Executing TexConv returned error C0000135 / VRUNTIME140.dll or VCRUNTIME140_1.dll or thatch03snow.dds was not found

hex0id · November 13, 2018

Hello everyone, I am new to this forum, first of all I want to say huge thanks to Sheson for his brilliant mod, it worked very well for me since oldrim and it did work in SSE the last time (about 6 months ago). So recently I've restarted anew, I am usually running MO, but for a clean test I 've ran TexGen with -sse shortcut outside MO2, so basically it makes Skyrim SE as pure as vanilla.

While generating textures I get these:

[00:00:07.138] C:\Users\Alex\Desktop\test\dyndolod-temp\textures\architecture\farmhouse\thatch03snow.dds not found!
[00:00:07.182] C:\Users\Alex\Desktop\test\dyndolod-temp\textures\architecture\farmhouse\thatch03snow.dds not found!

Check the top of the log that all required *.BSA files are loaded. Turn off MO 1.x archive management.

Check that C:\Users[Your Username]\Documents\My Games\Skyrim\Skyrim.ini (MO users check ..\ModOrganizer\profiles\[profile name]\skyrim.ini) is the default version and contains:

[Archive]
sResourceArchiveList=Skyrim - Misc.bsa, Skyrim - Shaders.bsa, Skyrim - Textures.bsa, Skyrim - Interface.bsa, Skyrim - Animations.bsa, Skyrim - Meshes.bsa, Skyrim - Sounds.bsa

But there is no Skyrim - Textures.bsa in SSE anymore, it have been replaced by a smaller packs like this:

sResourceArchiveList2=Skyrim - Voices_en0.bsa, Skyrim - Textures0.bsa, Skyrim - Textures1.bsa, Skyrim - Textures2.bsa, Skyrim - Textures3.bsa, Skyrim - Textures4.bsa, Skyrim - Textures5.bsa, Skyrim - Textures6.bsa, Skyrim - Textures7.bsa, Skyrim - Textures8.bsa, Skyrim - Patch.bsa

So I went ahead and unpacked them all to find this nasty missing texture myself and make sure it exists, but it doesn't, there is nothing like that in SSE anymore (integrity checked, clean configs). DynDOLOD went fine itself, problem seems only to be in TexGen. Thoughts?

P.S: I believe I can try removing all missing textures from DynDOLOD_SSE_TexGen_noalpha_skyrimesm.txt until all errors are gone, but I am not sure this will be the right thing to do. Googling does not help either.

P.P.S: Using DynDOLOD 2.47 Stand Alone

hex0id · November 13, 2018

I have reverted TexGen config back from the original archive and things just started working all of the sudden, I suspect "uncompressed" setting for all (or some) texture types is a culprit. Mine were set to "uncompressed" for all types.

Edited November 13, 2018 by hex0id

sheson · November 13, 2018

It looks like you might have been running the tools in their default mode for Skyrim, probably because the -sse command line argument might have been not added correctly to run them in Skyrim Special Edition mode.

The output settings in TexGen do not change the ability to read/find textures in the load order.

It is also possible that running the tools in a special windows folder like Desktop under c:\users\ might be blocking the tools from properly writing/reading files.

Edited November 13, 2018 by sheson

Bullfye · December 21, 2019

Hey guys

Have a problem generating the Dyndolod after Texgen generating

keeps giving me a error that I can not understand since my Skyrim SE setup is exactly the same as the previous Dyndolod ..

I leave you the Log ..I understood that one error was related to a n.dds file but then found another ...

my log

DynDOLOD_SSE_log.txt

sheson · December 22, 2019

Exception in unit userscript line 350: Executing TexConv returned error C0000135: "D:\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -f BC7_UNORM -bcquick -o "D:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD" "D:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD\DynDOLOD_Tamriel00.dds"

Install/Update Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019

Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which DynDOLOD.exe/TexGen.exe (x86) or DynDOLODx64.exe/TexGenx64.exe (x64) is used. LODGen.exe will print an explanatory message in case it is missing. Texconv.exe will fail with error C0000135.

Edited January 18, 2020 by sheson

Bullfye · December 22, 2019

Exception in unit userscript line 350: Executing TexConv returned error C0000135: "D:\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -f BC7_UNORM -bcquick -o "D:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD" "D:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD\DynDOLOD_Tamriel00.dds"

Install/Update Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019

Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which DynDOLOD.exe/TexGen.exe (x86) or DynDOLODx64.exe/TexGenx64.exe (x64) is used. LODGen.exe will print an explanatory message in case it is missing. Texconv.exe will fail with error C0000135.

Thanks will go for that and see if its all ok ..

thank you so much for the reply and help ..

Bullfye · December 22, 2019

Sorry about the double post..

It worked flawlessly..

Thank you so much for the help and advise ...

couldn't see that for myself..

At least for a time until eventually figure out that was the problem..

Thanks for your hard work matey..

ArtistDavid · December 30, 2019

I am following this youtube tutorial:

When I run DynDoLOD it stops suddenly and i get no pop ups.

Here are the error files:

bugreport.txt: https://pastebin.com/YfC0250q

DynDOLOD_SSE_log: https://pastebin.com/P7ADMuHg (Part 1) and https://pastebin.com/mJPu71KY (Part 2)

Thanks for anyone who takes their time to look at these. I have no idea what to make of it.

sheson · December 30, 2019

From the log:

Exception in unit userscript line 350: Executing TexConv returned error C0000135: "C:\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -f BC7_UNORM -bcquick -o "C:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD" "C:\DynDOLOD\DynDOLOD_Output\Textures\DynDOLOD\LOD\DynDOLOD_Tamriel00.dds"

Check log lines above the exception for additional hints. Check the FAQ and search official forum http://forum.step-project.com/forum/101-shesons-dyndolod-support/ for those errors.

If you search the forum for the error as suggested you find this thread I moved the post to, which has the answer above.

Edited December 30, 2019 by sheson

TheInfinityComplex · January 5, 2020

Dear all,

I am new to the modding scene in the sense that I truly want my game to run well this time around, and have taken care thus far to read every mod description to actually achieve the results I would like, however I'm stuck with this error code from dyndolod:

"] error: [tamriel] trees lod generation error: executing texconv returned error c0000135: "c:\modding\modding tools\dyndolod\edit scripts\texconvx64.exe"

My log and the guide I am following on reddit are linked below. Any help would be very much appreciated!

Link to Guide:

https://old.reddit.com/r/skyrimmods/comments/bw7nuc/dyndolod_install_for_dummies_its_really_not_that/

Link to Log (alternatively, file is attached):

https://file.io/d1hPd2

TheInfinityComplex · January 5, 2020

Dear all,

I am new to the modding scene in the sense that I truly want my game to run well this time around, and have taken care thus far to read every mod description to actually achieve the results I would like, however I'm stuck with this error code from dyndolod:

"] error: [tamriel] trees lod generation error: executing texconv returned error c0000135: "c:\modding\modding tools\dyndolod\edit scripts\texconvx64.exe"

My log and the guide I am following on reddit are linked below. Any help would be very much appreciated!

Link to Guide:
https://old.reddit.com/r/skyrimmods/comments/bw7nuc/dyndolod_install_for_dummies_its_really_not_that/

Link to Log (alternatively, file is attached):
https://file.io/d1hP

I found another fix through a separate forum post. I'll link it here in case others can't find it and make their way here somehow (thanks Sheson!):

https://forum.step-project.com/topic/14518-executing-texconv-returned-error-c0000135-vruntime140dll-or-vcruntime140-1dll-was-not-found/

dire · January 8, 2020

date/time : 2020-01-09, 02:18:49, 890ms

computer name : DESKTOP-

user name : -- <admin>

registered owner : --

operating system : Windows 10 x64 build 18362

system language : English

system up time : 4 days 7 hours

program up time : 39 seconds

processors : 4x Intel® Core i3-8350K CPU @ 4.00GHz

physical memory : 1844/8153 MB (free/total)

free disk space : (C:) 19.73 GB (D:) 403.28 GB

display mode : 1920x1080, 32 bit

process id : $2b74

allocated memory : 1.35 GB

largest free block : 131025.96 GB

executable : DynDOLODx64.exe

exec. date/time : 2019-12-18 13:00

version : 2.76.0.0

compiled with : Delphi 10.2 Tokyo

madExcept version : 5.0.0

callstack crc : $c1e15fd4, $fff26c50, $fd3b8bc4

count : 3

exception number : 1

exception class : Exception

exception message : [Tamriel] Trees LOD generation error: Executing TexConv returned error C0000135: "D:\DynDOLOD\Edit Scripts\Texconvx64.exe" -nologo -y -sepalpha -f DXT1 -bcdither -o "D:\DynDOLOD\DynDOLOD_Output\Textures\Terrain\Tamriel\Trees" "D:\DynDOLOD\DynDOLOD_Output\Textures\Terrain\Tamriel\Trees\TamrielTreeLod.dds".

main thread ($1ec8):

013a2c36 +2076 DynDOLODx64.exe wbLOD 4491 +318 wbGenerateLODTES5

015f3909 +01c9 DynDOLODx64.exe wbScriptAdapterDynDOLOD 12253 +24 CreateTreeLOD

0160b63c +007c DynDOLODx64.exe wbScriptAdapterDynDOLOD 15046 +2 Dyn_CreateTreeLOD

013ed8cf +00bf DynDOLODx64.exe JvInterpreter 4316 +10 GetFun

013ee2eb +031b DynDOLODx64.exe JvInterpreter 4514 +96 TJvInterpreterAdapter.GetValue

013f498c +009c DynDOLODx64.exe JvInterpreter 6277 +4 TJvInterpreterExpression.GetValue

013f5ace +00ae DynDOLODx64.exe JvInterpreter 6568 +17 TJvInterpreterFunction.GetValue

013fb785 +0045 DynDOLODx64.exe JvInterpreter 8277 +1 TJvInterpreterUnit.GetValue

013f3ab0 +0260 DynDOLODx64.exe JvInterpreter 6062 +31 TJvInterpreterExpression.InternalGetValue

013f1b69 +04d9 DynDOLODx64.exe JvInterpreter 5620 +14 Expression

013f2442 +0db2 DynDOLODx64.exe JvInterpreter 5738 +132 Expression

013f2b8f +005f DynDOLODx64.exe JvInterpreter 5830 +5 TJvInterpreterExpression.Expression1

013f2cb9 +0039 DynDOLODx64.exe JvInterpreter 5852 +4 TJvInterpreterExpression.Expression2

013f7320 +0030 DynDOLODx64.exe JvInterpreter 7031 +2 TJvInterpreterFunction.InterpretIf

013f5d29 +0139 DynDOLODx64.exe JvInterpreter 6618 +18 TJvInterpreterFunction.InterpretStatement

013f7261 +0111 DynDOLODx64.exe JvInterpreter 7015 +19 TJvInterpreterFunction.InterpretBegin

013f5d1f +012f DynDOLODx64.exe JvInterpreter 6616 +16 TJvInterpreterFunction.InterpretStatement

013f7356 +0066 DynDOLODx64.exe JvInterpreter 7037 +8 TJvInterpreterFunction.InterpretIf

013f5d29 +0139 DynDOLODx64.exe JvInterpreter 6618 +18 TJvInterpreterFunction.InterpretStatement

013f8ef3 +0103 DynDOLODx64.exe JvInterpreter 7580 +24 TJvInterpreterFunction.InterpretTry

013f5d63 +0173 DynDOLODx64.exe JvInterpreter 6632 +32 TJvInterpreterFunction.InterpretStatement

013f7261 +0111 DynDOLODx64.exe JvInterpreter 7015 +19 TJvInterpreterFunction.InterpretBegin

013f58a9 +0059 DynDOLODx64.exe JvInterpreter 6517 +11 TJvInterpreterFunction.InFunction

013fbd78 +00d8 DynDOLODx64.exe JvInterpreter 8368 +14 TJvInterpreterUnit.ExecFunction

013fb984 +0244 DynDOLODx64.exe JvInterpreter 8308 +32 TJvInterpreterUnit.GetValue