Skyrim Revisited Pre-Release Feedback

[Neovalen]

I placed Dual Steath Redux right after DSpSoB.esp, and the patch at the bottom of the load order.

 

You should remove DSpSoB as no part of the old mod is required and actually will probably cause issues. (Except for the skeleton if your not using xpms or another replacer)

[Neovalen]

Good news! I have obtained permission from Hothtrooper44 to make an Immersive Weapons patch! :)

I have also sent a message to MasterOfShadows regarding Wot3E and left a message on JaySuS swords thread(hopefully someone can get a hold of JaySuS or provide me some guidance).

[statmonster]

Will this require new meshes?

[Neovalen]

Will this require new meshes?

 

Of course. I need to go through all the weapons and make left handed versions... could take awhile.

[Jorus]

Will this require new meshes?

Of course. I need to go through all the weapons and make left handed versions... could take awhile.

Err.. please don't do this :D

[Vodu2040]

I have a bit of an issue that I cannot seem to figure out.

 

I have been using SR v1.8 with no issues, now I am working my way through SR v1.9 with a fresh install of everything. I have gotten to the Optimize Textures section. I did not optimize in v1.8.

 

The problem is when I run SKSE, Skyrim, or ATTK through MOD Organizer the Bethesda splash starts, but when the menu comes up there is no smoke, no dragon icon and the menu text in nothing but squares, just like when you have a missing font. There is no mouse cursor and no way to select anything on the menu, the only way to exit is crtl-alt-del.

 

If I start the game with launcher, or tesv.exe everything is normal.

 

Is this a MOD Organizer problem or something else?

 

Any help would be greatly appreciated.

 

Thanks.

[Neovalen]

I have a bit of an issue that I cannot seem to figure out.

 

I have been using SR v1.8 with no issues, now I am working my way through SR v1.9 with a fresh install of everything. I have gotten to the Optimize Textures section. I did not optimize in v1.8.

 

The problem is when I run SKSE, Skyrim, or ATTK through MOD Organizer the Bethesda splash starts, but when the menu comes up there is no smoke, no dragon icon and the menu text in nothing but squares, just like when you have a missing font. There is no mouse cursor and no way to select anything on the menu, the only way to exit is crtl-alt-del.

 

If I start the game with launcher, or tesv.exe everything is normal.

 

Is this a MOD Organizer problem or something else?

 

Any help would be greatly appreciated.

 

Thanks.

 

One of your mods is corrupted.

[Vodu2040]

I have a bit of an issue that I cannot seem to figure out.

 

I have been using SR v1.8 with no issues, now I am working my way through SR v1.9 with a fresh install of everything. I have gotten to the Optimize Textures section. I did not optimize in v1.8.

 

The problem is when I run SKSE, Skyrim, or ATTK through MOD Organizer the Bethesda splash starts, but when the menu comes up there is no smoke, no dragon icon and the menu text in nothing but squares, just like when you have a missing font. There is no mouse cursor and no way to select anything on the menu, the only way to exit is crtl-alt-del.

 

If I start the game with launcher, or tesv.exe everything is normal.

 

Is this a MOD Organizer problem or something else?

 

Any help would be greatly appreciated.

 

Thanks.

One of your mods is corrupted.

The only mods installed are Dawnguard, Hearthfires and Dragonborn and the Official HiRes texture packs

 

The game will play fine if I run it normally, but if I use MO i get the funky menu issues, I have reinstalled everything twice now, cleaned the Bethesda esm files and optimized the textures as instructed.  I am not sure which mod is corrupted...

[Neovalen]

 

I have a bit of an issue that I cannot seem to figure out.

 

I have been using SR v1.8 with no issues, now I am working my way through SR v1.9 with a fresh install of everything. I have gotten to the Optimize Textures section. I did not optimize in v1.8.

 

The problem is when I run SKSE, Skyrim, or ATTK through MOD Organizer the Bethesda splash starts, but when the menu comes up there is no smoke, no dragon icon and the menu text in nothing but squares, just like when you have a missing font. There is no mouse cursor and no way to select anything on the menu, the only way to exit is crtl-alt-del.

 

If I start the game with launcher, or tesv.exe everything is normal.

 

Is this a MOD Organizer problem or something else?

 

Any help would be greatly appreciated.

 

Thanks.

One of your mods is corrupted.

The only mods installed are Dawnguard, Hearthfires and Dragonborn and the Official HiRes texture packs

 

The game will play fine if I run it normally, but if I use MO i get the funky menu issues, I have reinstalled everything twice now, cleaned the Bethesda esm files and optimized the textures as instructed.  I am not sure which mod is corrupted...

 

Is there leftover junk in your overwrite folder?

[Vodu2040]

 

 

I have a bit of an issue that I cannot seem to figure out.

 

I have been using SR v1.8 with no issues, now I am working my way through SR v1.9 with a fresh install of everything. I have gotten to the Optimize Textures section. I did not optimize in v1.8.

 

The problem is when I run SKSE, Skyrim, or ATTK through MOD Organizer the Bethesda splash starts, but when the menu comes up there is no smoke, no dragon icon and the menu text in nothing but squares, just like when you have a missing font. There is no mouse cursor and no way to select anything on the menu, the only way to exit is crtl-alt-del.

 

If I start the game with launcher, or tesv.exe everything is normal.

 

Is this a MOD Organizer problem or something else?

 

Any help would be greatly appreciated.

 

Thanks.

One of your mods is corrupted.

The only mods installed are Dawnguard, Hearthfires and Dragonborn and the Official HiRes texture packs

 

The game will play fine if I run it normally, but if I use MO i get the funky menu issues, I have reinstalled everything twice now, cleaned the Bethesda esm files and optimized the textures as instructed.  I am not sure which mod is corrupted...

Is there leftover junk in your overwrite folder?

The overwrite folder contains Dawnguard.esm, Dragonborn.esm, HearthFires.esm, Update.esm which were moved from the game directory per SR instructions and General Patch.esp.  There is nothing in the TES5Edit backups folder.

[WilliamImm]

You should remove DSpSoB as no part of the old mod is required and actually will probably cause issues. (Except for the skeleton if your not using xpms or another replacer)

I meant in the BOSS Userlist Manger, not in the actual game. Thought you'd understand that.

 

Anyway, my suggestion is just to make the JaySuS-compatible meshes, but say if that JaySuS were to suddenly come back to the site and demand that the meshes be taken down for whatever reason, you will comply. Also, the original Wot3E is free for anyone to modify, so you don't need to ask MoS if you are just modifying the original meshes for the mod.

[statmonster]

@vodu2040

Do you have all your ESPs/ESMs checked in MO? (Failure to check an ESM will FTEs result in a pre game CTD.)

Are you trying to launch SKSE through MO? If so, did you do both steps there? By this point you should have installed SKSE I think. (SKSE now requires a folder plus the exe & dll.)

[Vodu2040]

@vodu2040

Do you have all your ESPs/ESMs checked in MO? (Failure to check an ESM will FTEs result in a pre game CTD.)

Are you trying to launch SKSE through MO? If so, did you do both steps there? By this point you should have installed SKSE I think. (SKSE now requires a folder plus the exe & dll.)

Yes everything is checked, I don't have a folder for SKSE in the Skyrim game folder, only the 2 .dlls are there as well as the exe.  In the ModOrganizer folder\mods\ I have a folder called Skyrim Script Extender, which as per the SR instructions, which contains the scripts folder and a meta.ini.

 

As I indicated before I had a working V1.8 SR, then I uninstalled everything and did a clean install for the V1.9 SR including MO, BOSS, BUM, WRYE BASH TES5Edit, and ATTKLt, now it seems I have a corrupt file hanging out somewhere (possibly an ini?).

 

If I run SKSE from the game folder it runs fine, if I run the game with the launcher it runs fine.  If I run the game with anything in MO(ATTK, SKSE, Skyrim), I get the funky menu.  I have used the 'Vanilla Skyrim' Profile and unchecked everything except Skyrim.esm and Update.esm and it still gives me the non-working menu...I am sure it is something simple...I am just at a loss.

[Neovalen]

BETA2 sent to testers, if I missed you somehow please poke me. Please use a clean save (without the original beta) to test.

[Neovalen]

It looks like both files in Ultimate HD Torch optional are overwritten - the dds by Ultimate HD Fire Effects and the nif by New Thinner Torch.

There is still a file not overwritten that I see:

textures/effects/gradients/gradfireexplosion.dds