sperrepolken

Hi Sheson, I am so new here I even read the forum names wrong. I think you are right. I used realtemp to measure the processor heat and when the LODGen.exe comes up the temperature just shoots up to over 100 degrees celsius from 50 - 70. The fan never really seem to have time to react because it does not increase in speed while generating the Lods at all. It takes two-three seconds to get to a 100 degrees and it goes back and forth for a while. I had no idea it could go so quick. I am not sure if these values really are correct but at least my system reads it and goes boom. The affinity thing where I check the processor seems to not work since it restarts the LODGen.exe restarts several times and I think the affinity also goes to default 8 cores once it restarts. I have an i7 4790K, the clock is not touched and the stock cooler is still on it. Haven't had time to change it yet. I am going to try to manually raise the fan speed during the LODgenerating and see if it works. I will post with result. Thanks! Edit: So, I went into BIOS and put my fan to operate 100 %. When LodGen came up I put it to only use 2-3 out of 8 cores. It worked through all the files! Yay! However, I was measuring the CPU temp and it was very strict on 100 degrees on both core 1 and 2. It is on idle 31 degrees, when calculating in the script it jumps between 50 and 80 and when LodGen starts it jumps between 80 and 100. This can not be normal? Will see if I can get another cooler than the stock one soon. Thanks again!

I have been setting up all the mods from scratch according to the guide in Skyrim Revisited LE. Everything works fine and I can run the game without issues. However, I have not been able to apply this mod yet. Whenever I run Tes5Edit and choose the script "DynDOLOD Worlds" my computer simply crashes. No error message. It just restarts. Tes5Edit works through the script just fine for a couple of the worlds, like Blackreach and DeepwoodRedoubtWorld. Now, I haven't tried all worlds yet but DLC01FalmerValley, Tamriel and Falskaar causes the issue at least. It always happen when the command prompt is up and the script is working on creating the Lods. It creates some of them, there are files that goes to the output folder but at some point, 30 seconds in approximately, the PC dies. I am able to play my modded SRLE profile just fine and it goes very smooth but the lods far away is a little crappy comparing to the rest of what I see because I miss this mod. Thane, or anybody, do you have an idea what could cause this? I couldn't find anyone with this issue on the forums. I will include my load order in the link below. https://www.dropbox.com/s/auk5awrq9btrge1/loadorder.txt?dl=0