/Seasons#Grass-and-Grass-LOD instead on posts repeating them. Go through the https://dyndolod.info/Help/Grass-LOD#No-Grass-LOD-Check-List Test all seasons in game when troubleshooting.
Vadnais Posted July 6, 2022 Posted July 6, 2022 1 hour ago, sheson said: Read the first post which TexGen and DynDOLOD log and debug log to upload when making posts. Search for similar posts to find corresponding answers for the same problem / grass mods. Refer to the source of the constantly updated instructions at https://dyndolod.info/Help/Seasons#Grass-and-Grass-LOD instead on posts repeating them. Go through the https://dyndolod.info/Help/Grass-LOD#No-Grass-LOD-Check-List Right, sorry here are the logs: https://ufile.io/rg1yj7aw https://ufile.io/hfeswek5 https://ufile.io/cfn0i35u https://ufile.io/cglokoua
Vadnais Posted July 6, 2022 Posted July 6, 2022 The only things I haven't been able to do are check the files themselves as recommended in your guide. I can't find a good source on opening the .bto files that doesn't cost money and GIMP keeps telling me it can't open dds files even when i try the plugins I find on the net. I think im just gonna deal with not having the grass LOD's as much as I want them. I can't seem to find any other posts that have the same issue i'm having, either here or outside in places like Reddit. Thank you for your time anyway, I really appreciate you taking the time to do all of this for the community. I'm really new to diving this deep into modding Skyrim and i've been beating my head against the wall for a week doing it so I think I may need to just step away for a bit and actually play the game lol.
sheson Posted July 6, 2022 Author Posted July 6, 2022 2 hours ago, Vadnais said: The only things I haven't been able to do are check the files themselves as recommended in your guide. I can't find a good source on opening the .bto files that doesn't cost money and GIMP keeps telling me it can't open dds files even when i try the plugins I find on the net. I think im just gonna deal with not having the grass LOD's as much as I want them. I can't seem to find any other posts that have the same issue i'm having, either here or outside in places like Reddit. Thank you for your time anyway, I really appreciate you taking the time to do all of this for the community. I'm really new to diving this deep into modding Skyrim and i've been beating my head against the wall for a week doing it so I think I may need to just step away for a bit and actually play the game lol. BTO files are NIF files and can be opened with NifSkope. If you tell TexGen to generate textures in the BC7 format, then you need to use a DDS plugin that can read BC7 format. Otherwise set TexGen to use DXT1 for 3 channel and DXT5 for 4 channel (if just for a test). The most important thing to check is if the base records have large enough object bounds so that all (most) grasses have billboards generated. If you check the TexGen debug yourself, you will see a lot of lines like Ignoring Meshes\landscape\grass\*.nif bounds volume 0, height 0 Seasonal Landscapes.esp ... Those should be fixed with the CK recalc bounds function, so that billboards are generated for them automatically.
Vadnais Posted July 6, 2022 Posted July 6, 2022 3 hours ago, sheson said: BTO files are NIF files and can be opened with NifSkope. If you tell TexGen to generate textures in the BC7 format, then you need to use a DDS plugin that can read BC7 format. Otherwise set TexGen to use DXT1 for 3 channel and DXT5 for 4 channel (if just for a test). The most important thing to check is if the base records have large enough object bounds so that all (most) grasses have billboards generated. If you check the TexGen debug yourself, you will see a lot of lines like Ignoring Meshes\landscape\grass\*.nif bounds volume 0, height 0 Seasonal Landscapes.esp ... Those should be fixed with the CK recalc bounds function, so that billboards are generated for them automatically. okay, great, I can work with that. Thanks again
Vadnais Posted July 6, 2022 Posted July 6, 2022 4 hours ago, sheson said: BTO files are NIF files and can be opened with NifSkope. If you tell TexGen to generate textures in the BC7 format, then you need to use a DDS plugin that can read BC7 format. Otherwise set TexGen to use DXT1 for 3 channel and DXT5 for 4 channel (if just for a test). The most important thing to check is if the base records have large enough object bounds so that all (most) grasses have billboards generated. If you check the TexGen debug yourself, you will see a lot of lines like Ignoring Meshes\landscape\grass\*.nif bounds volume 0, height 0 Seasonal Landscapes.esp ... Those should be fixed with the CK recalc bounds function, so that billboards are generated for them automatically. Im sorry, I forgot to ask, once that is fixed, should I re-run the NGIO grass cache or should I just pick up at running the TexGen again?
sheson Posted July 7, 2022 Author Posted July 7, 2022 7 hours ago, blyad said: Your program makes my computer turn off. What makes a computer turn off is a hardware, BIOS setting or OS/driver problem. 5 hours ago, Vadnais said: Im sorry, I forgot to ask, once that is fixed, should I re-run the NGIO grass cache or should I just pick up at running the TexGen again? Objects bounds have no affect on grass placements AFAIK, so there should be no need to update the grass cache.
jimmywon34 Posted July 7, 2022 Posted July 7, 2022 On 7/2/2022 at 2:30 PM, sheson said: There seems to be an issue with usvfs_x64.dll from MO2. That's related to the virtual file system. Update MO2 to the recent version. thanks for the troubleshoot. i've ran it again once so far so good it's working.
maramsp Posted July 7, 2022 Posted July 7, 2022 I'm installing seasons of skyrim togewther with turn of the seasons now. As we speak im running xlodgen. But next up is dyndolod. Should i regenerate the occlusion as well here? I havent added any mods other then the seasons of skyrim and turn of the seasons. So, i think i dont have to regenerate occlusion, but better to be safe then sorry to ask here, to know it for certain. Thanks in advance!
Vadnais Posted July 7, 2022 Posted July 7, 2022 https://ufile.io/g7d47aod I got it working! Thanks a ton for your help. Using the Recalc Bounds function is what did it.
maramsp Posted July 7, 2022 Posted July 7, 2022 18 hours ago, sheson said: BTO files are NIF files and can be opened with NifSkope. If you tell TexGen to generate textures in the BC7 format, then you need to use a DDS plugin that can read BC7 format. Otherwise set TexGen to use DXT1 for 3 channel and DXT5 for 4 channel (if just for a test). The most important thing to check is if the base records have large enough object bounds so that all (most) grasses have billboards generated. If you check the TexGen debug yourself, you will see a lot of lines like Ignoring Meshes\landscape\grass\*.nif bounds volume 0, height 0 Seasonal Landscapes.esp ... Those should be fixed with the CK recalc bounds function, so that billboards are generated for them automatically. For this, there is the perferct paint program called paint.net You can get it at getpaint dot net. It automatically can open all sorts of dds, bc7, bc5, etc, etc. This is for me the program to go, as i find it much more easier and lightweight compared to gimp
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now