lekvarik

and i can run the whole setup without DynDolod fine on default Crash Fixes ini with only OSallocators on. No need for custommemoryblocks.

I have CustomMemoryBlocksTotalSizeMB=128 and the console blocks show under 90% and some under70%.. When AlighHeapAllocate=1 i crash even sooner than when its set to 0. I tried lowering TexGen to 128 and DynDolod to medium but even then i get freeze and even on slimed down LO 3550/2950VRAM. I have ENBOOST configured and tried to set all the things needed via STEP guides. People on SRLE LOTD Reqtified forum where i tried to solve this are helpful and some run all the setup on weaker systems. If its nothing more to be done that escapes them and me...my conclusion is that my specs /may they be better than others runing SRLE setup/ simply cant run even lowered LO with DynDolod. But without its no problem even running all the modlist.

Hi! Im geting memory allocation errors everytime i install DYNDOLOD to my LO. I installed SRLE LOTD Reqtified large modlist. I got memory allocation error few /1-5/ minutes ingame and game freezes with need of task manager quit. I tought its too heavy on my system /i7 4770K 3.5,GTX 980 4GB,16GB RAM,SSD, Win7/. Skyrim Performance Monitor shows max memory 4150MB, VRAM 3670MB. So i trimed down City,Flora,Texture mods. Now SPM shows max values RAM 3550MB,VRAM 2950MB...so definetly lower load. Thing is even on lower load if i load DYNDOLOD in i get the same memory allocation error and Skyrim freezes. Without DYNDOLOD i can roam around Skyrim on trimed down LO and even on full modlist of SRLE LOTD Reqtified. Installing DYNDOLOD doesnt change SPM monitored values of my system load very much. I used DYNDOLOD before with no problems and no noticeable performance impact. Im merging and unmerging /installing uninstalling and testing the whole LO few days now and just today found the DYNDOLOD somhow does this. Is there something to be done that i cant find or escapes my attention? So why is DYNDOLOD causing my memory problems if i have enough of memory and even on much lower strain of my system?

The load vas similar when running DYNDOLOD and when it was disabled. I mean in SPM monitoring. So no different max values... maybe 100-200MB /still under 3700MB/ on Vram. RAM diference vas unde 100/around 4150MB/. But advices here slowly kicking me into solution so i do the DYNDOLO and TEXGEN low res experiment.

paul666root, on 08 Nov 2016 - 9:28 PM, said: Only Skyrim. Sometimes freeze right after error message and sometimes i just mouseclick and error message is hidden behind Skyrim and i can roam some more but then freeze. Even with ENB off and just ENBOOST its the same. I think GPU temp was 74 C and yes it was 100% usage. Only Skyrim? I dont play any other games... Otherwise my PC dont freez ever. DIdnt tried vanilla. I played before modded Skyrim and it runs fine. I try it just to be sure. VRAm in SPM was max3669 i think? Disabled Noble Skyrim and ENB got me on around 3300 I dont run Official HighRes. And this is my third install of this setup /initial install,unmerging heavy mods,remerging them back/ . Im not doing it fourth time . Tried before without ETAC and SFO but still i got Memory allocation error. lekvarik, on 08 Nov 2016 - 10:28 PM, said: Ok. After hours of testing as you recommended. I first uninstalled all the had and city mods. I started adding one by one /meaning whole merged packs/ to get what are the most heavy mods for my PC. I figured out that without TAFM , ECTV, Noble Skyrim , LECM my game runs fine. I started as before docks in Solitude, check Dragonborn Museum and embark thru Dragon Bridge to Whiterun. All runs fine. But! When i added DynDolod to the slimed down setup, i got same memory allocation error. So i figured my problem is with DynDolod. Then i added removed mods to get the whole setup as before just without DynDOLOD. And i traveled from Solitude thru heavy Dragon Bridge /around 30fps with ECTV/,checked Meekos cabin /it was always heavy area the woods there/ and runed into Whiterun without slightest problem. SPM showed max values as follows: Memory 4161MB // VRAM 3551MB // CPU 73% // GPU 99% // GPU Temp 76 C // The values seems to me not very different than with DynDolod installed before when i got the error messages and freezes. It is posible to DYNDOLOD have such impact that it has such effect even on slimed down LO?

Vanilla Skyrim + Vivid Weathers/Tetrachromatic ENB + Noble Skyrim + WATER runs fine. SPF did disable some ENB efects tough. That didnt happen before. GPU max is on 53% ussage ,max VRAM 1294 MB ,max temp 66 C , Memory max is 1357MB ...

Only Skyrim. Sometimes freeze right after error message and sometimes i just mouseclick and error message is hidden behind Skyrim and i can roam some more but then freeze. Even with ENB off and just ENBOOST its the same. I think GPU temp was 74 C and yes it was 100% usage. Only Skyrim? I dont play any other games... Otherwise my PC dont freez ever. DIdnt tried vanilla. I played before modded Skyrim and it runs fine. I try it just to be sure. VRAm in SPM was max3669 i think? Disabled Noble Skyrim and ENB got me on around 3300 I dont run Official HighRes. And this is my third install of this setup /initial install,unmerging heavy mods,remerging them back/ . Im not doing it fourth time . Tried before without ETAC and SFO but still i got Memory allocation error.

No SMC. Only main mod setup CORE + OPTIONALS. Specs : i7 4770k 3.5 , GTX 980 4GB, 16 GB RAM , SSD , Windows 7

Yes. But Skyrim Performance Monitor and AIDA64 didnt show anything wrong. Actualy SPM RAM use was around 4 GB. I dont know if its still true that Skyrim as 32 bit aplicaton has 4GB limit. Or its bypased by CrashFixes memory allocation? Thats the only reason posibly causing my problems. To my mind atleast. But if the setup is consuming such memory for me to cause problems and not for others... Man i dont realy know whats wrong.

I did reinstall SKSE,ENBOOST,CrashFixes,BugFixes,... Tried to install ENB manualy to Skyrim folder /deleted ENB Organizer/. Configured ENBOOST in various ways via this guide,STEP and recent gudies on nexus. All the settings in CrashFixes that my error message point to i tried also. As hard i want to play this setup nothing get me rid of theese freezes/crashes. Skyrim fails to allocate memmory even when i got plenty RAM and enough VRAM. I never got errors when merging. Only the ones that are in the guide /some nevmes messages/. Its some kind of speed build up in memmory. I run from Dragon Bridge /with all the mods my fps got to around 30/ fine which is heavyer area than the meadow behind the actual bridge on the way to Whiterun /fps 55-60/. And my game froze there and not in town. Its simply beyond me and i got to chew it up. Specs are good but thats not enough apparently. Maybe the problem is between monitor and chair :) If thats the case, i have exhausted all options known / newly learnt today and search enthusiasm. I cant find the problem. All the different setting i tried lead to same result which is freezing Skyrim after few minutes ingame.

Thats it... I must uninstall this. I didnt find a way around Memory allocation error freeze. Even disabling Noble Skyrim and ENB Graphics (leaving only ENBOOST on ) gave me the same freeze. Conclusion? My system simply cant run this setup even as some here told me they run it on weaker systems.

Im just running to the left of Dragon Bridge where some necromancer mixes his potions. Not too taxing place i think but still i get freeze. I got Strix ASUS card. So vents only starting above 60 C. I think my card is not even allowed to heat up if im on average 5 min ingame. Then freeze... The values on blocks are fine... Not once i saw 100%... Max was 95 and then i raised the value by 10 just to be sure. SPM shows no different values when freeze happens as when roaming around...

https://www.nexusmods.com/skyrim/mods/74330/? in optional files look for Night Eye Dark Vision Mod

Im out of ideas. Nothing that i tried fixed my freezes. I tried even to disable noble skyrim which gave me another 200-250MB VRAm but game still freezes...

OK. I installed SPM roam around ingame about 5 mins and here is the picture of it : https://imgur.com/gallery/6P0th Ingame max VRAM usage was 3669. So its not VRAM ( GTX980 4GB ) . But GPU usage was highest value 100% and highest temp 74 Celsius. Is it too high? I dont know about theese things. CustomMemoryBlockTotalSizeMb=100 an i got one line 95% and the rest was under 90%. There was same error but mouseclicking made Skyrim playable without black objects as they were before. Game continued runnig smoothly... Then Skyrim froze without message and i had to task manager from it. Will do more testing. There are some changes in right direction i think ( No black objects and game playable after error ) but error message is still there for some reason.

I got 6 lines i guess ? All of them have value aroun 50-65%. I was raising ReservedMemorySizeMb from 128 to 512 and on 384 game didnt froze but CTD without any error message. On 512 again freeze for few seconds , mouse clicking erased the message and i could move but : https://imgur.com/a/8mijq he game looked like this... and i must exit via ctrl+alt+del not via menu.

lekvarik, on 07 Nov 2016 - 3:14 PM, said: I did try. still Skyrim froze. Tried ReservedMemorySizeMb 256 and game no longer froze but CTD without any error message. Im thinking atleast some change. Tried to set 384 again got freez and previous error message. Raised the value to 512 and Skyrim after a while of playing popped up error message about memory allocation as before but mouse clicking erased error and game was playable. Playable but some objects were pitch black as without textures. Image of it : https://imgur.com/a/8mijq Ingame console show some percentage in few lines... What do they mean? All the lines have value all around 50-65%

i did set it to 128. But still about the same time my game freezes as it was when the value was 64

lekvarik, on 07 Nov 2016 - 12:38 PM, said: Hardware is working fine. I even raised customMemoryBlock to 128. Game runs fine but as time goes something is building up in it to cause the freeze. Prior to freeze there is nothing suspicious and everything runs fine. Maybe raising CustomMemoryBlocks value further? Or enblocal setting tweaking somhow would help??? Is definetly something with memory... What is the value in the error message ,,alignment of object being allocated was 16777343 / 0 " ? Didnt tried that yet. My setting is : [MEMORY] ExpandSystemMemoryX64=false ReduceSystemMemoryUsage=true DisableDriverMemoryManager=false DisablePreloadToVRAM=false EnableUnsafeMemoryHacks=false ReservedMemorySizeMb=256 VideoMemorySizeMb=11734 EnableCompression=false AutodetectVideoMemorySize=false

I remerged previously uninstalled mods to get SRLE Reqtified core + optionals running. Im not running any SMC or other textures. All installed except Notice Board Redefined are 2k or less. Reinstalled MB chipset drivers and GPU drivers. Good news is im running the game 10-20 min in before old error message starts bug me again and my game FREEZES with error message popped up : Skyrim has failed to allocate memory! Possibly running out of memory. Size / alignment of object being allocated was 16777343 / 0. Some things you can try: 1. Make sure ReduceSystemMemoryUsage=true is set in enblocal.ini - if you don't have ENB then install ENBoost and enable this option. 2. Try set AlignHeapAllocate=0 in CrashFixPlugin.ini - if you get additional crashes then put back to 1. 3. If it's during ShowRaceMenu then close the menu from time to time to free memory. 4. Enable CustomMemoryBlock in CrashFixPlugin.ini to reduce memory fragmentation. 5. If it's during ShowRaceMenu then disable UseOSAllocators=1 and re-enable after character creation is completed. My specs 4770K,GTX9804GB,SSD, Win 7,16GB RAM. Game fps is 60 indoors, outdoors 60-45 fps and in heavy areas (forests, cities) it drops to around 30fps. People here runn this setup on weaker specs so what am i missing here? Note that i dont know if would be of any help : When AlignHeapAllocate=0 , game runs longer before freezing than when AlignHeapAllocate=1 . When enabled it freezes to 5 minutes.

Thank you :)

Installing DYNDOLOD requires Vanilla Billboards but they are not as one of downloaded files in the Guide. Is that intentional? They are not needed?

I installed my drivers from cd i got with motherboard. I didnt know that they may be corrupted by Windows installation or so...

Ok Then... Now im going to remerge the merges that i merged without uninstalled mods. When im on point zero i will try to find out the cause of my freezes. Yes. The error message is : Skyrim has failed to allocate memory! Possibly running out of memory. Size / alignment of object being allocated was 11184944 / 16. Some things you can try: 1. Make sure ReduceSystemMemoryUsage=true is set in enblocal.ini - if you don't have ENB then install ENBoost and enable this option. 2. Try set AlignHeapAllocate=0 in CrashFixPlugin.ini - if you get additional crashes then put back to 1. 3. If it's during ShowRaceMenu then close the menu from time to time to free memory. 4. Enable CustomMemoryBlock in CrashFixPlugin.ini to reduce memory fragmentation. 5. If it's during ShowRaceMenu then disable UseOSAllocators=1 and re-enable after character creation is completed. Will trye the drivers reinstal.

I tought so too... But maybe my setup is not conditioned enough for such big modlist :) I never had above 250 mods...