O0mix0O

I think I have messed around with my current save too much :/ Started a new game and played for a few hours with no crashes (with the mod list + load order in op) No matter :) Thanks again for your help!

Thanks for your response. I'm unsure if it's the houses because the crashes have only happened while entering vanilla buildings... Meshes sounds like a good place to start, I'll investigate! Failing that, I'll start a new game and see if the problem persists :) [EDIT] Any ideas how I would go about checking mesh sizes without going into each individual mod folder and checking? Thanks :)

Hi all, I had a solid mod list with no CTDs, installed 17 new mods, a few hours later I am getting crashing when going through a door (such as "Open The Bee and Barb", "Open Whiterun" etc.) These CTDs can be after going through 4 doors, to 24 doors. Before I resort to disabling each one individually, do any of the bold mods (in the mod list) raise any alarm bells? Have tried removing Helgen Reborn & turning off autosaves. Many thanks! PC Specs Mod List Load Order

Good call! I turned off the ENB and the blue disappeared. Gunna have a mess with the settings and see what I can come up with :P Thanks for your help! EDIT: Played around with ENB settings to no avail, however changing my TV settings (brightness, colour, contrast) changed the blue to black :) Project ENB does request you lower ingame brightness to the minimum, but obviously my tv brightness was still too high! Thanks again for pointing me in the right direction :D

SOLVED: Turned on the PC today and loaded Skyrim, problem solved... IDK why... Maybe my TV was too hot or something? (I have no idea, don't listen to me I'm an idiot)

Hi all, Noticed that some of the darker shadows are looking dark blue and I'm unsure why. I believe this problem started today as it was obvious enough to distract me. I haven't installed any new mods recently that would affect the lighting. I tried changing the gamma, brightness and settings on my TV, all to no avail. I'm using Project ENB + ELFX + ELE Let me know if you need any more info :) Thanks! PC Specs Mod List Load Order

Hi all, In the [iNPUT] section of enblocal there are various toggles and commands. Would it be possible to create custom toggle options such as enable/disable Temporal AA? (Reason for asking is because I get ghosting using Project ENB when near torches and would like to be able to turn off TAA at night :) )

Thanks for your reply. I changed the size to 10240 but that didn't change anything :/ Probably a noob question but what do you mean by resetting my ini files? Thanks :)

Hi all, I recently upgraded my computer's GPU from an R9 280x to an R9 290. I noted some of the FPS I was getting in certain locations, saved my game, changed GPU, loaded these saves and compared my current FPS to the ones I had written down. There was NO increase in FPS at all. In ENBlocal I changed Videomemorysizemb from 3072 to 4096 I assumed this would be all I needed to do... Any ideas please? :D Thanks :) (Haven't included BOSS list/Mod list as I didn't think they were relevant but correct me if I'm wrong :) ) PC specs CPU - AMD FX8350 - 4.4GHz + Cooler Master Hyper 212 Evo CPU cooler GPU - MSI R9 290 RAM - Kingston red HyperX 8GB - 1600MHz Motherboard - Asus M5A97 LE R2.0 HDD - Western Digital Blue 1TB - Seagate 320GB SSD - OCZ 128GB Case - Zalman Z11 Plus PSU - Corsair CX 600W - 80+ Bronze

Did you try this setting : [LIMITER] WaitBusyRenderer=true It works well for me and removes micro stuttering at the cost of some fps drop Yeah I did, it's a shame it gives the fps drop as I'm running at 28-35 fps in crowded areas and the few frames that are lost really make a difference :/ I hope someone comes up with something to negate the stuttering effect but leave fps in-tact. I'm unsure if it's an ENB thing or not, maybe someone NOT running an ENB could tell us if they have stutters? I'm gunna wait until V.252 and see if upgrading to that helps anything, fingers crossed it does. EDIT: Just upgraded from 250 to 251 and the stuttering has decreased but hasn't gone (This is with WaitBusyRender set to false)

So the new enb binary you mean? It's definitely enb because I get 60 fps when enb is turned off. I'll try the new enb binary What ENB + Binary are you using? I'm using Realvision 250 + ENBseries 250

Yea, someone above did. It was the frame limiter mod that runs through a proxy through ENBlocal.ini. Unfortunately, I can't use it because I'm already using a proxy .dll :-/.Lame :( In my ENBlocal I set WaitBusyRender to true and it seems to have sorted it, but my fps have dropped by a few :/

Hey all, I've tried borderless window in enblocal, one tweak and a combination of both but nothing works :( Did anybody end up finding a solution to the stuttering?

Once again asking the lovely community for some help! Just did a complete reinstall and did S.T.E.P 2.2.8 to the letter but now my game keeps stuttering and I also don't have the 3D ripes supplied by SMIM. Stuttering - I have an AMD card so followed the settings for borderless window in ENBoost but it did not fix it, I then installed one tweak and set the borderless window option to 2 (because I'm using Realvision ENB) but that didn't fix it and I also ticked windowed mode in Skyrim launcher. Ropes - I installed it following STEP's instructions and obviously selected 3D Ropes no fade option but they are not in Riverwood. I installed ELFX and the SMIM meshes (even though I don't think they conflict with ropes) and I put the ropes meshes in the MO overwrite folder but they still don't appear :( If anyone could give me some advice regarding either problem I'd really appreciate it :)

No, I uninstall RWT and re-activate WATER EDIT: Yes I do :(

The crash happens in Whiterun but I start in Riverwood to give me numerous water types :) I was but then I reverting to a different Mod Organiser profile without AOS, just RWT :) Just wondering how to replace it w/ RWT :)

Hi all, I followed STEP 2.2.7 and am very happy but now I see that WATER has been replaced by RWT. I'm using MO and have tried de-activating WATER, installing RWT and activating it but I get crashes every few minutes (Tested by spawning in Riverwood, run to Whiterun and crash around the bridge) I have used BOSS but still unsure as to what to do. Any help pleasE? Thanks :)

Thanks very much, I'll look into that :)

I really need to record some footage though, could you suggest any good recording programs? Even if they're paid? I have an AMD R9 280x so shadowplay isn't an option :/

Oh :( Yeah plays fine without recording and plays fine when recording with Bandicam/Open Broadcaster. Yeah, I installed the injector version as suggested by Alyen :)

I have no idea what that is but it sounds bad... Any ideas?

Alyen, I did as you suggested and installed the injector version and I can now use AB in Skyrim, so thank you. HOWEVER. Whenever I try to record, after a minute or so the game either crashes or everything turns black, imagine filled black meshes, then it crashes. Any ideas friend? Thanks again :) Before I forget, I made sure the enb was installed correctly, it did it twice to be sure, and ENBhost is set to run with administrative rights. I get an error on start up saying the enbhost.exe failed, Im using realvision and I also know it's nothing to do w/ the stability of my game, I checked by spawning 10 dragons in solitude :)

Thanks for the tip. I'll try using the injector version and update you :)

Hi all, I need to record some skyrim footage for my university course but because I have an ENB + 100s of mods, crashes on startup. I've done a lot of looking around but can't find a viable solution :/ I have an AMD card btw so Shadowplay isn't an option. Also, I can't uninstall ENB/mods because my recordings have to be very different from vanilla Skyrim. Please help! Thanks everyone :)